>Did you prefill the image? Amplification could come from cluster allocation.
Yes!
I forgot to mention that I created the qcow2 image with 'preallocation=metadata', and I have allocated
the data blocks with dd in VM.
Creating image in host:
qemu-img create -f qcow2 -preallocation=metadata test.qcow2 100G
Allocating the blocks in VM:
dd if=/dev/zero of=/dev/vdb bs=1M
where vdb is the target image.
At 2014-06-23 11:01:20, "Fam Zheng" <address@hidden> wrote:
>On Mon, 06/23 10:06, lihuiba wrote:
>> Hi, all
>>
>>
>> I'm using a qcow2 image stored on a SSD RAID1 (2 x intel S3500), and I'm benchmarking the
>> system using fio. Although the throughput in VM (with KVM and virtio enabled) is acceptable (67%
>> of thoughtput in host), the IOPS performance seems is extremely low ---- only 2% of IOPS in host.
>>
>>
>> I was initially using qemu-1.1.2, and I also tried qemu-1.7.1 for comparison. There was no significant
>> difference.
>>
>>
>> In contrast, raw image and LVM perform very well. They usually achieve 90%+ of throughput and
>> 60%+ of IOPS. So the problem must lie in the QCOW2 image format.
>>
>>
>> And I observed that, when I perform 4KB IOPS benchmark in VM with a QCOW2 image, fio in VM reports
>> it is reading 9.x MB/s, while iostat in host reports the SSD is being read 150+ MB/s. So QEMU or QCOW2
>> must have amplified the amount of read by nearly 16 times.
>>
>>
>> So, how can I fix or tune the performance issue of qcow2?
>
>Did you prefill the image? Amplification could come from cluster allocation.
>
>Fam
>
>>
>>
>> Thanks!
>>
>>
>>
>>
>> PS:
>> 1. qemu parameters:
>> -enable-kvm -cpu qemu64 -rtc base=utc,clock=host,driftfix=none -usb -device usb-tablet -nodefaults -nodefconfig -no-kvm-pit-reinjection -global kvm-pit.lost_tick_policy=discard -machine pc,accel=kvm -vga std -k en-us -smp 8 -m 4096 -boot order=cdn -vnc :1 -drive file=$1,if=none,id=drive_0,cache=none,aio=native -device virtio-blk-pci,drive=drive_0,bus=pci.0,addr=0x5 -drive file=$2,if=none,id=drive_2,cache=none,aio=native -device virtio-blk-pci,drive=drive_2,bus=pci.0,addr=0x7
>>
>>
>> 2. fio parameters for IOPS:
>> fio --filename=/dev/vdb --direct=1 --ioengine=libaio --iodepth 32 --thread --numjobs=1 --rw=randread --bs=4k --size=100% --runtime=60s --group_reporting --name=test
>>
>>
>> 3. fio parameters for throughput:
>> fio --filename=/dev/vdb--direct=1 --ioengine=psync --thread --numjobs=3 --rw=randread --bs=1024k --size=100% --runtime=60s --name=randread --group_reporting -name=test
>>
>>
>>
>