[Qemu-devel] [PULL 17/33] PPC: E500: Instantiate MPC8XXX gpio controller on virt machine

[Alexander Graf]

With the e500 virt machine, we don't have to adhere to the exact hardware
layout of an mpc8544ds board. So there we can just add a qoriq compatible
GPIO controller into the system that we can add a power off hook to.

Signed-off-by: Alexander Graf <address@hidden>
---
 hw/ppc/e500.c     | 32 ++++++++++++++++++++++++++++++++
 hw/ppc/e500.h     |  1 +
 hw/ppc/e500plat.c |  1 +
 3 files changed, 34 insertions(+)

diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 2157d87..304c124 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -61,6 +61,8 @@
 #define MPC8544_PCI_IO             0xE1000000ULL
 #define MPC8544_UTIL_OFFSET        0xe0000ULL
 #define MPC8544_SPIN_BASE          0xEF000000ULL
+#define MPC8XXX_GPIO_OFFSET        0x000FF000ULL
+#define MPC8XXX_GPIO_IRQ           43
 
 struct boot_info
 {
@@ -122,6 +124,23 @@ static void dt_serial_create(void *fdt, unsigned long long 
offset,
     }
 }
 
+static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char 
*mpic)
+{
+    hwaddr mmio0 = MPC8XXX_GPIO_OFFSET;
+    int irq0 = MPC8XXX_GPIO_IRQ;
+    gchar *node = g_strdup_printf("%s/address@hidden"PRIx64, soc, mmio0);
+
+    qemu_fdt_add_subnode(fdt, node);
+    qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio");
+    qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000);
+    qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2);
+    qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic);
+    qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2);
+    qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0);
+
+    g_free(node);
+}
+
 static int ppce500_load_device_tree(MachineState *machine,
                                     PPCE500Params *params,
                                     hwaddr addr,
@@ -379,6 +398,10 @@ static int ppce500_load_device_tree(MachineState *machine,
     qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3);
     qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci);
 
+    if (params->has_mpc8xxx_gpio) {
+        create_dt_mpc8xxx_gpio(fdt, soc, mpic);
+    }
+
     params->fixup_devtree(params, fdt);
 
     if (toplevel_compat) {
@@ -769,6 +792,15 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
         cur_base = (32 * 1024 * 1024);
     }
 
+    if (params->has_mpc8xxx_gpio) {
+        dev = qdev_create(NULL, "mpc8xxx_gpio");
+        s = SYS_BUS_DEVICE(dev);
+        qdev_init_nofail(dev);
+        sysbus_connect_irq(s, 0, mpic[MPC8XXX_GPIO_IRQ]);
+        memory_region_add_subregion(ccsr_addr_space, MPC8XXX_GPIO_OFFSET,
+                                    sysbus_mmio_get_region(s, 0));
+    }
+
     /* Load kernel. */
     if (machine->kernel_filename) {
         kernel_base = cur_base;
diff --git a/hw/ppc/e500.h b/hw/ppc/e500.h
index 08b25fa..83c5b8b 100644
--- a/hw/ppc/e500.h
+++ b/hw/ppc/e500.h
@@ -11,6 +11,7 @@ typedef struct PPCE500Params {
     void (*fixup_devtree)(struct PPCE500Params *params, void *fdt);
 
     int mpic_version;
+    bool has_mpc8xxx_gpio;
 } PPCE500Params;
 
 void ppce500_init(MachineState *machine, PPCE500Params *params);
diff --git a/hw/ppc/e500plat.c b/hw/ppc/e500plat.c
index 27df31d..bafb56d 100644
--- a/hw/ppc/e500plat.c
+++ b/hw/ppc/e500plat.c
@@ -35,6 +35,7 @@ static void e500plat_init(MachineState *machine)
         .pci_nr_slots = PCI_SLOT_MAX - 1,
         .fixup_devtree = e500plat_fixup_devtree,
         .mpic_version = OPENPIC_MODEL_FSL_MPIC_42,
+        .has_mpc8xxx_gpio = true,
     };
 
     /* Older KVM versions don't support EPR which breaks guests when we 
announce
-- 
1.8.1.4