qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH V5 17/18] pci: remove hard-coded bar size in msi


From: Michael S. Tsirkin
Subject: Re: [Qemu-devel] [PATCH V5 17/18] pci: remove hard-coded bar size in msix_init_exclusive_bar()
Date: Wed, 1 Apr 2015 11:18:56 +0200

On Wed, Apr 01, 2015 at 04:15:11PM +0800, Jason Wang wrote:
> This patch lets msix_init_exclusive_bar() can calculate the bar and
> pba size according to the number of MSI-X vectors other than using a
> hard-coded limit 4096. This is needed to allow device to have more
> than 128 MSI_X vectors. An extra legacy_layout parameter was
> introduced to use legacy static 4096 bar size to keep the migration
> compatibility.
> 
> Virtio device will be the first user for this.
> 
> Cc: Keith Busch <address@hidden>
> Cc: Kevin Wolf <address@hidden>
> Cc: Stefan Hajnoczi <address@hidden>
> Cc: Michael S. Tsirkin <address@hidden>
> Signed-off-by: Jason Wang <address@hidden>
> ---
>  hw/block/nvme.c        |  2 +-
>  hw/misc/ivshmem.c      |  2 +-
>  hw/pci/msix.c          | 47 +++++++++++++++++++++++++++++------------------
>  hw/virtio/virtio-pci.c |  2 +-
>  include/hw/pci/msix.h  |  2 +-
>  5 files changed, 33 insertions(+), 22 deletions(-)
> 
> diff --git a/hw/block/nvme.c b/hw/block/nvme.c
> index 1e07166..9af6e1e 100644
> --- a/hw/block/nvme.c
> +++ b/hw/block/nvme.c
> @@ -787,7 +787,7 @@ static int nvme_init(PCIDevice *pci_dev)
>      pci_register_bar(&n->parent_obj, 0,
>          PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
>          &n->iomem);
> -    msix_init_exclusive_bar(&n->parent_obj, n->num_queues, 4);
> +    msix_init_exclusive_bar(&n->parent_obj, n->num_queues, 4, true);
>  
>      id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
>      id->ssvid = cpu_to_le16(pci_get_word(pci_conf + 
> PCI_SUBSYSTEM_VENDOR_ID));
> diff --git a/hw/misc/ivshmem.c b/hw/misc/ivshmem.c
> index 5d272c8..6ae48ae 100644
> --- a/hw/misc/ivshmem.c
> +++ b/hw/misc/ivshmem.c
> @@ -631,7 +631,7 @@ static uint64_t ivshmem_get_size(IVShmemState * s) {
>  
>  static void ivshmem_setup_msi(IVShmemState * s)
>  {
> -    if (msix_init_exclusive_bar(PCI_DEVICE(s), s->vectors, 1)) {
> +    if (msix_init_exclusive_bar(PCI_DEVICE(s), s->vectors, 1, true)) {
>          IVSHMEM_DPRINTF("msix initialization failed\n");
>          exit(1);
>      }
> diff --git a/hw/pci/msix.c b/hw/pci/msix.c
> index 24de260..8c6d8f3 100644
> --- a/hw/pci/msix.c
> +++ b/hw/pci/msix.c
> @@ -291,33 +291,44 @@ int msix_init(struct PCIDevice *dev, unsigned short 
> nentries,
>  }
>  
>  int msix_init_exclusive_bar(PCIDevice *dev, unsigned short nentries,
> -                            uint8_t bar_nr)
> +                            uint8_t bar_nr, bool legacy_layout)
>  {
>      int ret;
>      char *name;
> -
> -    /*
> -     * Migration compatibility dictates that this remains a 4k
> -     * BAR with the vector table in the lower half and PBA in
> -     * the upper half.  Do not use these elsewhere!
> -     */
> -#define MSIX_EXCLUSIVE_BAR_SIZE 4096
> -#define MSIX_EXCLUSIVE_BAR_TABLE_OFFSET 0
> -#define MSIX_EXCLUSIVE_BAR_PBA_OFFSET (MSIX_EXCLUSIVE_BAR_SIZE / 2)
> -#define MSIX_EXCLUSIVE_CAP_OFFSET 0
> -
> -    if (nentries * PCI_MSIX_ENTRY_SIZE > MSIX_EXCLUSIVE_BAR_PBA_OFFSET) {
> -        return -EINVAL;
> +    uint32_t bar_size;
> +    uint32_t bar_pba_offset;
> +
> +    if (legacy_layout) {
> +        /*
> +         * Migration compatibility dictates that this remains a 4k
> +         * BAR with the vector table in the lower half and PBA in
> +         * the upper half.  Do not use these elsewhere!
> +         */
> +        bar_size = 4096;
> +        bar_pba_offset = bar_size / 2;
> +
> +        if (nentries * PCI_MSIX_ENTRY_SIZE > bar_pba_offset) {
> +            return -EINVAL;
> +        }

So this takes pains to behave in a compatible
way when more than 128 vectors are requested.
But since we only had up to 64 VQs, why does
some a configuration make sense?

I suggest we just ignore this configuration
for migration compatibility.



> +    } else {
> +        bar_pba_offset = nentries * PCI_MSIX_ENTRY_SIZE;
> +        bar_size = bar_pba_offset + (nentries / 8 + 1) * 8;
> +        if (bar_size & (bar_size - 1)) {
> +            bar_size = 1 << qemu_fls(bar_size);
> +        }
> +        if (bar_size < 4096) {
> +            bar_size = 4096;
> +        }
>      }

Don't duplicate code like this please.
Just do this:
        /*
         * We always did it like this, so we have to keep doing this to
         * avoid breaking migration.
         */
        if (bar_pba_offset < 4096 / 2)
                bar_pba_offset =  4096 / 2;


Will save a ton of churn.


with 2 above suggestions you no longer
need to worry about machine compatibility.

>  
>      name = g_strdup_printf("%s-msix", dev->name);
> -    memory_region_init(&dev->msix_exclusive_bar, OBJECT(dev), name, 
> MSIX_EXCLUSIVE_BAR_SIZE);
> +    memory_region_init(&dev->msix_exclusive_bar, OBJECT(dev), name, 
> bar_size);
>      g_free(name);
>  
>      ret = msix_init(dev, nentries, &dev->msix_exclusive_bar, bar_nr,
> -                    MSIX_EXCLUSIVE_BAR_TABLE_OFFSET, 
> &dev->msix_exclusive_bar,
> -                    bar_nr, MSIX_EXCLUSIVE_BAR_PBA_OFFSET,
> -                    MSIX_EXCLUSIVE_CAP_OFFSET);
> +                    0, &dev->msix_exclusive_bar,
> +                    bar_nr, bar_pba_offset,
> +                    0);
>      if (ret) {
>          return ret;
>      }
> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> index 02e3ce8..816a706 100644
> --- a/hw/virtio/virtio-pci.c
> +++ b/hw/virtio/virtio-pci.c
> @@ -937,7 +937,7 @@ static void virtio_pci_device_plugged(DeviceState *d)
>      config[PCI_INTERRUPT_PIN] = 1;
>  
>      if (proxy->nvectors &&
> -        msix_init_exclusive_bar(&proxy->pci_dev, proxy->nvectors, 1)) {
> +        msix_init_exclusive_bar(&proxy->pci_dev, proxy->nvectors, 1, true)) {
>          error_report("unable to init msix vectors to %" PRIu32,
>                       proxy->nvectors);
>          proxy->nvectors = 0;
> diff --git a/include/hw/pci/msix.h b/include/hw/pci/msix.h
> index 954d82b..6c19535 100644
> --- a/include/hw/pci/msix.h
> +++ b/include/hw/pci/msix.h
> @@ -11,7 +11,7 @@ int msix_init(PCIDevice *dev, unsigned short nentries,
>                unsigned table_offset, MemoryRegion *pba_bar,
>                uint8_t pba_bar_nr, unsigned pba_offset, uint8_t cap_pos);
>  int msix_init_exclusive_bar(PCIDevice *dev, unsigned short nentries,
> -                            uint8_t bar_nr);
> +                            uint8_t bar_nr, bool legacy_layout);
>  
>  void msix_write_config(PCIDevice *dev, uint32_t address, uint32_t val, int 
> len);
>  
> -- 
> 2.1.0



reply via email to

[Prev in Thread] Current Thread [Next in Thread]