[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH
From: |
Alex Williamson |
Subject: |
Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset |
Date: |
Tue, 17 Mar 2015 15:09:52 -0600 |
On Tue, 2015-03-17 at 03:31 +1100, Gavin Shan wrote:
> The PCI device MSIx table is cleaned out in hardware after EEH PE
> reset. However, we still hold the stale MSIx entries in QEMU, which
> should be cleared accordingly. Otherwise, we will run into another
> (recursive) EEH error and the PCI devices contained in the PE have
> to be offlined exceptionally.
>
> The patch clears stale MSIx table before EEH PE reset so that MSIx
> table could be restored properly after EEH PE reset.
>
> Signed-off-by: Gavin Shan <address@hidden>
> ---
> v2: vfio_container_eeh_event() stub for !CONFIG_PCI and separate
> error message for this function. Dropped vfio_put_group()
> on NULL group
> ---
> hw/vfio/Makefile.objs | 6 +++++-
> hw/vfio/common.c | 7 +++++++
> hw/vfio/pci-stub.c | 17 +++++++++++++++++
> hw/vfio/pci.c | 38 ++++++++++++++++++++++++++++++++++++++
> include/hw/vfio/vfio.h | 2 ++
> 5 files changed, 69 insertions(+), 1 deletion(-)
> create mode 100644 hw/vfio/pci-stub.c
>
> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> index e31f30e..1b8a065 100644
> --- a/hw/vfio/Makefile.objs
> +++ b/hw/vfio/Makefile.objs
> @@ -1,4 +1,8 @@
> ifeq ($(CONFIG_LINUX), y)
> obj-$(CONFIG_SOFTMMU) += common.o
> -obj-$(CONFIG_PCI) += pci.o
> +ifeq ($(CONFIG_PCI), y)
> +obj-y += pci.o
> +else
> +obj-y += pci-stub.o
> +endif
> endif
> diff --git a/hw/vfio/common.c b/hw/vfio/common.c
> index 148eb53..ed07814 100644
> --- a/hw/vfio/common.c
> +++ b/hw/vfio/common.c
> @@ -949,7 +949,14 @@ int vfio_container_ioctl(AddressSpace *as, int32_t
> groupid,
> switch (req) {
> case VFIO_CHECK_EXTENSION:
> case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
> + break;
> case VFIO_EEH_PE_OP:
> + if (vfio_container_eeh_event(as, groupid, param) != 0) {
> + error_report("vfio: cannot handle EEH event on group %d\n",
> + groupid);
> + return -1;
> + }
> +
> break;
> default:
> /* Return an error on unknown requests */
> diff --git a/hw/vfio/pci-stub.c b/hw/vfio/pci-stub.c
> new file mode 100644
> index 0000000..7726a7a
> --- /dev/null
> +++ b/hw/vfio/pci-stub.c
> @@ -0,0 +1,17 @@
> +/*
> + * To include the file on !CONFIG_PCI
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2. See
> + * the COPYING file in the top-level directory.
> + */
> +
> +#include <linux/vfio.h>
> +
> +#include "exec/memory.h"
> +#include "hw/vfio/vfio.h"
> +
> +int vfio_container_eeh_event(AddressSpace *as, int32_t groupid,
> + struct vfio_eeh_pe_op *op)
> +{
> + return -1;
> +}
How about just a static inline in vfio.h?
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 6b80539..fca1edc 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -3319,6 +3319,44 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice
> *vdev)
> vdev->req_enabled = false;
> }
>
> +int vfio_container_eeh_event(AddressSpace *as, int32_t groupid,
> + struct vfio_eeh_pe_op *op)
> +{
> + VFIOGroup *group;
> + VFIODevice *vbasedev;
> + VFIOPCIDevice *vdev;
> +
> + group = vfio_get_group(groupid, as);
> + if (!group) {
> + error_report("vfio: group %d not found\n", groupid);
> + return -1;
> + }
> +
> + switch (op->op) {
> + case VFIO_EEH_PE_RESET_HOT:
> + case VFIO_EEH_PE_RESET_FUNDAMENTAL:
> + /*
> + * The MSIx table will be cleaned out by reset. We need
> + * disable it so that it can be reenabled properly. Also,
> + * the cached MSIx table should be cleared as it's not
> + * reflecting the contents in hardware.
> + */
> + QLIST_FOREACH(vbasedev, &group->device_list, next) {
> + vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> + if (msix_enabled(&vdev->pdev)) {
> + vfio_disable_msix(vdev);
> + }
> +
> + msix_reset(&vdev->pdev);
> + }
> +
> + break;
> + }
> +
> + vfio_put_group(group);
> + return 0;
> +}
> +
> static int vfio_initfn(PCIDevice *pdev)
> {
> VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> diff --git a/include/hw/vfio/vfio.h b/include/hw/vfio/vfio.h
> index 0b26cd8..e9a3abb 100644
> --- a/include/hw/vfio/vfio.h
> +++ b/include/hw/vfio/vfio.h
> @@ -5,5 +5,7 @@
>
> extern int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
> int req, void *param);
> +extern int vfio_container_eeh_event(AddressSpace *as, int32_t groupid,
> + struct vfio_eeh_pe_op *op);
>
> #endif
Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset,
Alex Williamson <=
Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/20
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/20
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/23
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/23
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Alex Williamson, 2015/03/24