qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/3] target-ppc: use separate indices for various tr


From: Paolo Bonzini
Subject: [Qemu-devel] [PATCH 3/3] target-ppc: use separate indices for various translation modes
Date: Fri, 20 Feb 2015 18:57:20 +0100

PowerPC TCG flushes the TLB on every IR/DR change, which basically
means on every user<->kernel context switch.  Encode IR/DR in the
MMU index.

This brings the number of TLB flushes down from ~900000 to ~50000
for starting up the Debian installer, which is in line with x86
and gives a ~10% performance improvement.

Signed-off-by: Paolo Bonzini <address@hidden>
---
 target-ppc/cpu.h         | 12 +++++++-----
 target-ppc/excp_helper.c |  3 ---
 target-ppc/helper_regs.h | 15 +++++++++------
 3 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index aae33a9..80755a4 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -943,7 +943,13 @@ struct ppc_segment_page_sizes {
 
 /*****************************************************************************/
 /* The whole PowerPC CPU context */
-#define NB_MMU_MODES 3
+#define NB_MMU_MODES 12
+#define MMU_IDX_IR   1
+#define MMU_IDX_DR   2
+#define MMU_IDX_PR   0
+#define MMU_IDX_SUP  4
+#define MMU_IDX_HV   8
+#define MMU_USER_IDX (MMU_IDX_PR|MMU_IDX_IR|MMU_IDX_DR)
 
 #define PPC_CPU_OPCODES_LEN          0x40
 #define PPC_CPU_INDIRECT_OPCODES_LEN 0x20
@@ -1252,10 +1258,6 @@ static inline CPUPPCState *cpu_init(const char 
*cpu_model)
 #define cpu_list ppc_cpu_list
 
 /* MMU modes definitions */
-#define MMU_MODE0_SUFFIX _user
-#define MMU_MODE1_SUFFIX _kernel
-#define MMU_MODE2_SUFFIX _hypv
-#define MMU_USER_IDX 0
 static inline int cpu_mmu_index (CPUPPCState *env)
 {
     return env->mmu_idx;
diff --git a/target-ppc/excp_helper.c b/target-ppc/excp_helper.c
index b803475..f608701 100644
--- a/target-ppc/excp_helper.c
+++ b/target-ppc/excp_helper.c
@@ -623,9 +623,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int 
excp_model, int excp)
 
     if (env->spr[SPR_LPCR] & LPCR_AIL) {
         new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
-    } else if (msr & ((1 << MSR_IR) | (1 << MSR_DR))) {
-        /* If we disactivated any translation, flush TLBs */
-        tlb_flush(cs, 1);
     }
 
 #ifdef TARGET_PPC64
diff --git a/target-ppc/helper_regs.h b/target-ppc/helper_regs.h
index 271fddf..97d28e0 100644
--- a/target-ppc/helper_regs.h
+++ b/target-ppc/helper_regs.h
@@ -41,12 +41,17 @@ static inline void hreg_swap_gpr_tgpr(CPUPPCState *env)
 
 static inline void hreg_compute_mem_idx(CPUPPCState *env)
 {
+    int mmu_idx;
+
     /* Precompute MMU index */
-    if (msr_pr == 0 && msr_hv != 0) {
-        env->mmu_idx = 2;
+    if (msr_pr == 1) {
+        mmu_idx = MMU_IDX_PR;
     } else {
-        env->mmu_idx = 1 - msr_pr;
+        mmu_idx = msr_hv ? MMU_IDX_HV : MMU_IDX_SUP;
     }
+    mmu_idx |= msr_ir ? MMU_IDX_IR : 0;
+    mmu_idx |= msr_dr ? MMU_IDX_DR : 0;
+    env->mmu_idx = mmu_idx;
 }
 
 static inline void hreg_compute_hflags(CPUPPCState *env)
@@ -56,7 +61,7 @@ static inline void hreg_compute_hflags(CPUPPCState *env)
     /* We 'forget' FE0 & FE1: we'll never generate imprecise exceptions */
     hflags_mask = (1 << MSR_VR) | (1 << MSR_AP) | (1 << MSR_SA) |
         (1 << MSR_PR) | (1 << MSR_FP) | (1 << MSR_SE) | (1 << MSR_BE) |
-        (1 << MSR_LE) | (1 << MSR_VSX);
+        (1 << MSR_LE) | (1 << MSR_VSX) | (1 << MSR_IR) | (1 << MSR_DR);
     hflags_mask |= (1ULL << MSR_CM) | (1ULL << MSR_SF) | MSR_HVB;
     hreg_compute_mem_idx(env);
     env->hflags = env->msr & hflags_mask;
@@ -82,8 +87,6 @@ static inline int hreg_store_msr(CPUPPCState *env, 
target_ulong value,
     }
     if (((value >> MSR_IR) & 1) != msr_ir ||
         ((value >> MSR_DR) & 1) != msr_dr) {
-        /* Flush all tlb when changing translation mode */
-        tlb_flush(cs, 1);
         excp = POWERPC_EXCP_NONE;
         cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
     }
-- 
2.3.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]