qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2 2/2] scsi-bus: Convert DeviceClass init to realiz


From: Fam Zheng
Subject: [Qemu-devel] [PATCH v2 2/2] scsi-bus: Convert DeviceClass init to realize
Date: Wed, 6 Aug 2014 10:01:54 +0800

Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Also in lsi53c895a, report the error when initializing the if=scsi
devices, before dropping it, because in the callee, error_report is
changed to error_setg.

Signed-off-by: Fam Zheng <address@hidden>
---
 hw/scsi/lsi53c895a.c       |  2 ++
 hw/scsi/scsi-bus.c         | 64 ++++++++++++++++++-------------------
 hw/scsi/scsi-disk.c        | 78 ++++++++++++++++++++++++----------------------
 hw/scsi/scsi-generic.c     | 37 +++++++++++-----------
 include/hw/scsi/scsi.h     |  7 +++--
 tests/qemu-iotests/051.out |  4 +--
 6 files changed, 96 insertions(+), 96 deletions(-)

diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c
index 786d848..dbc98a0 100644
--- a/hw/scsi/lsi53c895a.c
+++ b/hw/scsi/lsi53c895a.c
@@ -19,6 +19,7 @@
 #include "hw/pci/pci.h"
 #include "hw/scsi/scsi.h"
 #include "sysemu/dma.h"
+#include "qemu/error-report.h"
 
 //#define DEBUG_LSI
 //#define DEBUG_LSI_REG
@@ -2121,6 +2122,7 @@ static int lsi_scsi_init(PCIDevice *dev)
     if (!d->hotplugged) {
         scsi_bus_legacy_handle_cmdline(&s->bus, &err);
         if (err != NULL) {
+            error_report("%s", error_get_pretty(err));
             error_free(err);
             return -1;
         }
diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c
index 4341754..85d1287 100644
--- a/hw/scsi/scsi-bus.c
+++ b/hw/scsi/scsi-bus.c
@@ -37,20 +37,19 @@ static const TypeInfo scsi_bus_info = {
 };
 static int next_scsi_bus;
 
-static int scsi_device_init(SCSIDevice *s)
+static void scsi_device_realize(SCSIDevice *s, Error **errp)
 {
     SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s);
-    if (sc->init) {
-        return sc->init(s);
+    if (sc->realize) {
+        sc->realize(s, errp);
     }
-    return 0;
 }
 
-static void scsi_device_destroy(SCSIDevice *s)
+static void scsi_device_unrealize(SCSIDevice *s, Error **errp)
 {
     SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s);
-    if (sc->destroy) {
-        sc->destroy(s);
+    if (sc->unrealize) {
+        sc->unrealize(s, errp);
     }
 }
 
@@ -130,24 +129,24 @@ static void scsi_dma_restart_cb(void *opaque, int 
running, RunState state)
     }
 }
 
-static int scsi_qdev_init(DeviceState *qdev)
+static void scsi_qdev_realize(DeviceState *qdev, Error **errp)
 {
     SCSIDevice *dev = SCSI_DEVICE(qdev);
     SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
     SCSIDevice *d;
-    int rc = -1;
+    Error *local_err = NULL;
 
     if (dev->channel > bus->info->max_channel) {
-        error_report("bad scsi channel id: %d", dev->channel);
-        goto err;
+        error_setg(errp, "bad scsi channel id: %d", dev->channel);
+        return;
     }
     if (dev->id != -1 && dev->id > bus->info->max_target) {
-        error_report("bad scsi device id: %d", dev->id);
-        goto err;
+        error_setg(errp, "bad scsi device id: %d", dev->id);
+        return;
     }
     if (dev->lun != -1 && dev->lun > bus->info->max_lun) {
-        error_report("bad scsi device lun: %d", dev->lun);
-        goto err;
+        error_setg(errp, "bad scsi device lun: %d", dev->lun);
+        return;
     }
 
     if (dev->id == -1) {
@@ -159,8 +158,8 @@ static int scsi_qdev_init(DeviceState *qdev)
             d = scsi_device_find(bus, dev->channel, ++id, dev->lun);
         } while (d && d->lun == dev->lun && id < bus->info->max_target);
         if (d && d->lun == dev->lun) {
-            error_report("no free target");
-            goto err;
+            error_setg(errp, "no free target");
+            return;
         }
         dev->id = id;
     } else if (dev->lun == -1) {
@@ -169,43 +168,40 @@ static int scsi_qdev_init(DeviceState *qdev)
             d = scsi_device_find(bus, dev->channel, dev->id, ++lun);
         } while (d && d->lun == lun && lun < bus->info->max_lun);
         if (d && d->lun == lun) {
-            error_report("no free lun");
-            goto err;
+            error_setg(errp, "no free lun");
+            return;
         }
         dev->lun = lun;
     } else {
         d = scsi_device_find(bus, dev->channel, dev->id, dev->lun);
         assert(d);
         if (d->lun == dev->lun && dev != d) {
-            error_report("lun already used by '%s'", d->qdev.id);
-            goto err;
+            error_setg(errp, "lun already used by '%s'", d->qdev.id);
+            return;
         }
     }
 
     QTAILQ_INIT(&dev->requests);
-    rc = scsi_device_init(dev);
-    if (rc == 0) {
+    scsi_device_realize(dev, &local_err);
+    if (local_err) {
         dev->vmsentry = qemu_add_vm_change_state_handler(scsi_dma_restart_cb,
                                                          dev);
+        error_propagate(errp, local_err);
     }
 
     if (bus->info->hotplug) {
         bus->info->hotplug(bus, dev);
     }
-
-err:
-    return rc;
 }
 
-static int scsi_qdev_exit(DeviceState *qdev)
+static void scsi_qdev_unrealize(DeviceState *qdev, Error **errp)
 {
     SCSIDevice *dev = SCSI_DEVICE(qdev);
 
     if (dev->vmsentry) {
         qemu_del_vm_change_state_handler(dev->vmsentry);
     }
-    scsi_device_destroy(dev);
-    return 0;
+    scsi_device_unrealize(dev, errp);
 }
 
 /* handle legacy '-drive if=scsi,...' cmd line args */
@@ -1964,11 +1960,11 @@ static void scsi_device_class_init(ObjectClass *klass, 
void *data)
 {
     DeviceClass *k = DEVICE_CLASS(klass);
     set_bit(DEVICE_CATEGORY_STORAGE, k->categories);
-    k->bus_type = TYPE_SCSI_BUS;
-    k->init     = scsi_qdev_init;
-    k->unplug   = scsi_qdev_unplug;
-    k->exit     = scsi_qdev_exit;
-    k->props    = scsi_props;
+    k->bus_type  = TYPE_SCSI_BUS;
+    k->realize   = scsi_qdev_realize;
+    k->unplug    = scsi_qdev_unplug;
+    k->unrealize = scsi_qdev_unrealize;
+    k->props     = scsi_props;
 }
 
 static const TypeInfo scsi_device_type_info = {
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 9010724..5e634b3 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -2151,7 +2151,7 @@ static void scsi_disk_reset(DeviceState *dev)
     s->tray_open = 0;
 }
 
-static void scsi_destroy(SCSIDevice *dev)
+static void scsi_unrealize(SCSIDevice *dev, Error **errp)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
 
@@ -2234,29 +2234,28 @@ static void 
scsi_disk_unit_attention_reported(SCSIDevice *dev)
     }
 }
 
-static int scsi_initfn(SCSIDevice *dev)
+static void scsi_realize(SCSIDevice *dev, Error **errp)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     Error *err = NULL;
 
     if (!s->qdev.conf.bs) {
-        error_report("drive property not set");
-        return -1;
+        error_setg(errp, "drive property not set");
+        return;
     }
 
     if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
         !bdrv_is_inserted(s->qdev.conf.bs)) {
-        error_report("Device needs media, but drive is empty");
-        return -1;
+        error_setg(errp, "Device needs media, but drive is empty");
+        return;
     }
 
     blkconf_serial(&s->qdev.conf, &s->serial);
     if (dev->type == TYPE_DISK) {
         blkconf_geometry(&dev->conf, NULL, 65535, 255, 255, &err);
         if (err) {
-            error_report("%s", error_get_pretty(err));
-            error_free(err);
-            return -1;
+            error_propagate(errp, err);
+            return;
         }
     }
 
@@ -2273,8 +2272,8 @@ static int scsi_initfn(SCSIDevice *dev)
     }
 
     if (bdrv_is_sg(s->qdev.conf.bs)) {
-        error_report("unwanted /dev/sg*");
-        return -1;
+        error_setg(errp, "unwanted /dev/sg*");
+        return;
     }
 
     if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
@@ -2287,10 +2286,9 @@ static int scsi_initfn(SCSIDevice *dev)
 
     bdrv_iostatus_enable(s->qdev.conf.bs);
     add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
-    return 0;
 }
 
-static int scsi_hd_initfn(SCSIDevice *dev)
+static void scsi_hd_realize(SCSIDevice *dev, Error **errp)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     s->qdev.blocksize = s->qdev.conf.logical_block_size;
@@ -2298,10 +2296,10 @@ static int scsi_hd_initfn(SCSIDevice *dev)
     if (!s->product) {
         s->product = g_strdup("QEMU HARDDISK");
     }
-    return scsi_initfn(&s->qdev);
+    scsi_realize(&s->qdev, errp);
 }
 
-static int scsi_cd_initfn(SCSIDevice *dev)
+static void scsi_cd_realize(SCSIDevice *dev, Error **errp)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     s->qdev.blocksize = 2048;
@@ -2310,22 +2308,26 @@ static int scsi_cd_initfn(SCSIDevice *dev)
     if (!s->product) {
         s->product = g_strdup("QEMU CD-ROM");
     }
-    return scsi_initfn(&s->qdev);
+    scsi_realize(&s->qdev, errp);
 }
 
-static int scsi_disk_initfn(SCSIDevice *dev)
+static void scsi_disk_realize(SCSIDevice *dev, Error **errp)
 {
     DriveInfo *dinfo;
+    Error *local_err = NULL;
 
     if (!dev->conf.bs) {
-        return scsi_initfn(dev);  /* ... and die there */
+        scsi_realize(dev, &local_err);
+        assert(local_err);
+        error_propagate(errp, local_err);
+        return;
     }
 
     dinfo = drive_get_by_blockdev(dev->conf.bs);
     if (dinfo->media_cd) {
-        return scsi_cd_initfn(dev);
+        scsi_cd_realize(dev, errp);
     } else {
-        return scsi_hd_initfn(dev);
+        scsi_hd_realize(dev, errp);
     }
 }
 
@@ -2457,35 +2459,35 @@ static int get_device_type(SCSIDiskState *s)
     return 0;
 }
 
-static int scsi_block_initfn(SCSIDevice *dev)
+static void scsi_block_realize(SCSIDevice *dev, Error **errp)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     int sg_version;
     int rc;
 
     if (!s->qdev.conf.bs) {
-        error_report("drive property not set");
-        return -1;
+        error_setg(errp, "drive property not set");
+        return;
     }
 
     /* check we are using a driver managing SG_IO (version 3 and after) */
     rc = bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version);
     if (rc < 0) {
-        error_report("cannot get SG_IO version number: %s.  "
+        error_setg(errp, "cannot get SG_IO version number: %s.  "
                      "Is this a SCSI device?",
                      strerror(-rc));
-        return -1;
+        return;
     }
     if (sg_version < 30000) {
-        error_report("scsi generic interface too old");
-        return -1;
+        error_setg(errp, "scsi generic interface too old");
+        return;
     }
 
     /* get device type from INQUIRY data */
     rc = get_device_type(s);
     if (rc < 0) {
-        error_report("INQUIRY failed");
-        return -1;
+        error_setg(errp, "INQUIRY failed");
+        return;
     }
 
     /* Make a guess for the block size, we'll fix it when the guest sends.
@@ -2503,7 +2505,7 @@ static int scsi_block_initfn(SCSIDevice *dev)
      */
     s->features |= (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS);
 
-    return scsi_initfn(&s->qdev);
+    scsi_realize(&s->qdev, errp);
 }
 
 static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
@@ -2599,8 +2601,8 @@ static void scsi_hd_class_initfn(ObjectClass *klass, void 
*data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 
-    sc->init         = scsi_hd_initfn;
-    sc->destroy      = scsi_destroy;
+    sc->realize      = scsi_hd_realize;
+    sc->unrealize    = scsi_unrealize;
     sc->alloc_req    = scsi_new_request;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
@@ -2630,8 +2632,8 @@ static void scsi_cd_class_initfn(ObjectClass *klass, void 
*data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 
-    sc->init         = scsi_cd_initfn;
-    sc->destroy      = scsi_destroy;
+    sc->realize      = scsi_cd_realize;
+    sc->unrealize    = scsi_unrealize;
     sc->alloc_req    = scsi_new_request;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
@@ -2660,8 +2662,8 @@ static void scsi_block_class_initfn(ObjectClass *klass, 
void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 
-    sc->init         = scsi_block_initfn;
-    sc->destroy      = scsi_destroy;
+    sc->realize      = scsi_block_realize;
+    sc->unrealize    = scsi_unrealize;
     sc->alloc_req    = scsi_block_new_request;
     dc->fw_name = "disk";
     dc->desc = "SCSI block device passthrough";
@@ -2697,8 +2699,8 @@ static void scsi_disk_class_initfn(ObjectClass *klass, 
void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 
-    sc->init         = scsi_disk_initfn;
-    sc->destroy      = scsi_destroy;
+    sc->realize      = scsi_disk_realize;
+    sc->unrealize    = scsi_unrealize;
     sc->alloc_req    = scsi_new_request;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index 3733d2c..c34a0bc 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -386,49 +386,49 @@ static void scsi_generic_reset(DeviceState *dev)
     scsi_device_purge_requests(s, SENSE_CODE(RESET));
 }
 
-static void scsi_destroy(SCSIDevice *s)
+static void scsi_unrealize(SCSIDevice *s, Error **errp)
 {
     scsi_device_purge_requests(s, SENSE_CODE(NO_SENSE));
     blockdev_mark_auto_del(s->conf.bs);
 }
 
-static int scsi_generic_initfn(SCSIDevice *s)
+static void scsi_generic_realize(SCSIDevice *s, Error **errp)
 {
     int rc;
     int sg_version;
     struct sg_scsi_id scsiid;
 
     if (!s->conf.bs) {
-        error_report("drive property not set");
-        return -1;
+        error_setg(errp, "drive property not set");
+        return;
     }
 
     if (bdrv_get_on_error(s->conf.bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
-        error_report("Device doesn't support drive option werror");
-        return -1;
+        error_setg(errp, "Device doesn't support drive option werror");
+        return;
     }
     if (bdrv_get_on_error(s->conf.bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
-        error_report("Device doesn't support drive option rerror");
-        return -1;
+        error_setg(errp, "Device doesn't support drive option rerror");
+        return;
     }
 
     /* check we are using a driver managing SG_IO (version 3 and after */
     rc = bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version);
     if (rc < 0) {
-        error_report("cannot get SG_IO version number: %s.  "
-                     "Is this a SCSI device?",
-                     strerror(-rc));
-        return -1;
+        error_setg(errp, "cannot get SG_IO version number: %s.  "
+                         "Is this a SCSI device?",
+                         strerror(-rc));
+        return;
     }
     if (sg_version < 30000) {
-        error_report("scsi generic interface too old");
-        return -1;
+        error_setg(errp, "scsi generic interface too old");
+        return;
     }
 
     /* get LUN of the /dev/sg? */
     if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
-        error_report("SG_GET_SCSI_ID ioctl failed");
-        return -1;
+        error_setg(errp, "SG_GET_SCSI_ID ioctl failed");
+        return;
     }
 
     /* define device state */
@@ -460,7 +460,6 @@ static int scsi_generic_initfn(SCSIDevice *s)
     }
 
     DPRINTF("block size %d\n", s->blocksize);
-    return 0;
 }
 
 const SCSIReqOps scsi_generic_req_ops = {
@@ -495,8 +494,8 @@ static void scsi_generic_class_initfn(ObjectClass *klass, 
void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
 
-    sc->init         = scsi_generic_initfn;
-    sc->destroy      = scsi_destroy;
+    sc->realize      = scsi_generic_realize;
+    sc->unrealize    = scsi_unrealize;
     sc->alloc_req    = scsi_new_request;
     dc->fw_name = "disk";
     dc->desc = "pass through generic scsi device (/dev/sg*)";
diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h
index 1adb549..d64ef24 100644
--- a/include/hw/scsi/scsi.h
+++ b/include/hw/scsi/scsi.h
@@ -72,10 +72,13 @@ struct SCSIRequest {
 #define SCSI_DEVICE_GET_CLASS(obj) \
      OBJECT_GET_CLASS(SCSIDeviceClass, (obj), TYPE_SCSI_DEVICE)
 
+typedef void (*SCSIDeviceRealize)(SCSIDevice *dev, Error **errp);
+typedef void (*SCSIDeviceUnrealize)(SCSIDevice *dev, Error **errp);
+
 typedef struct SCSIDeviceClass {
     DeviceClass parent_class;
-    int (*init)(SCSIDevice *dev);
-    void (*destroy)(SCSIDevice *s);
+    SCSIDeviceRealize realize;
+    SCSIDeviceUnrealize unrealize;
     SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
                               uint8_t *buf, void *hba_private);
     void (*unit_attention_reported)(SCSIDevice *s);
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index d7b0f50..f6d9dc1 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -122,7 +122,7 @@ QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could 
not be initialized
 
 Testing: -drive if=scsi
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
+(qemu) QEMU_PROG: Device needs media, but drive is empty
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device lsi53c895a failed
 
@@ -149,13 +149,11 @@ QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' 
could not be initialized
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive 
is empty
-QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be 
initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is 
empty
-QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be 
initialized
 
 
-- 
2.0.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]