[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Patch v1 5/8] target_arm: Parameterise the irq lines f
From: |
Alistair Francis |
Subject: |
Re: [Qemu-devel] [Patch v1 5/8] target_arm: Parameterise the irq lines for armv7m_init |
Date: |
Tue, 16 Sep 2014 12:43:05 +1000 |
On Tue, Sep 16, 2014 at 1:23 AM, Peter Crosthwaite
<address@hidden> wrote:
> On Sun, Sep 14, 2014 at 6:18 PM, Alistair Francis <address@hidden> wrote:
>> This patch allows the board to specifiy the number of NVIC interrupt
>> lines when using armv7m_init.
>>
>> Signed-off-by: Alistair Francis <address@hidden>
>> ---
>> hw/arm/armv7m.c | 7 ++++---
>> hw/arm/stellaris.c | 4 +++-
>> include/hw/arm/arm.h | 2 +-
>> 3 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
>> index 5c1f7b3..5e684a0 100644
>> --- a/hw/arm/armv7m.c
>> +++ b/hw/arm/armv7m.c
>> @@ -167,14 +167,14 @@ static void armv7m_reset(void *opaque)
>> Returns the NVIC array. */
>>
>> qemu_irq *armv7m_init(MemoryRegion *system_memory,
>> - int flash_size, int sram_size,
>> + int flash_size, int sram_size, int num_irq,
>
> This will change slightly based on previous patch comment, but otherwise.
>
> Reviewed-by: Peter Crosthwaite <address@hidden>
Thanks, but they are both still required as I explained in the other reply
>
>> const char *kernel_filename, const char *cpu_model)
>> {
>> ARMCPU *cpu;
>> CPUARMState *env;
>> DeviceState *nvic;
>> /* FIXME: make this local state. */
>> - static qemu_irq pic[64];
>> + qemu_irq *pic = g_new(qemu_irq, num_irq);
>> int image_size;
>> uint64_t entry;
>> uint64_t lowaddr;
>> @@ -207,11 +207,12 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
>> armv7m_bitband_init();
>>
>> nvic = qdev_create(NULL, "armv7m_nvic");
>> + qdev_prop_set_uint32(nvic, "num-irq", num_irq);
>
> Curious, was this previously relying on the default for nvic being 64?
> (hence this is appearing as purely additive).
Yep, it just used the default value
Thanks,
Alistair
>
> Regards,
> Peter
>
>> env->nvic = nvic;
>> qdev_init_nofail(nvic);
>> sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0,
>> qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
>> - for (i = 0; i < 64; i++) {
>> + for (i = 0; i < num_irq; i++) {
>> pic[i] = qdev_get_gpio_in(nvic, i);
>> }
>>
>> diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
>> index 3c8e9d1..e4da1fb 100644
>> --- a/hw/arm/stellaris.c
>> +++ b/hw/arm/stellaris.c
>> @@ -29,6 +29,8 @@
>> #define BP_OLED_SSI 0x02
>> #define BP_GAMEPAD 0x04
>>
>> +#define NUM_IRQ_LINES 64
>> +
>> typedef const struct {
>> const char *name;
>> uint32_t did0;
>> @@ -1238,7 +1240,7 @@ static void stellaris_init(const char
>> *kernel_filename, const char *cpu_model,
>> memory_region_add_subregion(system_memory, 0x20000000, sram);
>>
>> pic = armv7m_init(system_memory, flash_size, sram_size,
>> - kernel_filename, cpu_model);
>> + NUM_IRQ_LINES, kernel_filename, cpu_model);
>>
>> if (board->dc1 & (1 << 16)) {
>> dev = sysbus_create_varargs(TYPE_STELLARIS_ADC, 0x40038000,
>> diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h
>> index cefc9e6..3e7c463 100644
>> --- a/include/hw/arm/arm.h
>> +++ b/include/hw/arm/arm.h
>> @@ -16,7 +16,7 @@
>>
>> /* armv7m.c */
>> qemu_irq *armv7m_init(MemoryRegion *system_memory,
>> - int flash_size, int sram_size,
>> + int flash_size, int sram_size, int num_irq,
>> const char *kernel_filename, const char *cpu_model);
>>
>> /* arm_boot.c */
>> --
>> 1.9.1
>>
>>
- Re: [Qemu-devel] [Patch v1 1/8] stm32f205_timer: Add the stm32f205 Timer, (continued)
- [Qemu-devel] [Patch v1 2/8] stm32f205_USART: Add the stm32f205 USART Controller, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 3/8] stm32f205_SYSCFG: Add the stm32f205 SYSCFG, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 4/8] target_arm: Remove memory region init from armv7m_init, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 5/8] target_arm: Parameterise the irq lines for armv7m_init, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 6/8] target_arm: Change the reset values based on the ELF entry, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 7/8] stm32f205: Add the stm32f205 SoC, Alistair Francis, 2014/09/14
- [Qemu-devel] [Patch v1 8/8] netduino2: Add the Netduino 2 Machine, Alistair Francis, 2014/09/14