qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 2/3] virtio-ccw: Include standby memory when calc


From: Matthew Rosato
Subject: [Qemu-devel] [PATCH v5 2/3] virtio-ccw: Include standby memory when calculating storage increment
Date: Wed, 25 Jun 2014 10:26:59 -0400

When determining the memory increment size, use the maxmem size if
it was specified.

Signed-off-by: Matthew Rosato <address@hidden>
---
 hw/s390x/s390-virtio-ccw.c |   46 ++++++++++++++++++++++++++++++++++++--------
 qemu-options.hx            |    3 ++-
 target-s390x/cpu.h         |    3 +++
 3 files changed, 43 insertions(+), 9 deletions(-)

diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index 42f5cec..e736b24 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -17,6 +17,7 @@
 #include "ioinst.h"
 #include "css.h"
 #include "virtio-ccw.h"
+#include "qemu/config-file.h"
 
 void io_subsystem_reset(void)
 {
@@ -84,17 +85,35 @@ static void ccw_init(MachineState *machine)
     ram_addr_t my_ram_size = machine->ram_size;
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *ram = g_new(MemoryRegion, 1);
-    int shift = 0;
+    sclpMemoryHotplugDev *mhd = init_sclp_memory_hotplug_dev();
     uint8_t *storage_keys;
     int ret;
     VirtualCssBus *css_bus;
-
-    /* s390x ram size detection needs a 16bit multiplier + an increment. So
-       guests > 64GB can be specified in 2MB steps etc. */
-    while ((my_ram_size >> (20 + shift)) > 65535) {
-        shift++;
+    QemuOpts *opts = qemu_opts_find(qemu_find_opts("memory"), NULL);
+    ram_addr_t pad_size = 0;
+    ram_addr_t maxmem = qemu_opt_get_size(opts, "maxmem", my_ram_size);
+    ram_addr_t standby_mem_size = maxmem - my_ram_size;
+
+    /* The storage increment size is a multiple of 1M and is a power of 2.
+     * The number of storage increments must be MAX_STORAGE_INCREMENTS or 
fewer.
+     * The variable 'mhd->increment_size' is an exponent of 2 that can be
+     * used to calculate the size (in bytes) of an increment. */
+    mhd->increment_size = 20;
+    while ((my_ram_size >> mhd->increment_size) > MAX_STORAGE_INCREMENTS) {
+        mhd->increment_size++;
+    }
+    while ((standby_mem_size >> mhd->increment_size) > MAX_STORAGE_INCREMENTS) 
{
+        mhd->increment_size++;
     }
-    my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
+
+    /* The core and standby memory areas need to be aligned with
+     * the increment size.  In effect, this can cause the
+     * user-specified memory size to be rounded down to align
+     * with the nearest increment boundary. */
+    standby_mem_size = standby_mem_size >> mhd->increment_size
+                                        << mhd->increment_size;
+    my_ram_size = my_ram_size >> mhd->increment_size
+                              << mhd->increment_size;
 
     /* let's propagate the changed ram size into the global variable. */
     ram_size = my_ram_size;
@@ -109,11 +128,22 @@ static void ccw_init(MachineState *machine)
     /* register hypercalls */
     virtio_ccw_register_hcalls();
 
-    /* allocate RAM */
+    /* allocate RAM for core */
     memory_region_init_ram(ram, NULL, "s390.ram", my_ram_size);
     vmstate_register_ram_global(ram);
     memory_region_add_subregion(sysmem, 0, ram);
 
+    /* If the size of ram is not on a MEM_SECTION_SIZE boundary,
+       calculate the pad size necessary to force this boundary. */
+    if (standby_mem_size) {
+        if (my_ram_size % MEM_SECTION_SIZE) {
+            pad_size = MEM_SECTION_SIZE - my_ram_size % MEM_SECTION_SIZE;
+        }
+        my_ram_size += standby_mem_size + pad_size;
+        mhd->pad_size = pad_size;
+        mhd->standby_mem_size = standby_mem_size;
+    }
+
     /* allocate storage keys */
     storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
 
diff --git a/qemu-options.hx b/qemu-options.hx
index ff76ad4..168dd58 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -225,7 +225,8 @@ DEF("m", HAS_ARG, QEMU_OPTION_m,
     "                size: initial amount of guest memory (default: "
     stringify(DEFAULT_RAM_SIZE) "MiB)\n"
     "                slots: number of hotplug slots (default: none)\n"
-    "                maxmem: maximum amount of guest memory (default: none)\n",
+    "                maxmem: maximum amount of guest memory (default: none)\n"
+    "NOTE: Some architectures might enforce a specific granularity\n",
     QEMU_ARCH_ALL)
 STEXI
 @item -m address@hidden
diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
index b13761d..ba0e4b4 100644
--- a/target-s390x/cpu.h
+++ b/target-s390x/cpu.h
@@ -1045,6 +1045,9 @@ static inline void cpu_inject_crw_mchk(S390CPU *cpu)
     cpu_interrupt(CPU(cpu), CPU_INTERRUPT_HARD);
 }
 
+/* from s390-virtio-ccw */
+#define MEM_SECTION_SIZE             0x10000000UL
+
 /* fpu_helper.c */
 uint32_t set_cc_nz_f32(float32 v);
 uint32_t set_cc_nz_f64(float64 v);
-- 
1.7.9.5




reply via email to

[Prev in Thread] Current Thread [Next in Thread]