qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v18 1/2] sPAPR: Implement EEH RTAS calls


From: Gavin Shan
Subject: [Qemu-devel] [PATCH v18 1/2] sPAPR: Implement EEH RTAS calls
Date: Mon, 16 Feb 2015 10:16:01 +1100

The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.

The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:

  * RTAS calls are received in spapr_pci.c, sanity check is done
    there.
  * RTAS handlers handle what they can. If there is something it
    cannot handle and the corresponding sPAPRPHBClass callback is
    defined, it is called.
  * Those callbacks are only implemented for VFIO now. They do ioctl()
    to the IOMMU container fd to complete the calls. Error codes from
    that ioctl() are transferred back to the guest.

[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: Gavin Shan <address@hidden>
---
 hw/ppc/spapr_pci.c          | 281 ++++++++++++++++++++++++++++++++++++++++++++
 include/hw/pci-host/spapr.h |   4 +
 include/hw/ppc/spapr.h      |  43 ++++++-
 3 files changed, 326 insertions(+), 2 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index cebdeb3..29b071d 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -406,6 +406,268 @@ static void 
rtas_ibm_query_interrupt_source_number(PowerPCCPU *cpu,
     rtas_st(rets, 2, 1);/* 0 == level; 1 == edge */
 }
 
+static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
+                                    sPAPREnvironment *spapr,
+                                    uint32_t token, uint32_t nargs,
+                                    target_ulong args, uint32_t nret,
+                                    target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint32_t addr, option;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 4) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    addr = rtas_ld(args, 0);
+    option = rtas_ld(args, 3);
+
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    /*
+     * The EEH functionality is enabled on basis of PCI device,
+     * instead of PE. We need check the validity of the PCI
+     * device address.
+     */
+    if (option == RTAS_EEH_ENABLE &&
+        !find_dev(spapr, buid, addr)) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_set_option(sphb, option);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
+                                           sPAPREnvironment *spapr,
+                                           uint32_t token, uint32_t nargs,
+                                           target_ulong args, uint32_t nret,
+                                           target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    PCIDevice *pdev;
+    uint32_t addr, option;
+    uint64_t buid;
+
+    if ((nargs != 4) || (nret != 2)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    /*
+     * We always have PE address of form "00BB0001". "BB"
+     * represents the bus number of PE's primary bus.
+     */
+    option = rtas_ld(args, 3);
+    switch (option) {
+    case RTAS_GET_PE_ADDR:
+        addr = rtas_ld(args, 0);
+        pdev = find_dev(spapr, buid, addr);
+        if (!pdev) {
+            goto param_error_exit;
+        }
+
+        rtas_st(rets, 1, (pci_bus_num(pdev->bus) << 16) + 1);
+        break;
+    case RTAS_GET_PE_MODE:
+        rtas_st(rets, 1, RTAS_PE_MODE_SHARED);
+        break;
+    default:
+        goto param_error_exit;
+    }
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
+                                            sPAPREnvironment *spapr,
+                                            uint32_t token, uint32_t nargs,
+                                            target_ulong args, uint32_t nret,
+                                            target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint64_t buid;
+    int state, ret;
+
+    if ((nargs != 3) || (nret != 4 && nret != 5)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_get_state) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_get_state(sphb, &state);
+    rtas_st(rets, 0, ret);
+    if (ret != RTAS_OUT_SUCCESS) {
+        return;
+    }
+
+    rtas_st(rets, 1, state);
+    rtas_st(rets, 2, RTAS_EEH_SUPPORT);
+    rtas_st(rets, 3, RTAS_EEH_PE_UNAVAIL_INFO);
+    if (nret >= 5) {
+        rtas_st(rets, 4, RTAS_EEH_PE_RECOVER_INFO);
+    }
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
+                                    sPAPREnvironment *spapr,
+                                    uint32_t token, uint32_t nargs,
+                                    target_ulong args, uint32_t nret,
+                                    target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint32_t option;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 4) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    option = rtas_ld(args, 3);
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_reset) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_reset(sphb, option);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
+                                  sPAPREnvironment *spapr,
+                                  uint32_t token, uint32_t nargs,
+                                  target_ulong args, uint32_t nret,
+                                  target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 3) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_configure) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_configure(sphb);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+/* To support it later */
+static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
+                                       sPAPREnvironment *spapr,
+                                       uint32_t token, uint32_t nargs,
+                                       target_ulong args, uint32_t nret,
+                                       target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    int option;
+    uint64_t buid;
+
+    if ((nargs != 8) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    option = rtas_ld(args, 7);
+    switch (option) {
+    case RTAS_SLOT_TEMP_ERR_LOG:
+    case RTAS_SLOT_PERM_ERR_LOG:
+        break;
+    default:
+        goto param_error_exit;
+    }
+
+    /* We don't have error log yet */
+    rtas_st(rets, 0, RTAS_OUT_NO_ERRORS_FOUND);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
 static int pci_spapr_swizzle(int slot, int pin)
 {
     return (slot + pin) % PCI_NUM_PINS;
@@ -974,6 +1236,25 @@ void spapr_pci_rtas_init(void)
         spapr_rtas_register(RTAS_IBM_CHANGE_MSI, "ibm,change-msi",
                             rtas_ibm_change_msi);
     }
+
+    spapr_rtas_register(RTAS_IBM_SET_EEH_OPTION,
+                        "ibm,set-eeh-option",
+                        rtas_ibm_set_eeh_option);
+    spapr_rtas_register(RTAS_IBM_GET_CONFIG_ADDR_INFO2,
+                        "ibm,get-config-addr-info2",
+                        rtas_ibm_get_config_addr_info2);
+    spapr_rtas_register(RTAS_IBM_READ_SLOT_RESET_STATE2,
+                        "ibm,read-slot-reset-state2",
+                        rtas_ibm_read_slot_reset_state2);
+    spapr_rtas_register(RTAS_IBM_SET_SLOT_RESET,
+                        "ibm,set-slot-reset",
+                        rtas_ibm_set_slot_reset);
+    spapr_rtas_register(RTAS_IBM_CONFIGURE_PE,
+                        "ibm,configure-pe",
+                        rtas_ibm_configure_pe);
+    spapr_rtas_register(RTAS_IBM_SLOT_ERROR_DETAIL,
+                        "ibm,slot-error-detail",
+                        rtas_ibm_slot_error_detail);
 }
 
 static void spapr_pci_register_types(void)
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index d725f0e..80af9fd 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -49,6 +49,10 @@ struct sPAPRPHBClass {
     PCIHostBridgeClass parent_class;
 
     void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
+    int (*eeh_set_option)(sPAPRPHBState *sphb, int option);
+    int (*eeh_get_state)(sPAPRPHBState *sphb, int *state);
+    int (*eeh_reset)(sPAPRPHBState *sphb, int option);
+    int (*eeh_configure)(sPAPRPHBState *sphb);
 };
 
 typedef struct spapr_pci_msi {
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index a8e6817..81c23e9 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -339,6 +339,39 @@ target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong 
opcode,
 int spapr_allocate_irq(int hint, bool lsi);
 int spapr_allocate_irq_block(int num, bool lsi, bool msi);
 
+/* ibm,set-eeh-option */
+#define RTAS_EEH_DISABLE                 0
+#define RTAS_EEH_ENABLE                  1
+#define RTAS_EEH_THAW_IO                 2
+#define RTAS_EEH_THAW_DMA                3
+
+/* ibm,get-config-addr-info2 */
+#define RTAS_GET_PE_ADDR                 0
+#define RTAS_GET_PE_MODE                 1
+#define RTAS_PE_MODE_NONE                0
+#define RTAS_PE_MODE_NOT_SHARED          1
+#define RTAS_PE_MODE_SHARED              2
+
+/* ibm,read-slot-reset-state2 */
+#define RTAS_EEH_PE_STATE_NORMAL         0
+#define RTAS_EEH_PE_STATE_RESET          1
+#define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
+#define RTAS_EEH_PE_STATE_STOPPED_DMA    4
+#define RTAS_EEH_PE_STATE_UNAVAIL        5
+#define RTAS_EEH_NOT_SUPPORT             0
+#define RTAS_EEH_SUPPORT                 1
+#define RTAS_EEH_PE_UNAVAIL_INFO         1000
+#define RTAS_EEH_PE_RECOVER_INFO         0
+
+/* ibm,set-slot-reset */
+#define RTAS_SLOT_RESET_DEACTIVATE       0
+#define RTAS_SLOT_RESET_HOT              1
+#define RTAS_SLOT_RESET_FUNDAMENTAL      3
+
+/* ibm,slot-error-detail */
+#define RTAS_SLOT_TEMP_ERR_LOG           1
+#define RTAS_SLOT_PERM_ERR_LOG           2
+
 /* RTAS return codes */
 #define RTAS_OUT_SUCCESS            0
 #define RTAS_OUT_NO_ERRORS_FOUND    1
@@ -383,8 +416,14 @@ int spapr_allocate_irq_block(int num, bool lsi, bool msi);
 #define RTAS_GET_SENSOR_STATE                   (RTAS_TOKEN_BASE + 0x1D)
 #define RTAS_IBM_CONFIGURE_CONNECTOR            (RTAS_TOKEN_BASE + 0x1E)
 #define RTAS_IBM_OS_TERM                        (RTAS_TOKEN_BASE + 0x1F)
-
-#define RTAS_TOKEN_MAX                          (RTAS_TOKEN_BASE + 0x20)
+#define RTAS_IBM_SET_EEH_OPTION                 (RTAS_TOKEN_BASE + 0x20)
+#define RTAS_IBM_GET_CONFIG_ADDR_INFO2          (RTAS_TOKEN_BASE + 0x21)
+#define RTAS_IBM_READ_SLOT_RESET_STATE2         (RTAS_TOKEN_BASE + 0x22)
+#define RTAS_IBM_SET_SLOT_RESET                 (RTAS_TOKEN_BASE + 0x23)
+#define RTAS_IBM_CONFIGURE_PE                   (RTAS_TOKEN_BASE + 0x24)
+#define RTAS_IBM_SLOT_ERROR_DETAIL              (RTAS_TOKEN_BASE + 0x25)
+
+#define RTAS_TOKEN_MAX                          (RTAS_TOKEN_BASE + 0x26)
 
 /* RTAS ibm,get-system-parameter token values */
 #define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS      20
-- 
1.8.3.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]