[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 09/15] target-tricore: Add instructions of SRRS a
From: |
Bastian Koppelmann |
Subject: |
[Qemu-devel] [PATCH v2 09/15] target-tricore: Add instructions of SRRS and SLRO opcode format |
Date: |
Mon, 14 Jul 2014 18:41:05 +0100 |
Add instructions of SSRS and SLRO opcode format.
Add micro-op generator functions for offset loads.
Signed-off-by: Bastian Koppelmann <address@hidden>
---
v1 -> v2:
- Replace OP_MEM_INDIRECT with gen_offset_ld/st functions using TCGMemOp.
- Change load/store instructions to use TCGMemOp.
target-tricore/translate.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index 4206a8a..5773b59 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -98,6 +98,26 @@ void tricore_cpu_dump_state(CPUState *cs, FILE *f,
/*
* Functions to generate micro-ops
*/
+
+/* Functions for load/save to/from memory */
+static inline void gen_offset_ld(DisasContext *ctx, TCGv r1, TCGv r2,
+ int16_t con, TCGMemOp mop)
+{
+ TCGv temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, r2, con);
+ tcg_gen_qemu_ld_tl(r1, temp, ctx->mem_idx, mop);
+ tcg_temp_free(temp);
+}
+
+static inline void gen_offset_st(DisasContext *ctx, TCGv r1, TCGv r2,
+ int16_t con, TCGMemOp mop)
+{
+ TCGv temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, r2, con);
+ tcg_gen_qemu_st_tl(r1, temp, ctx->mem_idx, mop);
+ tcg_temp_free(temp);
+}
+
/* Functions for arithmetic instructions */
#define OP_COND(insn)\
@@ -372,6 +392,9 @@ static void decode_ssr_opc(DisasContext *ctx, int op1)
static void decode_16Bit_opc(CPUTRICOREState *env, DisasContext *ctx)
{
int op1;
+ int r1, r2;
+ int32_t const16;
+ TCGv temp;
op1 = MASK_OP_MAJOR(ctx->opcode);
@@ -428,6 +451,37 @@ static void decode_16Bit_opc(CPUTRICOREState *env,
DisasContext *ctx)
case OPC1_16_SSR_ST_W_POSTINC:
decode_ssr_opc(ctx, op1);
break;
+/* SRRS-format */
+ case OPC1_16_SRRS_ADDSC_A:
+ r2 = MASK_OP_SRRS_S2(ctx->opcode);
+ r1 = MASK_OP_SRRS_S1D(ctx->opcode);
+ const16 = MASK_OP_SRRS_N(ctx->opcode);
+ temp = tcg_temp_new();
+ tcg_gen_shli_tl(temp, cpu_gpr_d[15], const16);
+ tcg_gen_add_tl(cpu_gpr_a[r1], cpu_gpr_a[r2], temp);
+ tcg_temp_free(temp);
+ break;
+/* SLRO-format */
+ case OPC1_16_SLRO_LD_A:
+ r1 = MASK_OP_SLRO_D(ctx->opcode);
+ const16 = MASK_OP_SLRO_OFF4(ctx->opcode);
+ gen_offset_ld(ctx, cpu_gpr_a[r1], cpu_gpr_a[15], const16 * 4, MO_LESL);
+ break;
+ case OPC1_16_SLRO_LD_BU:
+ r1 = MASK_OP_SLRO_D(ctx->opcode);
+ const16 = MASK_OP_SLRO_OFF4(ctx->opcode);
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[15], const16, MO_UB);
+ break;
+ case OPC1_16_SLRO_LD_H:
+ r1 = MASK_OP_SLRO_D(ctx->opcode);
+ const16 = MASK_OP_SLRO_OFF4(ctx->opcode);
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[15], const16 * 2, MO_LESW);
+ break;
+ case OPC1_16_SLRO_LD_W:
+ r1 = MASK_OP_SLRO_D(ctx->opcode);
+ const16 = MASK_OP_SLRO_OFF4(ctx->opcode);
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[15], const16 * 4, MO_LESL);
+ break;
}
}
--
2.0.1
- Re: [Qemu-devel] [PATCH v2 06/15] target-tricore: Add instructions of SRC opcode format, (continued)
[Qemu-devel] [PATCH v2 04/15] target-tricore: Add initialization for translation and activate target, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 02/15] target-tricore: Add board for systemmode, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 05/15] target-tricore: Add masks and opcodes for decoding, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 13/15] target-tricore: Add instructions of SC opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 07/15] target-tricore: Add instructions of SRR opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 09/15] target-tricore: Add instructions of SRRS and SLRO opcode format,
Bastian Koppelmann <=
[Qemu-devel] [PATCH v2 11/15] target-tricore: Add instructions of SBC and SBRN opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 10/15] target-tricore: Add instructions of SB opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 14/15] target-tricore: Add instructions of SLR, SSRO and SRO opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 08/15] target-tricore: Add instructions of SSR opcode format, Bastian Koppelmann, 2014/07/14
[Qemu-devel] [PATCH v2 12/15] target-tricore: Add instructions of SBR opcode format, Bastian Koppelmann, 2014/07/14