[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] pc: piix4_pm: init legacy PCI hotplug when runn
From: |
Stefano Stabellini |
Subject: |
Re: [Qemu-devel] [PATCH] pc: piix4_pm: init legacy PCI hotplug when running on Xen |
Date: |
Tue, 4 Nov 2014 10:36:50 +0000 |
User-agent: |
Alpine 2.02 (DEB 1266 2009-07-14) |
Feng, thanks for the email.
I was assuming that one of the other maintainers would take care of the
patch, but I am happy to submit a pull request for it too.
Paolo, Michael?
On Tue, 4 Nov 2014, Wu, Feng wrote:
> I still see this error in the latest QEMU. I find that this patch is not
> merged in. Anybody knows why?
>
> Thanks,
> Feng
>
> > -----Original Message-----
> > From: address@hidden
> > [mailto:address@hidden On Behalf Of
> > Igor Mammedov
> > Sent: Friday, May 23, 2014 8:04 PM
> > To: address@hidden
> > Cc: address@hidden; Chen, Tiejun; address@hidden;
> > address@hidden; address@hidden
> > Subject: [Qemu-devel] [PATCH] pc: piix4_pm: init legacy PCI hotplug when
> > running on Xen
> >
> > if user starts QEMU with "-machine pc,accel=xen", then
> > compat property in xenfv won't work and it would
> > cause error:
> > "Unsupported bus. Bus doesn't have property 'acpi-pcihp-bsel' set"
> > when PCI device is added with -device on QEMU CLI.
> >
> > In case of Xen instead of using compat property,
> > just use the fact that xen doesn't use QEMU's
> > fw_cfg/acpi tables to switch piix4_pm into legacy
> > PCI hotplug mode when Xen is enabled.
> >
> > Signed-off-by: Igor Mammedov <address@hidden>
> > ---
> > hw/acpi/piix4.c | 3 +++
> > hw/i386/pc_piix.c | 11 -----------
> > 2 files changed, 3 insertions(+), 11 deletions(-)
> >
> > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> > index 227ea30..12542c3 100644
> > --- a/hw/acpi/piix4.c
> > +++ b/hw/acpi/piix4.c
> > @@ -501,6 +501,9 @@ I2CBus *piix4_pm_init(PCIBus *bus, int devfn,
> > uint32_t smb_io_base,
> > s->irq = sci_irq;
> > s->smi_irq = smi_irq;
> > s->kvm_enabled = kvm_enabled;
> > + if (!fw_cfg) {
> > + s->use_acpi_pci_hotplug = false;
> > + }
> >
> > qdev_init_nofail(dev);
> >
> > diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
> > index a13e8d6..067ff0c 100644
> > --- a/hw/i386/pc_piix.c
> > +++ b/hw/i386/pc_piix.c
> > @@ -840,17 +840,6 @@ static QEMUMachine xenfv_machine = {
> > .max_cpus = HVM_MAX_VCPUS,
> > .default_machine_opts = "accel=xen",
> > .hot_add_cpu = pc_hot_add_cpu,
> > - .compat_props = (GlobalProperty[]) {
> > - /* xenfv has no fwcfg and so does not load acpi from QEMU.
> > - * as such new acpi features don't work.
> > - */
> > - {
> > - .driver = "PIIX4_PM",
> > - .property = "acpi-pci-hotplug-with-bridge-support",
> > - .value = "off",
> > - },
> > - { /* end of list */ }
> > - },
> > };
> > #endif
> >
> > --
> > 1.9.0
> >
>