qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v1 3/5] Netduino_SYSCFG: Add the Netduino Plus 2


From: Alistair Francis
Subject: Re: [Qemu-devel] [PATCH v1 3/5] Netduino_SYSCFG: Add the Netduino Plus 2 SYSCFG
Date: Mon, 1 Sep 2014 21:49:03 +1000

On Sun, Aug 24, 2014 at 1:09 PM, Peter Crosthwaite
<address@hidden> wrote:
> On Sun, Aug 24, 2014 at 10:14 AM, Alistair Francis <address@hidden> wrote:
>> This patch adds the Netduino Plus 2 System Configuration
>> Controller. This is used to configure what memory is mapped
>> at address 0 (although that is not supported) as well
>> as configure how the EXTI interrupts work (also not
>> supported at the moment).
>>
>
> Curious, Is this core needed to run the examples your posted on cover
> letter or is it possible to just remove it? Do you need the dummy regs
> to avoid crashes? (that's worth mentioning in commit msg).

It's not required for basic examples, but more complex examples will
expect it to be there. It's also required for external interrupts

Thanks,

Alistair

>> Signed-off-by: Alistair Francis <address@hidden>
>> ---
>>  hw/misc/Makefile.objs     |   1 +
>>  hw/misc/netduino_syscfg.c | 201 
>> ++++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 202 insertions(+)
>>  create mode 100644 hw/misc/netduino_syscfg.c
>>
>> diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
>> index 979e532..794f510 100644
>> --- a/hw/misc/Makefile.objs
>> +++ b/hw/misc/Makefile.objs
>> @@ -39,5 +39,6 @@ obj-$(CONFIG_OMAP) += omap_sdrc.o
>>  obj-$(CONFIG_OMAP) += omap_tap.o
>>  obj-$(CONFIG_SLAVIO) += slavio_misc.o
>>  obj-$(CONFIG_ZYNQ) += zynq_slcr.o
>> +obj-$(CONFIG_NETDUINOP2) += netduino_syscfg.o
>>
>>  obj-$(CONFIG_PVPANIC) += pvpanic.o
>> diff --git a/hw/misc/netduino_syscfg.c b/hw/misc/netduino_syscfg.c
>> new file mode 100644
>> index 0000000..3db5295
>> --- /dev/null
>> +++ b/hw/misc/netduino_syscfg.c
>> @@ -0,0 +1,201 @@
>> +/*
>> + * Netduino Plus 2 SYSCFG
>> + *
>> + * Copyright (c) 2014 Alistair Francis <address@hidden>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a 
>> copy
>> + * of this software and associated documentation files (the "Software"), to 
>> deal
>> + * in the Software without restriction, including without limitation the 
>> rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included 
>> in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 
>> OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
>> OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
>> FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#include "hw/sysbus.h"
>> +#include "sysemu/char.h"
>> +#include "hw/hw.h"
>> +#include "net/net.h"
>> +
>> +/* #define DEBUG_NETSYSCFG */
>> +
>> +#ifdef DEBUG_NETSYSCFG
>> +#define DPRINTF(fmt, ...) \
>> +do { printf("netduino_syscfg: " fmt , ## __VA_ARGS__); } while (0)
>> +#else
>> +#define DPRINTF(fmt, ...) do {} while (0)
>> +#endif
>> +
>> +#define SYSCFG_MEMRMP  0x00
>> +#define SYSCFG_PMC     0x04
>> +#define SYSCFG_EXTICR1 0x08
>> +#define SYSCFG_EXTICR2 0x0C
>> +#define SYSCFG_EXTICR3 0x10
>> +#define SYSCFG_EXTICR4 0x14
>> +#define SYSCFG_CMPCR   0x20
>> +
>> +#define TYPE_NETDUINO_SYSCFG "netduino_syscfg"
>> +#define NETDUINO_SYSCFG(obj) \
>> +    OBJECT_CHECK(struct net_syscfg, (obj), TYPE_NETDUINO_SYSCFG)
>> +
>> +struct net_syscfg {
>> +    SysBusDevice parent_obj;
>> +
>> +    MemoryRegion mmio;
>> +
>> +    uint32_t syscfg_memrmp;
>> +    uint32_t syscfg_pmc;
>> +    uint32_t syscfg_exticr1;
>> +    uint32_t syscfg_exticr2;
>> +    uint32_t syscfg_exticr3;
>> +    uint32_t syscfg_exticr4;
>> +    uint32_t syscfg_cmpcr;
>> +
>> +    qemu_irq irq;
>> +};
>> +
>> +static void syscfg_reset(DeviceState *dev)
>> +{
>> +    struct net_syscfg *s = NETDUINO_SYSCFG(dev);
>> +
>> +    s->syscfg_memrmp = 0x00000000;
>> +    s->syscfg_pmc = 0x00000000;
>> +    s->syscfg_exticr1 = 0x00000000;
>> +    s->syscfg_exticr2 = 0x00000000;
>> +    s->syscfg_exticr3 = 0x00000000;
>> +    s->syscfg_exticr4 = 0x00000000;
>> +    s->syscfg_cmpcr = 0x00000000;
>> +}
>> +
>> +static uint64_t netduino_syscfg_read(void *opaque, hwaddr addr,
>> +                                     unsigned int size)
>> +{
>> +    struct net_syscfg *s = opaque;
>> +
>> +    if (addr >= 0x400) {
>> +        addr = addr >> 7;
>> +    }
>
> What's this do? I think it's worthy of a comment :).
>
>> +
>> +    DPRINTF("Read 0x%x\n", (uint) addr);
>> +
>> +    switch (addr) {
>> +    case SYSCFG_MEMRMP:
>> +        return s->syscfg_memrmp;
>> +    case SYSCFG_PMC:
>> +        return s->syscfg_pmc;
>> +    case SYSCFG_EXTICR1:
>> +        return s->syscfg_exticr1;
>> +    case SYSCFG_EXTICR2:
>> +        return s->syscfg_exticr2;
>> +    case SYSCFG_EXTICR3:
>> +        return s->syscfg_exticr3;
>> +    case SYSCFG_EXTICR4:
>> +        return s->syscfg_exticr4;
>> +    case SYSCFG_CMPCR:
>> +        return s->syscfg_cmpcr;
>> +    default:
>> +        qemu_log_mask(LOG_GUEST_ERROR,
>> +                      "net_syscfg_read: Bad offset %x\n", (int)addr);
>> +        return 0;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static void netduino_syscfg_write(void *opaque, hwaddr addr,
>> +                       uint64_t val64, unsigned int size)
>> +{
>> +    struct net_syscfg *s = opaque;
>> +    uint32_t value = (uint32_t) val64;
>> +
>> +    if (addr >= 0x400) {
>> +        addr = addr >> 7;
>> +    }
>> +
>> +    DPRINTF("Write 0x%x, 0x%x\n", value, (uint) addr);
>> +
>> +    switch (addr) {
>> +    case SYSCFG_MEMRMP:
>> +        /* This isn't supported, so don't allow the guest to write to it
>> +         * s->syscfg_memrmp = value;
>> +         */
>
> qemu_log_mask(LOG_UNIMP
>
> Regards,
> Peter
>
>> +        return;
>> +    case SYSCFG_PMC:
>> +        /* This isn't supported, so don't allow the guest to write to it
>> +         * s->syscfg_pmc = value;
>> +         */
>> +        return;
>> +    case SYSCFG_EXTICR1:
>> +        s->syscfg_exticr1 = (value & 0xFF);
>> +        return;
>> +    case SYSCFG_EXTICR2:
>> +        s->syscfg_exticr2 = (value & 0xFF);
>> +        return;
>> +    case SYSCFG_EXTICR3:
>> +        s->syscfg_exticr3 = (value & 0xFF);
>> +        return;
>> +    case SYSCFG_EXTICR4:
>> +        s->syscfg_exticr4 = (value & 0xFF);
>> +        return;
>> +    case SYSCFG_CMPCR:
>> +        s->syscfg_cmpcr = value;
>> +        return;
>> +    default:
>> +        qemu_log_mask(LOG_GUEST_ERROR,
>> +                      "net_syscfg_write: Bad offset %x\n", (int)addr);
>> +    }
>> +}
>> +
>> +static const MemoryRegionOps netduino_syscfg_ops = {
>> +    .read = netduino_syscfg_read,
>> +    .write = netduino_syscfg_write,
>> +    .endianness = DEVICE_NATIVE_ENDIAN,
>> +};
>> +
>> +static int netduino_syscfg_init(SysBusDevice *sbd)
>> +{
>> +    DeviceState *dev = DEVICE(sbd);
>> +    struct net_syscfg *s = NETDUINO_SYSCFG(dev);
>> +
>> +    sysbus_init_irq(sbd, &s->irq);
>> +
>> +    memory_region_init_io(&s->mmio, OBJECT(s), &netduino_syscfg_ops, s,
>> +                          TYPE_NETDUINO_SYSCFG, 0x2000);
>> +    sysbus_init_mmio(sbd, &s->mmio);
>> +
>> +    return 0;
>> +}
>> +
>> +static void netduino_syscfg_class_init(ObjectClass *klass, void *data)
>> +{
>> +    DeviceClass *dc = DEVICE_CLASS(klass);
>> +    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
>> +
>> +    k->init = netduino_syscfg_init;
>> +    dc->props = NULL;
>> +    dc->reset = syscfg_reset;
>> +}
>> +
>> +static const TypeInfo netduino_syscfg_info = {
>> +    .name          = TYPE_NETDUINO_SYSCFG,
>> +    .parent        = TYPE_SYS_BUS_DEVICE,
>> +    .instance_size = sizeof(struct net_syscfg),
>> +    .class_init    = netduino_syscfg_class_init,
>> +};
>> +
>> +static void netduino_syscfg_register_types(void)
>> +{
>> +    type_register_static(&netduino_syscfg_info);
>> +}
>> +
>> +type_init(netduino_syscfg_register_types)
>> --
>> 1.9.1
>>
>>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]