qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] Unparking vCPU mechanism


From: Mohsin Kazmi
Subject: Re: [Qemu-devel] Unparking vCPU mechanism
Date: Mon, 20 Apr 2015 14:16:53 +0200

Hi Zhu,
          I installed and enabled the --iasl=IASL at "configuration" for qemu and then "make" it.

When i tried to delete the cpu1 after adding it using hotplug/unplug, I am facing the kernel panic at guest os. Kernel version (3.11.10-301.fc20.x86_64)

address@hidden ~]# [  208.733033] general protection fault: 0000 [#1] SMP
[  208.733033] Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill ppdev crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel parport_pc parport i2c_piix4 serio_raw pvpanic microcode bochs_drm ttm drm_kms_helper drm nfsd auth_rpcgss nfs_acl lockd sunrpc virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi
[  208.733033] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.7-200.fc20.x86_64 #1
[  208.733033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[  208.733033] task: ffff880139b7b110 ti: ffff880139bbc000 task.ti: ffff880139bbc000
[  208.733033] RIP: 0010:[<ffffffff81058836>]  [<ffffffff81058836>] native_read_pmc+0x6/0x20
[  208.733033] RSP: 0018:ffff88013fc83e20  EFLAGS: 00000083
[  208.733033] RAX: 0000000000000001 RBX: ffff88013fc8b9e0 RCX: 0000000040000001
[  208.733033] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: 0000000040000001
[  208.733033] RBP: ffff88013fc83e20 R08: ffff88013fc97098 R09: 0000000000000000
[  208.733033] R10: 0000000000000001 R11: 0000000000000005 R12: ffffffff80000001
[  208.733033] R13: ffff8800b994dc00 R14: ffff8800b994dd98 R15: 0000000000000010
[  208.733033] FS:  0000000000000000(0000) GS:ffff88013fc80000(0000) knlGS:0000000000000000
[  208.733033] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  208.733033] CR2: 00007f2798f7c0b9 CR3: 0000000001c14000 CR4: 00000000000007e0
[  208.733033] Stack:
[  208.733033]  ffff88013fc83e58 ffffffff8102ab83 ffff88013fc8b9e0 ffff8800b994dc00
[  208.733033]  0000000000000004 ffff88013fc97104 ffff88013fc9708c ffff88013fc83e80
[  208.733033]  ffffffff8102ac38 ffff8800b994dc00 ffff88013fc8b9e0 ffff8800b994dc00
[  208.733033] Call Trace:
[  208.733033]  <IRQ>
[  208.733033]  [<ffffffff8102ab83>] x86_perf_event_update+0x43/0xa0
[  208.733033]  [<ffffffff8102ac38>] x86_pmu_stop+0x58/0xd0
[  208.733033]  [<ffffffff8102acf2>] x86_pmu_del+0x42/0x130
[  208.733033]  [<ffffffff8117c4b2>] event_sched_out.isra.75+0x102/0x1f0
[  208.733033]  [<ffffffff8117c7f1>] __perf_remove_from_context+0x51/0xb0
[  208.733033]  [<ffffffff8117c8e1>] __perf_event_exit_context+0x91/0xe0
[  208.733033]  [<ffffffff8110a82d>] flush_smp_call_function_queue+0x5d/0x130
[  208.733033]  [<ffffffff8110af43>] generic_smp_call_function_single_interrupt+0x13/0x60
[  208.733033]  [<ffffffff810455e7>] smp_call_function_single_interrupt+0x27/0x40
[  208.733033]  [<ffffffff8172ff7d>] call_function_single_interrupt+0x6d/0x80
[  208.733033]  <EOI>
[  208.733033]  [<ffffffff81058966>] ? native_safe_halt+0x6/0x10
[  208.733033]  [<ffffffff8101e52f>] default_idle+0x1f/0xc0
[  208.733033]  [<ffffffff8101eedf>] arch_cpu_idle+0xf/0x20
[  208.733033]  [<ffffffff810d1e24>] cpu_startup_entry+0x344/0x380
[  208.733033]  [<ffffffff811023dc>] ? clockevents_register_device+0xbc/0x120
[  208.733033]  [<ffffffff81045f30>] start_secondary+0x210/0x2d0
[  208.733033] Code: c0 48 c1 e2 20 89 0e 48 09 c2 48 89 d0 5d c3 66 0f 1f 44 00 00 55 89 f0 89 f9 48 89 e5 0f 30 31 c0 5d c3 66 90 55 89 f9 48 89 e5 <0f> 33 89 c0 48 c1 e2 20 48 09 c2 48 89 d0 5d c3 66 2e 0f 1f 84
[  208.733033] RIP  [<ffffffff81058836>] native_read_pmc+0x6/0x20
[  208.733033]  RSP <ffff88013fc83e20>
[  208.733033] ---[ end trace 01a347638d675891 ]---
[  208.733033] Kernel panic - not syncing: Fatal exception in interrupt
[  208.733033] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
[  208.733033] drm_kms_helper: panic occurred, switching back to text console
[  208.733033] ---[ end Kernel panic - not syncing: Fatal exception in interrupt


Can you please help me in that?


On Mon, Apr 20, 2015 at 11:19 AM, Zhu Guihua <address@hidden> wrote:

On 04/16/2015 06:50 PM, Mohsin Kazmi wrote:
Hi Zhu,
          I am testing the hot unplug feature using your github branch 'cpu-hotplug'. It is working fine when first time I added and deleted cpu. But when I tried to add cpu second time, it showed me the following error:
(qemu) device_add kvm64-x86_64-cpu,apic-id=1,id=cpu1
           Duplicate ID 'cpu1' for device


Sorry for late reply.
I guess you should use iasl and regenerate the ACPI tables.

You can refer to the following issue:
http://lists.nongnu.org/archive/html/qemu-devel/2014-09/msg02993.html

Thanks,
Zhu

I get from one of your patch (https://patchwork.ozlabs.org/patch/439485/) commit message that cpu is not literally removed from qemu but guest is unable to use it anymore. Do you know the way how I can reuse that cpu which has already added and deleted once. Or unparking the cpu mechanism.

Thanks,
Mohsin Kazmi



reply via email to

[Prev in Thread] Current Thread [Next in Thread]