-----Original Message-----
From: Alexander Graf [mailto:address@hidden
Sent: Thursday, June 26, 2014 3:52 PM
To: Bhushan Bharat-R65777
Cc: address@hidden; address@hidden; address@hidden
Subject: Re: [PATCH 5/5 v5] ppc: Add hw breakpoint watchpoint support
On 26.06.14 09:23, Bharat Bhushan wrote:
This patch adds hardware breakpoint and hardware watchpoint support
for ppc. If the debug interrupt is not handled then this is injected
to guest.
Signed-off-by: Bharat Bhushan <address@hidden>
---
v4->v5
- cleanup in kvmppc_hw_debug_points_init()
- replaced assert in kvm_arch_insert_hw_breakpoint() with return.
This allows gdb to through warning "You may have requested too many
hardware breakpoints/watchpoints.". Now user can remove extra breakpint
and continue.
target-ppc/kvm.c | 238 +++++++++++++++++++++++++++++++++++++++++++++++++++--
--
1 file changed, 223 insertions(+), 15 deletions(-)
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c index
3195491..3347c1b 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -38,6 +38,7 @@
#include "hw/ppc/ppc.h"
#include "sysemu/watchdog.h"
#include "trace.h"
+#include "exec/gdbstub.h"
//#define DEBUG_KVM
@@ -410,6 +411,38 @@ unsigned long kvm_arch_vcpu_id(CPUState *cpu)
return ppc_get_vcpu_dt_id(POWERPC_CPU(cpu));
}
+/* e500 supports 2 h/w breakpoint and 2 watchpoint.
+ * book3s supports only 1 watchpoint, so array size
+ * of 4 is sufficient for now.
+ */
+#define MAX_HW_BKPTS 4
+
+static struct HWBreakpoint {
+ target_ulong addr;
+ int type;
+} hw_debug_points[MAX_HW_BKPTS];
+
+static CPUWatchpoint hw_watchpoint;
+
+/* Default there is no breakpoint and watchpoint supported */ static
+int max_hw_breakpoint; static int max_hw_watchpoint; static int
+nb_hw_breakpoint; static int nb_hw_watchpoint;
+
+static void kvmppc_hw_debug_points_init(CPUPPCState *cenv) {
+ if (cenv->excp_model == POWERPC_EXCP_BOOKE) {
+ max_hw_breakpoint = 2;
+ max_hw_watchpoint = 2;
+ }
+
+ if ((max_hw_breakpoint + max_hw_watchpoint) > MAX_HW_BKPTS) {
+ fprintf(stderr, "Error initializing h/w breakpoints\n");
+ return;
+ }
+}
+
int kvm_arch_init_vcpu(CPUState *cs)
{
PowerPCCPU *cpu = POWERPC_CPU(cs); @@ -437,6 +470,7 @@ int
kvm_arch_init_vcpu(CPUState *cs)
}
kvm_get_one_reg(cs, KVM_REG_PPC_DEBUG_INST, &debug_inst_opcode);
+ kvmppc_hw_debug_points_init(cenv);
return ret;
}
@@ -1345,24 +1379,212 @@ int kvm_arch_remove_sw_breakpoint(CPUState *cs,
struct kvm_sw_breakpoint *bp)
return 0;
}
+static int find_hw_breakpoint(target_ulong addr, int type) {
+ int n;
+
+ assert((nb_hw_breakpoint + nb_hw_watchpoint)
+ <= ARRAY_SIZE(hw_debug_points));
+
+ for (n = 0; n < nb_hw_breakpoint + nb_hw_watchpoint; n++) {
+ if (hw_debug_points[n].addr == addr && hw_debug_points[n].type ==
type) {
+ return n;
+ }
+ }
+
+ return -1;
+}
+
+static int find_hw_watchpoint(target_ulong addr, int *flag) {
+ int n;
+
+ n = find_hw_breakpoint(addr, GDB_WATCHPOINT_ACCESS);
+ if (n >= 0) {
+ *flag = BP_MEM_ACCESS;
+ return n;
+ }
+
+ n = find_hw_breakpoint(addr, GDB_WATCHPOINT_WRITE);
+ if (n >= 0) {
+ *flag = BP_MEM_WRITE;
+ return n;
+ }
+
+ n = find_hw_breakpoint(addr, GDB_WATCHPOINT_READ);
+ if (n >= 0) {
+ *flag = BP_MEM_READ;
+ return n;
+ }
+
+ return -1;
+}
+
+int kvm_arch_insert_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type) {
+ if ((nb_hw_breakpoint + nb_hw_watchpoint) >= ARRAY_SIZE(hw_debug_points))
+ return -ENOBUFS;
+
+ hw_debug_points[nb_hw_breakpoint + nb_hw_watchpoint].addr = addr;
+ hw_debug_points[nb_hw_breakpoint + nb_hw_watchpoint].type = type;
+
+ switch (type) {
+ case GDB_BREAKPOINT_HW:
+ if (nb_hw_breakpoint >= max_hw_breakpoint) {
+ return -ENOBUFS;
+ }
+
+ if (find_hw_breakpoint(addr, type) >= 0) {
+ return -EEXIST;
+ }
+
+ nb_hw_breakpoint++;
+ break;
+
+ case GDB_WATCHPOINT_WRITE:
+ case GDB_WATCHPOINT_READ:
+ case GDB_WATCHPOINT_ACCESS:
+ if (nb_hw_watchpoint >= max_hw_watchpoint) {
+ return -ENOBUFS;
+ }
+
+ if (find_hw_breakpoint(addr, type) >= 0) {
+ return -EEXIST;
+ }
+
+ nb_hw_watchpoint++;
+ break;
+
+ default:
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+int kvm_arch_remove_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type) {
+ int n;
+
+ n = find_hw_breakpoint(addr, type);
+ if (n < 0) {
+ return -ENOENT;
+ }
+
+ switch (type) {
+ case GDB_BREAKPOINT_HW:
+ nb_hw_breakpoint--;
+ break;
+
+ case GDB_WATCHPOINT_WRITE:
+ case GDB_WATCHPOINT_READ:
+ case GDB_WATCHPOINT_ACCESS:
+ nb_hw_watchpoint--;
+ break;
+
+ default:
+ return -ENOSYS;
+ }
+ hw_debug_points[n] = hw_debug_points[nb_hw_breakpoint +
+ nb_hw_watchpoint];
+
+ return 0;
+}
+
+void kvm_arch_remove_all_hw_breakpoints(void)
+{
+ nb_hw_breakpoint = nb_hw_watchpoint = 0; }
+
void kvm_arch_update_guest_debug(CPUState *cs, struct kvm_guest_debug *dbg)
{
+ int n;
+
/* Software Breakpoint updates */
if (kvm_sw_breakpoints_active(cs)) {
dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP;
}
+
+ assert((nb_hw_breakpoint + nb_hw_watchpoint)
+ <= ARRAY_SIZE(hw_debug_points));
+ assert((nb_hw_breakpoint + nb_hw_watchpoint) <=
+ ARRAY_SIZE(dbg->arch.bp));
+
+ if (nb_hw_breakpoint + nb_hw_watchpoint > 0) {
+ dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP;
+ memset(dbg->arch.bp, 0, sizeof(dbg->arch.bp));
+ for (n = 0; n < nb_hw_breakpoint + nb_hw_watchpoint; n++) {
+ switch (hw_debug_points[n].type) {
+ case GDB_BREAKPOINT_HW:
+ dbg->arch.bp[n].type = KVMPPC_DEBUG_BREAKPOINT;
+ break;
+ case GDB_WATCHPOINT_WRITE:
+ dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_WRITE;
+ break;
+ case GDB_WATCHPOINT_READ:
+ dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_READ;
+ break;
+ case GDB_WATCHPOINT_ACCESS:
+ dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_WRITE |
+ KVMPPC_DEBUG_WATCH_READ;
+ break;
+ default:
+ cpu_abort(cs, "Unsupported breakpoint type\n");
+ }
+ dbg->arch.bp[n].addr = hw_debug_points[n].addr;
+ }
+ }
+}
+
+static void kvm_e500_handle_debug(CPUState *cs, int handle) {
+ PowerPCCPU *cpu = POWERPC_CPU(cs);
+ CPUPPCState *env = &cpu->env;
+
+ env->spr[SPR_BOOKE_DBSR] = 0;
How would KVM ever know that DBSR is now 0?