qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH][RESEND] pci: Use bus master address space for deliv


From: Jan Kiszka
Subject: [Qemu-devel] [PATCH][RESEND] pci: Use bus master address space for delivering MSI/MSI-X, messages
Date: Wed, 13 Aug 2014 08:14:30 +0200
User-agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.8.1.12) Gecko/20080226 SUSE/2.0.0.12-1.1 Thunderbird/2.0.0.12 Mnenhy/0.7.5.666

The spec says (and real HW confirms this) that, if the bus master bit
is 0, the device will not generate any PCI accesses. MSI and MSI-X
messages fall among these, so we should use the corresponding address
space to deliver them. This will prevent delivery if bus master support
is disabled.

Signed-off-by: Jan Kiszka <address@hidden>
Reviewed-by: Paolo Bonzini <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>

---
 hw/pci/msi.c  | 2 +-
 hw/pci/msix.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/pci/msi.c b/hw/pci/msi.c
index a4a3040..52d2313 100644
--- a/hw/pci/msi.c
+++ b/hw/pci/msi.c
@@ -291,7 +291,7 @@ void msi_notify(PCIDevice *dev, unsigned int vector)
                    "notify vector 0x%x"
                    " address: 0x%"PRIx64" data: 0x%"PRIx32"\n",
                    vector, msg.address, msg.data);
-    stl_le_phys(&address_space_memory, msg.address, msg.data);
+    stl_le_phys(&dev->bus_master_as, msg.address, msg.data);
 }
 
 /* Normally called by pci_default_write_config(). */
diff --git a/hw/pci/msix.c b/hw/pci/msix.c
index 5c49bfc..20ae476 100644
--- a/hw/pci/msix.c
+++ b/hw/pci/msix.c
@@ -439,7 +439,7 @@ void msix_notify(PCIDevice *dev, unsigned vector)
 
     msg = msix_get_message(dev, vector);
 
-    stl_le_phys(&address_space_memory, msg.address, msg.data);
+    stl_le_phys(&dev->bus_master_as, msg.address, msg.data);
 }
 
 void msix_reset(PCIDevice *dev)
-- 
1.8.1.1.298.ge7eed54



reply via email to

[Prev in Thread] Current Thread [Next in Thread]