[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v5 6/7] acpi: add hardware implementation for me
|
From: |
Igor Mammedov |
|
Subject: |
Re: [Qemu-devel] [PATCH v5 6/7] acpi: add hardware implementation for memory hot unplug |
|
Date: |
Mon, 30 Mar 2015 11:09:47 +0200 |
On Fri, 27 Mar 2015 17:20:39 +0800
Zhu Guihua <address@hidden> wrote:
> - implements QEMU hardware part of memory hot unplug protocol
> described at "docs/spec/acpi_mem_hotplug.txt"
> - handles memory remove notification event
> - handles device eject notification
>
> Signed-off-by: Zhu Guihua <address@hidden>
> ---
> docs/specs/acpi_mem_hotplug.txt | 16 +++++++++++++---
> hw/acpi/memory_hotplug.c | 20 +++++++++++++++++++-
> hw/core/qdev.c | 2 +-
> hw/i386/acpi-build.c | 12 ++++++++++++
> hw/i386/acpi-dsdt-mem-hotplug.dsl | 13 ++++++++++++-
> include/hw/acpi/pc-hotplug.h | 3 +++
> include/hw/qdev-core.h | 1 +
> trace-events | 2 ++
> 8 files changed, 63 insertions(+), 6 deletions(-)
>
> diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
> index a88b286..96f9abe 100644
> --- a/docs/specs/acpi_mem_hotplug.txt
> +++ b/docs/specs/acpi_mem_hotplug.txt
> @@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
> access):
> 1: Device insert event, used to distinguish device for which
> no device check event to OSPM was issued.
> It's valid only when bit 1 is set.
> - 2-7: reserved and should be ignored by OSPM
> + 2: Device remove event, used to distinguish device for which
> + no device check event to OSPM was issued.
According to ACPI spec it's not device check but "Eject request"
> + 3-7: reserved and should be ignored by OSPM
> [0x15-0x17] reserved
>
> write access:
> @@ -31,11 +33,19 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
> access):
> [0xc-0x13] reserved, writes into it are ignored
> [0x14] Memory device control fields
> bits:
> - 0: reserved, OSPM must clear it before writing to register
> + 0: reserved, OSPM must clear it before writing to register.
> + Due to BUG in versions prior 2.4 that field isn't
> + cleared when other fields are written.Keep it reserved
> + and don't try to reuse it.
> 1: if set to 1 clears device insert event, set by OSPM
> after it has emitted device check event for the
> selected memory device
> - 2-7: reserved, OSPM must clear them before writing to register
> + 2: if set to 1 clears device remove event, set by OSPM
> + after it has emitted device check event for the
> + selected memory device
same as above
> + 3: if set to 1 initiates device eject, set by OSPM when it
> + triggers memory device removal and calls _EJ0 method
> + 4-7: reserved, OSPM must clear them before writing to register
>
> Selecting memory device slot beyond present range has no effect on platform:
> - write accesses to memory hot-plug registers not documented above are
> diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
> index 07e281f..2a1b866 100644
> --- a/hw/acpi/memory_hotplug.c
> +++ b/hw/acpi/memory_hotplug.c
> @@ -2,6 +2,7 @@
> #include "hw/acpi/pc-hotplug.h"
> #include "hw/mem/pc-dimm.h"
> #include "hw/boards.h"
> +#include "hw/qdev-core.h"
> #include "trace.h"
> #include "qapi-event.h"
>
> @@ -91,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr
> addr, uint64_t data,
> MemHotplugState *mem_st = opaque;
> MemStatus *mdev;
> ACPIOSTInfo *info;
> + DeviceState *dev = NULL;
> + HotplugHandler *hotplug_ctrl = NULL;
>
> if (!mem_st->dev_count) {
> return;
> @@ -128,13 +131,28 @@ static void acpi_memory_hotplug_write(void *opaque,
> hwaddr addr, uint64_t data,
> qapi_event_send_acpi_device_ost(info, &error_abort);
> qapi_free_ACPIOSTInfo(info);
> break;
> - case 0x14:
> + case 0x14: /* set is_* fields */
> mdev = &mem_st->devs[mem_st->selector];
> if (data & 2) { /* clear insert event */
> mdev->is_inserting = false;
> trace_mhp_acpi_clear_insert_evt(mem_st->selector);
> + } else if (data & 4) {
> + mdev->is_removing = false;
> + trace_mhp_acpi_clear_remove_evt(mem_st->selector);
> + } else if (data & 8) {
> + if (!mdev->is_enabled) {
> + trace_mhp_acpi_ejecting_invalid_slot(mem_st->selector);
why isn't there any trace event for success path?
> + break;
> + }
> +
> + dev = DEVICE(mdev->dimm);
> + hotplug_ctrl = qdev_get_hotplug_handler(dev);
> + /* call pc-dimm unplug cb */
> + hotplug_handler_unplug(hotplug_ctrl, dev, NULL);
> }
> break;
> + default:
> + break;
> }
>
> }
> diff --git a/hw/core/qdev.c b/hw/core/qdev.c
> index 6e6a65d..b0f0f84 100644
> --- a/hw/core/qdev.c
> +++ b/hw/core/qdev.c
> @@ -273,7 +273,7 @@ void qdev_set_legacy_instance_id(DeviceState *dev, int
> alias_id,
> dev->alias_required_for_version = required_for_version;
> }
>
> -static HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
> +HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
> {
> HotplugHandler *hotplug_ctrl = NULL;
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index b767cbe..927250e 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -931,6 +931,12 @@ build_ssdt(GArray *table_data, GArray *linker,
> aml_append(field,
> /*(read) 1 if has a insert event. (write) 1 to clear event */
> aml_named_field(stringify(MEMORY_SLOT_INSERT_EVENT), 1));
> + aml_append(field,
> + /* (read) 1 if has a remove event. (write) 1 to clear event */
> + aml_named_field(stringify(MEMORY_SLOT_REMOVE_EVENT), 1));
> + aml_append(field,
> + /* initiates device eject, write only */
> + aml_named_field(stringify(MEMORY_SLOT_EJECT), 1));
> aml_append(scope, field);
>
> field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), aml_dword_acc,
> @@ -975,6 +981,12 @@ build_ssdt(GArray *table_data, GArray *linker,
> )));
> aml_append(dev, method);
>
> + method = aml_method("_EJ0", 1);
> + s = BASEPATH stringify(MEMORY_SLOT_EJECT_METHOD);
> + aml_append(method, aml_return(aml_call2(
> + s, aml_name("_UID"), aml_arg(0))));
> + aml_append(dev, method);
> +
> aml_append(sb_scope, dev);
> }
>
> diff --git a/hw/i386/acpi-dsdt-mem-hotplug.dsl
> b/hw/i386/acpi-dsdt-mem-hotplug.dsl
> index 1e9ec39..c2bb6a1 100644
> --- a/hw/i386/acpi-dsdt-mem-hotplug.dsl
> +++ b/hw/i386/acpi-dsdt-mem-hotplug.dsl
> @@ -29,6 +29,8 @@
> External(MEMORY_SLOT_PROXIMITY, FieldUnitObj) // read only
> External(MEMORY_SLOT_ENABLED, FieldUnitObj) // 1 if enabled,
> read only
> External(MEMORY_SLOT_INSERT_EVENT, FieldUnitObj) // (read) 1 if
> has a insert event. (write) 1 to clear event
> + External(MEMORY_SLOT_REMOVE_EVENT, FieldUnitObj) // (read) 1 if
> has a remove event. (write) 1 to clear event
> + External(MEMORY_SLOT_EJECT, FieldUnitObj) // initiates device
> eject, write only
> External(MEMORY_SLOT_SLECTOR, FieldUnitObj) // DIMM selector,
> write only
> External(MEMORY_SLOT_OST_EVENT, FieldUnitObj) // _OST event
> code, write only
> External(MEMORY_SLOT_OST_STATUS, FieldUnitObj) // _OST status
> code, write only
> @@ -55,8 +57,10 @@
> If (LEqual(MEMORY_SLOT_INSERT_EVENT, One)) { // Memory
> device needs check
> MEMORY_SLOT_NOTIFY_METHOD(Local0, 1)
> Store(1, MEMORY_SLOT_INSERT_EVENT)
> + } Elseif (LEqual(MEMORY_SLOT_REMOVE_EVENT, One)) { //
> Ejection request
> + MEMORY_SLOT_NOTIFY_METHOD(Local0, 3)
> + Store(1, MEMORY_SLOT_REMOVE_EVENT)
> }
> - // TODO: handle memory eject request
> Add(Local0, One, Local0) // goto next DIMM
> }
> Release(MEMORY_SLOT_LOCK)
> @@ -156,5 +160,12 @@
> Store(Arg2, MEMORY_SLOT_OST_STATUS)
> Release(MEMORY_SLOT_LOCK)
> }
> +
> + Method(MEMORY_SLOT_EJECT_METHOD, 2) {
> + Acquire(MEMORY_SLOT_LOCK, 0xFFFF)
> + Store(ToInteger(Arg0), MEMORY_SLOT_SLECTOR) // select DIMM
> + Store(1, MEMORY_SLOT_EJECT)
> + Release(MEMORY_SLOT_LOCK)
> + }
> } // Device()
> } // Scope()
> diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h
> index efa6ed7..0513c1c 100644
> --- a/include/hw/acpi/pc-hotplug.h
> +++ b/include/hw/acpi/pc-hotplug.h
> @@ -43,6 +43,8 @@
> #define MEMORY_SLOT_PROXIMITY MPX
> #define MEMORY_SLOT_ENABLED MES
> #define MEMORY_SLOT_INSERT_EVENT MINS
> +#define MEMORY_SLOT_REMOVE_EVENT MRMV
> +#define MEMORY_SLOT_EJECT MEJ
> #define MEMORY_SLOT_SLECTOR MSEL
> #define MEMORY_SLOT_OST_EVENT MOEV
> #define MEMORY_SLOT_OST_STATUS MOSC
> @@ -51,6 +53,7 @@
> #define MEMORY_SLOT_CRS_METHOD MCRS
> #define MEMORY_SLOT_OST_METHOD MOST
> #define MEMORY_SLOT_PROXIMITY_METHOD MPXM
> +#define MEMORY_SLOT_EJECT_METHOD MEJ0
> #define MEMORY_SLOT_NOTIFY_METHOD MTFY
> #define MEMORY_SLOT_SCAN_METHOD MSCN
>
> diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
> index 4e673f9..5b7acf1 100644
> --- a/include/hw/qdev-core.h
> +++ b/include/hw/qdev-core.h
> @@ -266,6 +266,7 @@ int qdev_init(DeviceState *dev) QEMU_WARN_UNUSED_RESULT;
> void qdev_init_nofail(DeviceState *dev);
> void qdev_set_legacy_instance_id(DeviceState *dev, int alias_id,
> int required_for_version);
> +HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev);
> void qdev_unplug(DeviceState *dev, Error **errp);
> void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev,
> DeviceState *dev, Error **errp);
> diff --git a/trace-events b/trace-events
> index 30eba92..fabdd78 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -1562,6 +1562,7 @@ vfio_put_base_device(int fd) "close vdev->fd=%d"
>
> #hw/acpi/memory_hotplug.c
> mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
> +mhp_acpi_ejecting_invalid_slot(uint32_t slot) "0x%"PRIx32
> mhp_acpi_read_addr_lo(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr
> lo: 0x%"PRIx32
> mhp_acpi_read_addr_hi(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr
> hi: 0x%"PRIx32
> mhp_acpi_read_size_lo(uint32_t slot, uint32_t size) "slot[0x%"PRIx32"] size
> lo: 0x%"PRIx32
> @@ -1572,6 +1573,7 @@ mhp_acpi_write_slot(uint32_t slot) "set active slot:
> 0x%"PRIx32
> mhp_acpi_write_ost_ev(uint32_t slot, uint32_t ev) "slot[0x%"PRIx32"] OST
> EVENT: 0x%"PRIx32
> mhp_acpi_write_ost_status(uint32_t slot, uint32_t st) "slot[0x%"PRIx32"] OST
> STATUS: 0x%"PRIx32
> mhp_acpi_clear_insert_evt(uint32_t slot) "slot[0x%"PRIx32"] clear insert
> event"
> +mhp_acpi_clear_remove_evt(uint32_t slot) "slot[0x%"PRIx32"] clear remove
> event"
>
> # hw/i386/pc.c
> mhp_pc_dimm_assigned_slot(int slot) "0x%d"
- [Qemu-devel] [PATCH v5 0/7] QEMU memory hot unplug support, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 1/7] docs: update documentation for memory hot unplug, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 2/7] acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 3/7] acpi, mem-hotplug: add unplug request cb for memory device, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 6/7] acpi: add hardware implementation for memory hot unplug, Zhu Guihua, 2015/03/27
- Re: [Qemu-devel] [PATCH v5 6/7] acpi: add hardware implementation for memory hot unplug,
Igor Mammedov <=
- [Qemu-devel] [PATCH v5 5/7] acpi: extend aml_field() to support UpdateRule, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 7/7] qmp-event: add event notification for memory hot unplug error, Zhu Guihua, 2015/03/27
- [Qemu-devel] [PATCH v5 4/7] acpi, mem-hotplug: add unplug cb for memory device, Zhu Guihua, 2015/03/27
- Re: [Qemu-devel] [PATCH v5 0/7] QEMU memory hot unplug support, Zhu Guihua, 2015/03/29