[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1191326] Re: QNX 4 doesn't boot on qemu >= 1.3
From: |
Ray Senez |
Subject: |
[Qemu-devel] [Bug 1191326] Re: QNX 4 doesn't boot on qemu >= 1.3 |
Date: |
Mon, 22 Sep 2014 16:38:24 -0000 |
I am also experiencing this problem QNX 4.25 images that were created
under 1.0 no longer work when I've upgraded to 2.0 or 2.1 qemu.
The error message that I receive is the same. The problem is with the
virtual disk driver, it performs the initial boat loader, then when the
OS goes to load the file system it fails.
** Description changed:
-
I am using virtual machine with QNX4 operating system installed on it. I
updated my qemu from version
- to newer and QNX4 doesn't start any more. All is ok on version 1.2 but when I
try to use any newer version
+ to newer and QNX4 doesn't start any more. All is ok on version 1.2 but when I
try to use any newer version
(1.3, 1.4, 1.5) QNX4 doesn't boot. I tried on windows and linux ubuntu
hosts - effects are the same.
When virtual machine boots qnx bootloader loads and starts operating system.
In the next step
qnx starts its ide driver, which detects qemu harddisk and cdrom. Problem
starts when operating system
tries mount partition - an error occur and qnx stop booting procedure:
mount -p "No bios signature in partition sector on /dev/hd0"
I have tried install qnx from cdrom but it seems that there is the same
problem. QNX installer boot from
cdrom, detects hard disk and cdrom, but cdrom can't be mounted in the next
step of installation procedure.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1191326
Title:
QNX 4 doesn't boot on qemu >= 1.3
Status in QEMU:
New
Bug description:
I am using virtual machine with QNX4 operating system installed on it. I
updated my qemu from version
to newer and QNX4 doesn't start any more. All is ok on version 1.2 but when I
try to use any newer version
(1.3, 1.4, 1.5) QNX4 doesn't boot. I tried on windows and linux ubuntu
hosts - effects are the same.
When virtual machine boots qnx bootloader loads and starts operating system.
In the next step
qnx starts its ide driver, which detects qemu harddisk and cdrom. Problem
starts when operating system
tries mount partition - an error occur and qnx stop booting procedure:
mount -p "No bios signature in partition sector on /dev/hd0"
I have tried install qnx from cdrom but it seems that there is the same
problem. QNX installer boot from
cdrom, detects hard disk and cdrom, but cdrom can't be mounted in the next
step of installation procedure.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1191326/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 1191326] Re: QNX 4 doesn't boot on qemu >= 1.3,
Ray Senez <=