qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 38/96] virtio-net,tap: use standard-headers


From: Michael S. Tsirkin
Subject: [Qemu-devel] [PULL 38/96] virtio-net,tap: use standard-headers
Date: Wed, 18 Feb 2015 22:47:53 +0100

Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
---
 include/hw/virtio/virtio-net.h | 151 +----------------------------------------
 include/net/tap.h              |  24 +------
 2 files changed, 2 insertions(+), 173 deletions(-)

diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
index 6ceb5aa..4c2fe83 100644
--- a/include/hw/virtio/virtio-net.h
+++ b/include/hw/virtio/virtio-net.h
@@ -14,49 +14,15 @@
 #ifndef _QEMU_VIRTIO_NET_H
 #define _QEMU_VIRTIO_NET_H
 
+#include "standard-headers/linux/virtio_net.h"
 #include "hw/virtio/virtio.h"
-#include "hw/pci/pci.h"
 
 #define TYPE_VIRTIO_NET "virtio-net-device"
 #define VIRTIO_NET(obj) \
         OBJECT_CHECK(VirtIONet, (obj), TYPE_VIRTIO_NET)
 
-#define ETH_ALEN    6
-
-/* from Linux's virtio_net.h */
-
-/* The ID for virtio_net */
-#define VIRTIO_ID_NET   1
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum 
*/
 #define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Control channel offload
                                          * configuration support */
-#define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO        6       /* Host handles pkts w/ any GSO type */
-#define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. 
*/
-#define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available 
*/
-#define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20   /* Extra RX mode control support */
-#define VIRTIO_NET_F_GUEST_ANNOUNCE 21  /* Guest can announce itself */
-#define VIRTIO_NET_F_MQ         22      /* Device supports Receive Flow
-                                         * Steering */
-
-#define VIRTIO_NET_F_CTRL_MAC_ADDR   23 /* Set MAC address */
-
-#define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
-#define VIRTIO_NET_S_ANNOUNCE   2       /* Announcement is needed */
 
 #define TX_TIMER_INTERVAL 150000 /* 150 us */
 
@@ -77,72 +43,6 @@ typedef struct virtio_net_conf
 /* Maximum packet size we can receive from tap device: header + 64k */
 #define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
 
-struct virtio_net_config
-{
-    /* The config defining mac address ($ETH_ALEN bytes) */
-    uint8_t mac[ETH_ALEN];
-    /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
-    uint16_t status;
-    /* Max virtqueue pairs supported by the device */
-    uint16_t max_virtqueue_pairs;
-} QEMU_PACKED;
-
-/*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry.  Data for the
- * command goes in between.
- */
-struct virtio_net_ctrl_hdr {
-    uint8_t class;
-    uint8_t cmd;
-};
-
-typedef uint8_t virtio_net_ctrl_ack;
-
-#define VIRTIO_NET_OK     0
-#define VIRTIO_NET_ERR    1
-
-/*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
-#define VIRTIO_NET_CTRL_RX    0
- #define VIRTIO_NET_CTRL_RX_PROMISC      0
- #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
- #define VIRTIO_NET_CTRL_RX_ALLUNI       2
- #define VIRTIO_NET_CTRL_RX_NOMULTI      3
- #define VIRTIO_NET_CTRL_RX_NOUNI        4
- #define VIRTIO_NET_CTRL_RX_NOBCAST      5
-
-/*
- * Control the MAC
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite.  Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists.  Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- *
- * The ADDR_SET command requests one out scatterlist, it contains a
- * 6 bytes MAC address. This functionality is present if the
- * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
- */
-struct virtio_net_ctrl_mac {
-    uint32_t entries;
-    uint8_t macs[][ETH_ALEN];
-};
-
 typedef struct VirtIONetQueue {
     VirtQueue *rx_vq;
     VirtQueue *tx_vq;
@@ -199,55 +99,6 @@ typedef struct VirtIONet {
     int announce_counter;
 } VirtIONet;
 
-#define VIRTIO_NET_CTRL_MAC    1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
- #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
-
-/*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor.  Del is the
- * opposite of add.  Both commands expect an out entry containing a 2
- * byte VLAN ID.  VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
-#define VIRTIO_NET_CTRL_VLAN       2
- #define VIRTIO_NET_CTRL_VLAN_ADD             0
- #define VIRTIO_NET_CTRL_VLAN_DEL             1
-
-/*
- * Control link announce acknowledgement
- *
- * VIRTIO_NET_S_ANNOUNCE bit in the status field requests link announcement 
from
- * guest driver. The driver is notified by config space change interrupt.  The
- * command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that the driver has
- * received the notification. It makes the device clear the bit
- * VIRTIO_NET_S_ANNOUNCE in the status field.
- */
-#define VIRTIO_NET_CTRL_ANNOUNCE       3
- #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0
-
-/*
- * Control Multiqueue
- *
- * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
- * enables multiqueue, specifying the number of the transmit and
- * receive queues that will be used. After the command is consumed and acked by
- * the device, the device will not steer new packets on receive virtqueues
- * other than specified nor read from transmit virtqueues other than specified.
- * Accordingly, driver should not transmit new packets  on virtqueues other 
than
- * specified.
- */
-struct virtio_net_ctrl_mq {
-    uint16_t virtqueue_pairs;
-};
-
-#define VIRTIO_NET_CTRL_MQ   4
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
- #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
-
 /*
  * Control network offloads
  *
diff --git a/include/net/tap.h b/include/net/tap.h
index 6daeb42..5da4edc 100644
--- a/include/net/tap.h
+++ b/include/net/tap.h
@@ -28,6 +28,7 @@
 
 #include "qemu-common.h"
 #include "qapi-types.h"
+#include "standard-headers/linux/virtio_net.h"
 
 int tap_enable(NetClientState *nc);
 int tap_disable(NetClientState *nc);
@@ -37,27 +38,4 @@ int tap_get_fd(NetClientState *nc);
 struct vhost_net;
 struct vhost_net *tap_get_vhost_net(NetClientState *nc);
 
-struct virtio_net_hdr
-{
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID    2       // Csum is valid
-    uint8_t flags;
-#define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4        1       // GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP          3       // GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6        4       // GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN          0x80    // TCP has ECN set
-    uint8_t gso_type;
-    uint16_t hdr_len;
-    uint16_t gso_size;
-    uint16_t csum_start;
-    uint16_t csum_offset;
-};
-
-struct virtio_net_hdr_mrg_rxbuf
-{
-    struct virtio_net_hdr hdr;
-    uint16_t num_buffers;   /* Number of merged rx buffers */
-};
-
 #endif /* QEMU_NET_TAP_H */
-- 
MST




reply via email to

[Prev in Thread] Current Thread [Next in Thread]