qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 2/9] qemu-iotests: Use qemu-io -f $IMGFMT


From: Kevin Wolf
Subject: [Qemu-devel] [PATCH v3 2/9] qemu-iotests: Use qemu-io -f $IMGFMT
Date: Thu, 20 Nov 2014 16:27:07 +0100

This patch changes $QEMU_IO so that all tests by default pass a format
argument to qemu-io.

There are a few cases where -f $IMGFMT is not wanted because it selects
the wrong driver or json: filenames including a driver are used. They
are changed to use $QEMU_IO_PROG, which doesn't include any options.

Tests 071 and 081 have output changes because now the actual request
fails instead of reading the 2k probing buffer.

Signed-off-by: Kevin Wolf <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
---
 tests/qemu-iotests/016     | 11 +++++++----
 tests/qemu-iotests/048     |  2 +-
 tests/qemu-iotests/058     | 11 +++++++----
 tests/qemu-iotests/071     | 10 +++++-----
 tests/qemu-iotests/071.out |  6 +++---
 tests/qemu-iotests/077     |  2 +-
 tests/qemu-iotests/081     |  8 ++++++--
 tests/qemu-iotests/081.out |  2 +-
 tests/qemu-iotests/089     |  6 ++++--
 tests/qemu-iotests/common  |  2 +-
 10 files changed, 36 insertions(+), 24 deletions(-)

diff --git a/tests/qemu-iotests/016 b/tests/qemu-iotests/016
index 7ea9e94..52397aa 100755
--- a/tests/qemu-iotests/016
+++ b/tests/qemu-iotests/016
@@ -43,25 +43,28 @@ _supported_proto file sheepdog nfs
 _supported_os Linux
 
 
+# No -f, use probing for the protocol driver
+QEMU_IO_PROTO="$QEMU_IO_PROG -g --cache $CACHEMODE"
+
 size=128M
 _make_test_img $size
 
 echo
 echo "== reading at EOF =="
-$QEMU_IO -g -c "read -P 0 $size 512" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO_PROTO -c "read -P 0 $size 512" "$TEST_IMG" | _filter_qemu_io
 
 echo
 echo "== reading far past EOF =="
-$QEMU_IO -g -c "read -P 0 256M 512" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO_PROTO -c "read -P 0 256M 512" "$TEST_IMG" | _filter_qemu_io
 
 echo
 echo "== writing at EOF =="
-$QEMU_IO -g -c "write -P 66 $size 512" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO_PROTO -c "write -P 66 $size 512" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "read -P 66 $size 512" "$TEST_IMG" | _filter_qemu_io
 
 echo
 echo "== writing far past EOF =="
-$QEMU_IO -g -c "write -P 66 256M 512" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO_PROTO -c "write -P 66 256M 512" "$TEST_IMG" | _filter_qemu_io
 $QEMU_IO -c "read -P 66 256M 512" "$TEST_IMG" | _filter_qemu_io
 
 # success, all done
diff --git a/tests/qemu-iotests/048 b/tests/qemu-iotests/048
index 65da46d..e1eeac2 100755
--- a/tests/qemu-iotests/048
+++ b/tests/qemu-iotests/048
@@ -64,7 +64,7 @@ _compare
 _compare -q
 
 # Compare images with different size
-$QEMU_IMG resize "$TEST_IMG" +512M
+$QEMU_IMG resize -f $IMGFMT "$TEST_IMG" +512M
 _compare
 _compare -s
 
diff --git a/tests/qemu-iotests/058 b/tests/qemu-iotests/058
index 14584cd..2d5ca85 100755
--- a/tests/qemu-iotests/058
+++ b/tests/qemu-iotests/058
@@ -89,6 +89,9 @@ _supported_fmt qcow2
 _supported_proto file
 _require_command QEMU_NBD
 
+# Use -f raw instead of -f $IMGFMT for the NBD connection
+QEMU_IO_NBD="$QEMU_IO -f raw --cache=$CACHEMODE"
+
 echo
 echo "== preparing image =="
 _make_test_img 64M
@@ -108,15 +111,15 @@ _export_nbd_snapshot sn1
 
 echo
 echo "== verifying the exported snapshot with patterns, method 1 =="
-$QEMU_IO -c 'read -P 0xa 0x1000 0x1000' "$nbd_snapshot_img" | _filter_qemu_io
-$QEMU_IO -c 'read -P 0xb 0x2000 0x1000' "$nbd_snapshot_img" | _filter_qemu_io
+$QEMU_IO_NBD -c 'read -P 0xa 0x1000 0x1000' "$nbd_snapshot_img" | 
_filter_qemu_io
+$QEMU_IO_NBD -c 'read -P 0xb 0x2000 0x1000' "$nbd_snapshot_img" | 
_filter_qemu_io
 
 _export_nbd_snapshot1 sn1
 
 echo
 echo "== verifying the exported snapshot with patterns, method 2 =="
-$QEMU_IO -c 'read -P 0xa 0x1000 0x1000' "$nbd_snapshot_img" | _filter_qemu_io
-$QEMU_IO -c 'read -P 0xb 0x2000 0x1000' "$nbd_snapshot_img" | _filter_qemu_io
+$QEMU_IO_NBD -c 'read -P 0xa 0x1000 0x1000' "$nbd_snapshot_img" | 
_filter_qemu_io
+$QEMU_IO_NBD -c 'read -P 0xb 0x2000 0x1000' "$nbd_snapshot_img" | 
_filter_qemu_io
 
 $QEMU_IMG convert "$TEST_IMG" -l sn1 -O qcow2 "$converted_image"
 
diff --git a/tests/qemu-iotests/071 b/tests/qemu-iotests/071
index 3924e51..5d61ef6 100755
--- a/tests/qemu-iotests/071
+++ b/tests/qemu-iotests/071
@@ -63,12 +63,12 @@ echo
 TEST_IMG="$TEST_IMG.base" IMGOPTS="" IMGFMT="raw" _make_test_img $IMG_SIZE |\
     _filter_imgfmt
 _make_test_img $IMG_SIZE
-$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base 
$TEST_IMG" \
+$QEMU_IO -c "open -o 
driver=raw,file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
          -c 'read 0 512' -c 'write -P 42 0x38000 512' -c 'read -P 42 0x38000 
512' | _filter_qemu_io
 
 $QEMU_IO -c 'write -P 42 0 512' "$TEST_IMG" | _filter_qemu_io
 
-$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base 
$TEST_IMG" \
+$QEMU_IO -c "open -o 
driver=raw,file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
          -c 'read -P 42 0 512' | _filter_qemu_io
 
 echo
@@ -78,12 +78,12 @@ echo
 TEST_IMG="$TEST_IMG.base" IMGOPTS="" IMGFMT="raw" _make_test_img $IMG_SIZE |\
     _filter_imgfmt
 _make_test_img $IMG_SIZE
-$QEMU_IO -c "open -o 
file.driver=blkverify,file.raw.filename=$TEST_IMG.base,file.test.driver=$IMGFMT,file.test.file.filename=$TEST_IMG"
 \
+$QEMU_IO -c "open -o 
driver=raw,file.driver=blkverify,file.raw.filename=$TEST_IMG.base,file.test.driver=$IMGFMT,file.test.file.filename=$TEST_IMG"
 \
          -c 'read 0 512' -c 'write -P 42 0x38000 512' -c 'read -P 42 0x38000 
512' | _filter_qemu_io
 
 $QEMU_IO -c 'write -P 42 0 512' "$TEST_IMG" | _filter_qemu_io
 
-$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base 
$TEST_IMG" \
+$QEMU_IO -c "open -o 
driver=raw,file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
          -c 'read -P 42 0 512' | _filter_qemu_io
 
 echo
@@ -163,7 +163,7 @@ echo
 echo "=== Testing blkverify on existing raw block device ==="
 echo
 
-run_qemu -drive "file=$TEST_IMG.base,if=none,id=drive0" <<EOF
+run_qemu -drive "file=$TEST_IMG.base,format=raw,if=none,id=drive0" <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
diff --git a/tests/qemu-iotests/071.out b/tests/qemu-iotests/071.out
index 5f840a9..f36b898 100644
--- a/tests/qemu-iotests/071.out
+++ b/tests/qemu-iotests/071.out
@@ -12,7 +12,7 @@ read 512/512 bytes at offset 229376
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-blkverify: read sector_num=0 nb_sectors=4 contents mismatch in sector 0
+blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
 
 === Testing blkverify through file blockref ===
 
@@ -26,7 +26,7 @@ read 512/512 bytes at offset 229376
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 wrote 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-blkverify: read sector_num=0 nb_sectors=4 contents mismatch in sector 0
+blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
 
 === Testing blkdebug through filename ===
 
@@ -61,7 +61,7 @@ blkverify: read sector_num=0 nb_sectors=1 contents mismatch 
in sector 0
 
 === Testing blkverify on existing raw block device ===
 
-Testing: -drive file=TEST_DIR/t.IMGFMT.base,if=none,id=drive0
+Testing: -drive file=TEST_DIR/t.IMGFMT.base,format=raw,if=none,id=drive0
 QMP_VERSION
 {"return": {}}
 {"return": {}}
diff --git a/tests/qemu-iotests/077 b/tests/qemu-iotests/077
index 4dd1bdd..42a9085 100755
--- a/tests/qemu-iotests/077
+++ b/tests/qemu-iotests/077
@@ -52,7 +52,7 @@ echo "== Some concurrent requests involving RMW =="
 
 function test_io()
 {
-echo "open -o file.align=4k blkdebug::$TEST_IMG"
+echo "open -o driver=$IMGFMT,file.align=4k blkdebug::$TEST_IMG"
 # A simple RMW request
 cat  <<EOF
 aio_write -P 10 0x200 0x200
diff --git a/tests/qemu-iotests/081 b/tests/qemu-iotests/081
index ed3c29e..9ab93ff 100755
--- a/tests/qemu-iotests/081
+++ b/tests/qemu-iotests/081
@@ -59,9 +59,13 @@ function run_qemu()
 test_quorum=$($QEMU_IMG --help|grep quorum)
 [ "$test_quorum" = "" ] && _supported_fmt quorum
 
-quorum="file.driver=quorum,file.children.0.file.filename=$TEST_DIR/1.raw"
+quorum="driver=raw,file.driver=quorum,file.vote-threshold=2"
+quorum="$quorum,file.children.0.file.filename=$TEST_DIR/1.raw"
 quorum="$quorum,file.children.1.file.filename=$TEST_DIR/2.raw"
-quorum="$quorum,file.children.2.file.filename=$TEST_DIR/3.raw,file.vote-threshold=2"
+quorum="$quorum,file.children.2.file.filename=$TEST_DIR/3.raw"
+quorum="$quorum,file.children.0.driver=raw"
+quorum="$quorum,file.children.1.driver=raw"
+quorum="$quorum,file.children.2.driver=raw"
 
 echo
 echo "== creating quorum files =="
diff --git a/tests/qemu-iotests/081.out b/tests/qemu-iotests/081.out
index 073515e..190905a 100644
--- a/tests/qemu-iotests/081.out
+++ b/tests/qemu-iotests/081.out
@@ -55,5 +55,5 @@ wrote 10485760/10485760 bytes at offset 0
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == checking that quorum is broken ==
-qemu-io: can't open: Could not read image for determining its format: 
Input/output error
+read failed: Input/output error
 *** done
diff --git a/tests/qemu-iotests/089 b/tests/qemu-iotests/089
index dffc977..6f74cec 100755
--- a/tests/qemu-iotests/089
+++ b/tests/qemu-iotests/089
@@ -65,7 +65,8 @@ $QEMU_IO -c 'write -P 42 0 512' -c 'write -P 23 512 512' \
 
 $QEMU_IMG convert -f raw -O $IMGFMT "$TEST_IMG.base" "$TEST_IMG"
 
-$QEMU_IO -c 'read -P 42 0 512' -c 'read -P 23 512 512' \
+$QEMU_IO_PROG --cache $CACHEMODE \
+         -c 'read -P 42 0 512' -c 'read -P 23 512 512' \
          -c 'read -P 66 1024 512' "json:{
     \"driver\": \"$IMGFMT\",
     \"file\": {
@@ -91,7 +92,8 @@ $QEMU_IO -c 'write -P 42 0x38000 512' "$TEST_IMG" | 
_filter_qemu_io
 
 # The "image.filename" part tests whether "a": { "b": "c" } and "a.b": "c" do
 # the same (which they should).
-$QEMU_IO -c 'read -P 42 0x38000 512' "json:{
+$QEMU_IO_PROG --cache $CACHEMODE \
+     -c 'read -P 42 0x38000 512' "json:{
     \"driver\": \"$IMGFMT\",
     \"file\": {
         \"driver\": \"blkdebug\",
diff --git a/tests/qemu-iotests/common b/tests/qemu-iotests/common
index 9e12bec..b923cd2 100644
--- a/tests/qemu-iotests/common
+++ b/tests/qemu-iotests/common
@@ -391,7 +391,7 @@ BEGIN        { for (t='$start'; t<='$end'; t++) printf 
"%03d\n",t }' \
 done
 
 # Set qemu-io cache mode with $CACHEMODE we have
-QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --cache $CACHEMODE"
+QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS -f $IMGFMT --cache $CACHEMODE"
 
 # Set default options for qemu-img create -o if they were not specified
 _set_default_imgopts
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]