qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v11 1/3] sPAPR: Implement EEH RTAS calls


From: Gavin Shan
Subject: Re: [Qemu-devel] [PATCH v11 1/3] sPAPR: Implement EEH RTAS calls
Date: Fri, 27 Jun 2014 19:53:02 +1000
User-agent: Mutt/1.5.21 (2010-09-15)

On Thu, Jun 26, 2014 at 12:46:50PM +0200, Alexander Graf wrote:
>
>On 26.06.14 12:43, Gavin Shan wrote:
>>On Thu, Jun 26, 2014 at 12:30:16PM +0200, Alexander Graf wrote:
>>>On 26.06.14 03:35, Gavin Shan wrote:
>>>>The emulation for EEH RTAS requests from guest isn't covered
>>>>by QEMU yet and the patch implements them.
>>>>
>>>>The patch defines constants used by EEH RTAS calls and adds
>>>>callback sPAPRPHBClass::eeh_handler, which is going to be used
>>>>this way:
>>>>
>>>>1. RTAS calls are received in spapr_pci.c, sanity check is done
>>>>    there.
>>>>2. RTAS handlers handle what they can. If there is something it
>>>>    cannot handle and sPAPRPHBClass::eeh_handler callback is defined,
>>>>    it is called.
>>>>3. sPAPRPHBClass::eeh_handler is only implemented for VFIO now. It
>>>>    does ioctl() to the IOMMU container fd to complete the call. Error
>>>>    codes from that ioctl() are transferred back to the guest.
>>>>
>>>>Signed-off-by: Gavin Shan <address@hidden>
>>>>---
>>>>  hw/ppc/spapr_pci.c          | 240 
>>>> ++++++++++++++++++++++++++++++++++++++++++++
>>>>  include/hw/pci-host/spapr.h |   7 ++
>>>>  include/hw/ppc/spapr.h      |  33 ++++++
>>>>  3 files changed, 280 insertions(+)
>>>>
>>>>diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
>>>>index 131434b..8712051 100644
>>>>--- a/hw/ppc/spapr_pci.c
>>>>+++ b/hw/ppc/spapr_pci.c
>>>>@@ -422,6 +422,233 @@ static void 
>>>>rtas_ibm_query_interrupt_source_number(PowerPCCPU *cpu,
>>>>      rtas_st(rets, 2, 1);/* 0 == level; 1 == edge */
>>>>  }
>>>>+static int rtas_handle_eeh_request(sPAPREnvironment *spapr,
>>>>+                                   uint64_t buid, uint32_t req, uint32_t 
>>>>opt)
>>>>+{
>>>>+    sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>>>+    sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>>>+
>>>>+    if (!sphb || !info->eeh_handler) {
>>>>+        return -ENOENT;
>>>>+    }
>>>>+
>>>>+    return info->eeh_handler(sphb, req, opt);
>>>>+}
>>>>+
>>>>+static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
>>>>+                                    sPAPREnvironment *spapr,
>>>>+                                    uint32_t token, uint32_t nargs,
>>>>+                                    target_ulong args, uint32_t nret,
>>>>+                                    target_ulong rets)
>>>>+{
>>>>+    uint32_t addr, option;
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    int ret;
>>>>+
>>>>+    if ((nargs != 4) || (nret != 1)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    addr = rtas_ld(args, 0);
>>>>+    option = rtas_ld(args, 3);
>>>>+    switch (option) {
>>>>+    case RTAS_EEH_ENABLE:
>>>>+        if (!find_dev(spapr, buid, addr)) {
>>>>+            goto param_error_exit;
>>>>+        }
>>>>+        break;
>>>>+    case RTAS_EEH_DISABLE:
>>>>+    case RTAS_EEH_THAW_IO:
>>>>+    case RTAS_EEH_THAW_DMA:
>>>>+        break;
>>>>+    default:
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    ret = rtas_handle_eeh_request(spapr, buid,
>>>>+                                  RTAS_EEH_REQ_SET_OPTION, option);
>>>>+    if (ret >= 0) {
>>>>+        rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>>+        return;
>>>>+    }
>>>>+
>>>>+param_error_exit:
>>>>+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>>>+}
>>>>+
>>>>+static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
>>>>+                                           sPAPREnvironment *spapr,
>>>>+                                           uint32_t token, uint32_t nargs,
>>>>+                                           target_ulong args, uint32_t 
>>>>nret,
>>>>+                                           target_ulong rets)
>>>>+{
>>>>+    uint32_t addr, option;
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>>>+    sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>>>+    PCIDevice *pdev;
>>>>+
>>>>+    if (!sphb || !info->eeh_handler) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    if ((nargs != 4) || (nret != 2)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    addr = rtas_ld(args, 0);
>>>>+    option = rtas_ld(args, 3);
>>>>+    if (option != RTAS_GET_PE_ADDR && option != RTAS_GET_PE_MODE) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    pdev = find_dev(spapr, buid, addr);
>>>>+    if (!pdev) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    /*
>>>>+     * For now, we always have bus level PE whose address
>>>>+     * has format "00BBSS00". The guest OS might regard
>>>>+     * PE address 0 as invalid. We avoid that simply by
>>>>+     * extending it with one.
>>>>+     */
>>>>+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>>+    if (option == RTAS_GET_PE_ADDR) {
>>>>+        rtas_st(rets, 1, (pci_bus_num(pdev->bus) << 16) + 1);
>>>>+    } else {
>>>>+        rtas_st(rets, 1, RTAS_PE_MODE_SHARED);
>>>>+    }
>>>>+
>>>>+    return;
>>>>+
>>>>+param_error_exit:
>>>>+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>>>+}
>>>>+
>>>>+static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
>>>>+                                            sPAPREnvironment *spapr,
>>>>+                                            uint32_t token, uint32_t nargs,
>>>>+                                            target_ulong args, uint32_t 
>>>>nret,
>>>>+                                            target_ulong rets)
>>>>+{
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    int ret;
>>>>+
>>>>+    if ((nargs != 3) || (nret != 4 && nret != 5)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    ret = rtas_handle_eeh_request(spapr, buid, RTAS_EEH_REQ_GET_STATE, 0);
>>>>+    if (ret >= 0) {
>>>>+        rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>>+        rtas_st(rets, 1, ret);
>>>>+        rtas_st(rets, 2, RTAS_EEH_SUPPORT);
>>>>+        rtas_st(rets, 3, RTAS_EEH_PE_UNAVAIL_INFO);
>>>>+        if (nret >= 5) {
>>>>+            rtas_st(rets, 4, RTAS_EEH_PE_RECOVER_INFO);
>>>>+        }
>>>>+
>>>>+        return;
>>>>+    }
>>>>+
>>>>+param_error_exit:
>>>>+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>>>+}
>>>>+
>>>>+static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
>>>>+                                    sPAPREnvironment *spapr,
>>>>+                                    uint32_t token, uint32_t nargs,
>>>>+                                    target_ulong args, uint32_t nret,
>>>>+                                    target_ulong rets)
>>>>+{
>>>>+    uint32_t option;
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    int ret;
>>>>+
>>>>+    if ((nargs != 4) || (nret != 1)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    option = rtas_ld(args, 3);
>>>>+    switch (option) {
>>>>+    case RTAS_SLOT_RESET_DEACTIVATE:
>>>>+    case RTAS_SLOT_RESET_HOT:
>>>>+    case RTAS_SLOT_RESET_FUNDAMENTAL:
>>>>+        break;
>>>>+    default:
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    ret = rtas_handle_eeh_request(spapr, buid, RTAS_EEH_REQ_RESET, option);
>>>>+    if (ret >= 0) {
>>>>+        rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>>+        return;
>>>>+    }
>>>>+
>>>>+param_error_exit:
>>>>+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>>>+}
>>>>+
>>>>+static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
>>>>+                                  sPAPREnvironment *spapr,
>>>>+                                  uint32_t token, uint32_t nargs,
>>>>+                                  target_ulong args, uint32_t nret,
>>>>+                                  target_ulong rets)
>>>>+{
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    int ret;
>>>>+
>>>>+    if ((nargs != 3) || (nret != 1)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    ret = rtas_handle_eeh_request(spapr, buid, RTAS_EEH_REQ_CONFIGURE, 0);
>>>>+    if (ret >= 0) {
>>>>+        rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>>+        return;
>>>>+    }
>>>>+
>>>>+param_error_exit:
>>>>+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>>>+}
>>>>+
>>>>+/* To support it later */
>>>>+static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
>>>>+                                       sPAPREnvironment *spapr,
>>>>+                                       uint32_t token, uint32_t nargs,
>>>>+                                       target_ulong args, uint32_t nret,
>>>>+                                       target_ulong rets)
>>>>+{
>>>>+    int option;
>>>>+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>>>+    sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>>>+    sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>>>+
>>>>+    if (!sphb || !info->eeh_handler) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    if ((nargs != 8) || (nret != 1)) {
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    option = rtas_ld(args, 7);
>>>>+    switch (option) {
>>>>+    case RTAS_SLOT_TEMP_ERR_LOG:
>>>>+    case RTAS_SLOT_PERM_ERR_LOG:
>>>>+        break;
>>>>+    default:
>>>>+        goto param_error_exit;
>>>>+    }
>>>>+
>>>>+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>>We don't return an error log, so shouldn't this be
>>>RTAS_OUT_NO_ERRORS_FOUND (or a new name you come up with that fits
>>>better for 1)?
>>>
>>Well, RTAS_OUT_NO_ERRORS_FOUND is correct constant for the return value
>>according to PAPR spec:
>>
>>1: No Error Log Returned
>>
>>Apart from this, anything else I need change? :-)
>
>I didn't spot anything :)
>

Ok. Alex, should I change the code to return RTAS_OUT_NO_ERRORS_FOUND and
then send v12 (next revision) for your further review, or you have more
comments on v11 (current revision)? :-)

        rtas_st(rets, 0, RTAS_OUT_NO_ERRORS_FOUND);

Thanks,
Gavin




reply via email to

[Prev in Thread] Current Thread [Next in Thread]