qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 03/15] qtest/ahci: Add port_clear helper


From: John Snow
Subject: [Qemu-devel] [PATCH 03/15] qtest/ahci: Add port_clear helper
Date: Thu, 18 Sep 2014 19:43:27 -0400

Add a helper that assists in clearing out potentially
old error and FIS information from an AHCI port's
data structures. This ensures we always start with
a blank slate for interrupt and FIS receipt information.

Signed-off-by: John Snow <address@hidden>
---
 tests/ahci-test.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 5739063..77e3963 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1262,6 +1262,22 @@ static unsigned port_select(AHCIState *ahci)
 }
 
 /**
+ * Clear a port's interrupts and status information prior to a test.
+ */
+static void port_clear(AHCIState *ahci, uint8_t px)
+{
+    uint32_t reg;
+
+    /* Clear out this port's interrupts (ignore the init register d2h fis) */
+    reg = PX_RREG(px, AHCI_PX_IS);
+    PX_WREG(px, AHCI_PX_IS, reg);
+    g_assert_cmphex(PX_RREG(px, AHCI_PX_IS), ==, 0);
+
+    /* Wipe the FIS-Recieve Buffer */
+    qmemset(ahci->port[px].fb, 0x00, 0x100);
+}
+
+/**
  * Utilizing an initialized AHCI HBA, issue an IDENTIFY command to the first
  * device we see, then read and check the response.
  */
@@ -1297,14 +1313,8 @@ static void ahci_test_identify(AHCIState *ahci)
     i = port_select(ahci);
     g_test_message("Selected port %u for test", i);
 
-    /* Clear out this port's interrupts (ignore the init register d2h fis) */
-    reg = PX_RREG(i, AHCI_PX_IS);
-    PX_WREG(i, AHCI_PX_IS, reg);
-    g_assert_cmphex(PX_RREG(i, AHCI_PX_IS), ==, 0);
-
-    /* Wipe the FIS-Recieve Buffer */
-    g_assert_cmphex(ahci->port[i].fb, !=, 0);
-    qmemset(ahci->port[i].fb, 0x00, 0x100);
+    /* Clear out the FIS Receive area and any pending interrupts. */
+    port_clear(ahci, i);
 
     /* Create a Command Table buffer. 0x80 is the smallest with a PRDTL of 0. 
*/
     /* We need at least one PRD, so round up to the nearest 0x80 multiple.    
*/
-- 
1.9.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]