[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1404278] Re: tap connections not working on windows ho
From: |
timsoft |
Subject: |
[Qemu-devel] [Bug 1404278] Re: tap connections not working on windows host |
Date: |
Tue, 06 Jan 2015 21:12:53 -0000 |
output as requested from the guest:
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.1.1.143/24 brd 10.1.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link
valid_lft forever prefered_lft forever
ip route
default via 10.1.1.88 dev eth0 metric 1
10.1.1.0/24 dev eth0 proto kernel scope link src 10.1.1.143
127.0.0.0/8 dev lo scope link
iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
the output of ipconfig /all on the windows host is as follows
Windows IP Configuration
Host Name . . . . . . . . . . . . : timoffice
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter netbridge:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 02-FF-9A-6A-E7-7C
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::24f3:ff1d:12cb:5fbb%16(Preferred)
IPv4 Address. . . . . . . . . . . : 10.1.1.41(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.1.1.88
DHCPv6 IAID . . . . . . . . . . . : 469958554
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-E0-26-A3-BC-5F-F4-EE-19-98
DNS Servers . . . . . . . . . . . : 10.1.1.88
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{03958EF2-282D-45A7-9B98-0E447AA401A0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:3005:1b7:f5fe:fed6(Prefe
rred)
Link-local IPv6 Address . . . . . : fe80::3005:1b7:f5fe:fed6%13(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
and for reference, the vm is started with the following batch file/cmd
line
cd "c:\program files (x86)\qemu"
qemu-system-x86_64w.exe -m 512 -net nic -net tap,ifname=tap01 -hda
"c:\\data\\images\\test.img"
** Attachment added: "screenclip of host network connections"
https://bugs.launchpad.net/qemu/+bug/1404278/+attachment/4293202/+files/hostnetconfig.jpg
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1404278
Title:
tap connections not working on windows host
Status in QEMU:
New
Bug description:
using latest qemu 2.2.0 64bit for windows host (installed from
qemu-w64-setup-20141210.exe obtained from http://qemu.weilnetz.de/w64/
),OpenVPN 2.6.3-I601 64bit tap adapter named tap01 and calling qemu
using the following.
qemu-system-x86_64.exe -m 512 -net nic -net tap,ifname=tap01 -hda
"c:\\data\\images\\test.img"
where the image contains a slackware 14.0 64bit install.
The tap is bridged with the real network adapter and the bridge is given an
ip of 10.1.1.41 (which works as the ip for the windows host). The tap adapter
(in network connections) shows connected when the qemu vm is running. inside
the vm, the network is given an ip of 10.1.1.143 (the netmask and default
gateway are the same for the virtual and real pc).
fault.
The vm cannot see the rest of the local network or visa-versa. This used to
work in early (0.9 32bit) versions of qemu.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1404278/+subscriptions