Re: [Qemu-devel] [PATCH] mips: Add M14K and M14Kc MIPS32r2 microMIPS processors

[Leon Alrae]

On 04/11/2014 15:39, Maciej W. Rozycki wrote:
> Add the M14K and M14Kc processors from MIPS Technologies that are the 
> original implementation of the microMIPS ISA.  They are dual instruction 
> set processors, implementing both the microMIPS and the standard MIPSr32 
> ISA.
> 
> These processors correspond to the M4K and 4KEc CPUs respectively, 
> except with support for the microMIPS instruction set added, support for 
> the MCU ASE added and two extra interrupt lines, making a total of 8 
> hardware interrupts plus 2 software interrupts.  The remaining parts of 
> the microarchitecture, in particular the pipeline, stayed unchanged.
> 
> The presence of the microMIPS ASE is is reflected in the configuration 
> added.  We currently have no support for the MCU ASE, including in 
> particular the ACLR, ASET and IRET instructions in either encoding, and 
> we have no support for the extra interrupt lines, including bits in 
> CP0.Status and CP0.Cause registers, so these features are not marked, 
> making our support diverge from real hardware.
> 
> Signed-off-by: Sandra Loosemore <address@hidden>
> Signed-off-by: Maciej W. Rozycki <address@hidden>
> ---
>  Hopefully we'll get the missing features sometime sooner rather than 
> later, they should not be difficult to add.  Meanwhile having actual 
> microMIPS CPUs to select is I think a worthwhile addition.  Please 
> apply.
> 
>   Maciej
> 
> qemu-mips-m14k.diff
> Index: qemu-git-trunk/target-mips/translate_init.c
> ===================================================================
> --- qemu-git-trunk.orig/target-mips/translate_init.c  2014-11-03 
> 19:09:06.000000000 +0000
> +++ qemu-git-trunk/target-mips/translate_init.c       2014-11-04 
> 00:33:42.268947442 +0000
> @@ -344,6 +344,47 @@ static const mips_def_t mips_defs[] =
>          .mmu_type = MMU_TYPE_R4000,
>      },
>      {
> +        .name = "M14K",
> +        .CP0_PRid = 0x00019b00,
> +        /* Config1 implemented, fixed mapping MMU,
> +           no virtual icache, uncached coherency. */
> +        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_KU) | (0x2 << CP0C0_K23) 
> |
> +                       (0x1 << CP0C0_AR) | (MMU_TYPE_FMT << CP0C0_MT),
> +        .CP0_Config1 = MIPS_CONFIG1,
> +        .CP0_Config2 = MIPS_CONFIG2,
> +        .CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (1 << CP0C3_VInt),
> +        .CP0_LLAddr_rw_bitmask = 0,
> +        .CP0_LLAddr_shift = 4,
> +        .SYNCI_Step = 32,
> +        .CCRes = 2,
> +        .CP0_Status_rw_bitmask = 0x1258FF17,
> +        .SEGBITS = 32,
> +        .PABITS = 32,
> +        .insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
> +        .mmu_type = MMU_TYPE_FMT,
> +    },
> +    {
> +        .name = "M14Kc",
> +        /* This is the TLB-based MMU core.  */
> +        .CP0_PRid = 0x00019c00,
> +        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
> +                       (MMU_TYPE_R4000 << CP0C0_MT),
> +        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
> +                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
> +                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA),
> +        .CP0_Config2 = MIPS_CONFIG2,
> +        .CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (0 << CP0C3_VInt),
> +        .CP0_LLAddr_rw_bitmask = 0,
> +        .CP0_LLAddr_shift = 4,
> +        .SYNCI_Step = 32,
> +        .CCRes = 2,
> +        .CP0_Status_rw_bitmask = 0x1278FF17,
> +        .SEGBITS = 32,
> +        .PABITS = 32,
> +        .insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
> +        .mmu_type = MMU_TYPE_R4000,
> +    },
> +    {
>          /* A generic CPU providing MIPS32 Release 5 features.
>             FIXME: Eventually this should be replaced by a real CPU model. */
>          .name = "mips32r5-generic",
> 

The actual microMIPS CPU definition is indeed a worthwile addition -
thanks. It was on my TODO list to upstream such a CPU but I haven't got
round to it.

Reviewed-by: Leon Alrae <address@hidden>

Regards,
Leon