[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v6 38/47] Postcopy: Use helpers to map pages during
From: |
Dr. David Alan Gilbert (git) |
Subject: |
[Qemu-devel] [PATCH v6 38/47] Postcopy: Use helpers to map pages during migration |
Date: |
Tue, 14 Apr 2015 18:04:04 +0100 |
From: "Dr. David Alan Gilbert" <address@hidden>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_less_copy is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <address@hidden>
---
arch_init.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 97 insertions(+), 20 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index c96c4c1..0d3e865 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -1476,7 +1476,17 @@ static int load_xbzrle(QEMUFile *f, ram_addr_t addr,
void *host)
/* Must be called from within a rcu critical section.
* Returns a pointer from within the RCU-protected ram_list.
*/
+/*
+ * Read a RAMBlock ID from the stream f, find the host address of the
+ * start of that block and add on 'offset'
+ *
+ * f: Stream to read from
+ * mis: MigrationIncomingState
+ * offset: Offset within the block
+ * flags: Page flags (mostly to see if it's a continuation of previous block)
+ */
static inline void *host_from_stream_offset(QEMUFile *f,
+ MigrationIncomingState *mis,
ram_addr_t offset,
int flags)
{
@@ -1489,7 +1499,6 @@ static inline void *host_from_stream_offset(QEMUFile *f,
error_report("Ack, bad migration stream!");
return NULL;
}
-
return memory_region_get_ram_ptr(block->mr) + offset;
}
@@ -1534,6 +1543,16 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
{
int flags = 0, ret = 0;
static uint64_t seq_iter;
+ /*
+ * System is running in postcopy mode, page inserts to host memory must be
+ * atomic
+ */
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ bool postcopy_running = postcopy_state_get(mis) >=
+ POSTCOPY_INCOMING_LISTENING;
+ void *postcopy_host_page = NULL;
+ bool postcopy_place_needed = false;
+ bool matching_page_sizes = qemu_host_page_size == TARGET_PAGE_SIZE;
seq_iter++;
@@ -1549,13 +1568,57 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
rcu_read_lock();
while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
ram_addr_t addr, total_ram_bytes;
- void *host;
+ void *host = 0;
+ void *page_buffer = 0;
+ void *postcopy_place_source = 0;
uint8_t ch;
+ bool all_zero = false;
addr = qemu_get_be64(f);
flags = addr & ~TARGET_PAGE_MASK;
addr &= TARGET_PAGE_MASK;
+ if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE |
+ RAM_SAVE_FLAG_XBZRLE)) {
+ host = host_from_stream_offset(f, mis, addr, flags);
+ if (!host) {
+ error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
+ ret = -EINVAL;
+ break;
+ }
+ if (!postcopy_running) {
+ page_buffer = host;
+ } else {
+ /*
+ * Postcopy requires that we place whole host pages atomically.
+ * To make it atomic, the data is read into a temporary page
+ * that's moved into place later.
+ * The migration protocol uses, possibly smaller, target-pages
+ * however the source ensures it always sends all the
components
+ * of a host page in order.
+ */
+ if (!postcopy_host_page) {
+ postcopy_host_page = postcopy_get_tmp_page(mis);
+ }
+ page_buffer = postcopy_host_page +
+ ((uintptr_t)host & ~qemu_host_page_mask);
+ /* If all TP are zero then we can optimise the place */
+ if (!((uintptr_t)host & ~qemu_host_page_mask)) {
+ all_zero = true;
+ }
+
+ /*
+ * If it's the last part of a host page then we place the host
+ * page
+ */
+ postcopy_place_needed = (((uintptr_t)host + TARGET_PAGE_SIZE) &
+ ~qemu_host_page_mask) == 0;
+ postcopy_place_source = postcopy_host_page;
+ }
+ } else {
+ postcopy_place_needed = false;
+ }
+
switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
case RAM_SAVE_FLAG_MEM_SIZE:
/* Synchronize RAM block list */
@@ -1592,30 +1655,36 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
}
break;
case RAM_SAVE_FLAG_COMPRESS:
- host = host_from_stream_offset(f, addr, flags);
- if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
- ret = -EINVAL;
- break;
- }
ch = qemu_get_byte(f);
- ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
+ if (!postcopy_running) {
+ ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
+ } else {
+ memset(page_buffer, ch, TARGET_PAGE_SIZE);
+ if (ch) {
+ all_zero = false;
+ }
+ }
break;
+
case RAM_SAVE_FLAG_PAGE:
- host = host_from_stream_offset(f, addr, flags);
- if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
- ret = -EINVAL;
- break;
+ all_zero = false;
+ if (!postcopy_place_needed || !matching_page_sizes) {
+ qemu_get_buffer(f, page_buffer, TARGET_PAGE_SIZE);
+ } else {
+ /* Avoids the qemu_file copy during postcopy, which is
+ * going to do a copy later; can only do it when we
+ * do this read in one go (matching page sizes)
+ */
+ qemu_get_buffer_less_copy(f, (uint8_t
**)&postcopy_place_source,
+ TARGET_PAGE_SIZE);
}
- qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
break;
+
case RAM_SAVE_FLAG_XBZRLE:
- host = host_from_stream_offset(f, addr, flags);
- if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
- ret = -EINVAL;
- break;
+ all_zero = false;
+ if (postcopy_running) {
+ error_report("XBZRLE RAM block in postcopy mode @%zx\n", addr);
+ return -EINVAL;
}
if (load_xbzrle(f, addr, host) < 0) {
error_report("Failed to decompress XBZRLE page at "
@@ -1636,6 +1705,14 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
ret = -EINVAL;
}
}
+
+ if (postcopy_place_needed) {
+ /* This gets called at the last target page in the host page */
+ ret = postcopy_place_page(mis, host + TARGET_PAGE_SIZE -
+ qemu_host_page_size,
+ postcopy_place_source,
+ all_zero);
+ }
if (!ret) {
ret = qemu_file_get_error(f);
}
--
2.1.0
- [Qemu-devel] [PATCH v6 21/47] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages., (continued)
- [Qemu-devel] [PATCH v6 21/47] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages., Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 27/47] MIGRATION_STATUS_POSTCOPY_ACTIVE: Add new migration state, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 28/47] Add qemu_savevm_state_complete_postcopy, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 32/47] Postcopy: Postcopy startup in migration thread, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 30/47] postcopy: Incoming initialisation, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 33/47] Postcopy end in migration_thread, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 29/47] Postcopy: Maintain sentmap and calculate discard, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 35/47] Page request: Process incoming page request, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 36/47] Page request: Consume pages off the post-copy queue, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 34/47] Page request: Add MIG_RP_MSG_REQ_PAGES reverse command, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 38/47] Postcopy: Use helpers to map pages during migration,
Dr. David Alan Gilbert (git) <=
- [Qemu-devel] [PATCH v6 40/47] Don't sync dirty bitmaps in postcopy, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 39/47] qemu_ram_block_from_host, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 37/47] postcopy_ram.c: place_page and helpers, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 41/47] Host page!=target page: Cleanup bitmaps, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 43/47] Start up a postcopy/listener thread ready for incoming page data, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 31/47] postcopy: ram_enable_notify to switch on userfault, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 42/47] Postcopy; Handle userfault requests, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 46/47] Disable mlock around incoming postcopy, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 45/47] End of migration for postcopy, Dr. David Alan Gilbert (git), 2015/04/14
- [Qemu-devel] [PATCH v6 44/47] postcopy: Wire up loadvm_postcopy_handle_ commands, Dr. David Alan Gilbert (git), 2015/04/14