Re: [Qemu-devel] [PATCHv2 1/3] Add specific config options for PCI-E bridges

[Shannon Zhao]

Hi,

On 2015/5/19 10:40, Shannon Zhao wrote:
> Hi,
> 
> I'm testing PCIe root port (ioh3420) on ARM64. Firstly I use following
> simple command line to check whether it works.
> 
> qemu-system-aarch64 -M virt -device ioh3420
> 
> But it fails with below log:
> 
> qemu-system-aarch64: -device ioh3420: Device initialization failed
> qemu-system-aarch64: -device ioh3420: Device 'ioh3420' could not be
> initialized
> 

I found that it fails at ioh3420_initfn when calling msi_init, while
upstream qemu doesn't support msi on ARM64, so msi_init return -ENOTSUP
and ioh3420_initfn fails.

After I apply the following patch from Christoffer, the ioh3420 works.
  [PATCH v2 0/3] Add support for for GICv2m and MSIs to arm-virt

But do we need to fix the failure for the current upstream qemu?

> Is there something wrong with my command line? or ioh3420 can't be used
> on ARM64? But from this patch and the discussions on it, it seems
> ioh3420 should work on ARM64.
> 
> Thanks,
> Shannon
> 
> On 2015/2/27 14:04, David Gibson wrote:
>> The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
>> included in the build unconditionally.
>>
>> While they could theoretically appear on any target platform with PCI-E,
>> they're pretty unlikely to appear on platforms that aren't Intel derived.
>>
>> Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
>> add config options to enable these components, and enable them by default
>> only on x86 and arm platforms.
>>
>> (Note that this patch does include these for aarch64, via its inclusion of
>> arm-softmmu.mak).
>>
>> Signed-off-by: David Gibson <address@hidden>
>> Reviewed-by: Peter Crosthwaite <address@hidden>
>> ---
>>  default-configs/arm-softmmu.mak    | 4 ++++
>>  default-configs/i386-softmmu.mak   | 3 +++
>>  default-configs/x86_64-softmmu.mak | 3 +++
>>  hw/pci-bridge/Makefile.objs        | 5 +++--
>>  4 files changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/default-configs/arm-softmmu.mak 
>> b/default-configs/arm-softmmu.mak
>> index b00c2e1..6ee9b43 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -91,3 +91,7 @@ CONFIG_INTEGRATOR_DEBUG=y
>>  CONFIG_ALLWINNER_A10_PIT=y
>>  CONFIG_ALLWINNER_A10_PIC=y
>>  CONFIG_ALLWINNER_A10=y
>> +
>> +CONFIG_XIO3130=y
>> +CONFIG_IOH3420=y
>> +CONFIG_I82801B11=y
>> diff --git a/default-configs/i386-softmmu.mak 
>> b/default-configs/i386-softmmu.mak
>> index bd99af9..0b8ce4b 100644
>> --- a/default-configs/i386-softmmu.mak
>> +++ b/default-configs/i386-softmmu.mak
>> @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>>  CONFIG_ICC_BUS=y
>>  CONFIG_PVPANIC=y
>>  CONFIG_MEM_HOTPLUG=y
>> +CONFIG_XIO3130=y
>> +CONFIG_IOH3420=y
>> +CONFIG_I82801B11=y
>> diff --git a/default-configs/x86_64-softmmu.mak 
>> b/default-configs/x86_64-softmmu.mak
>> index e7c2734..6add04a 100644
>> --- a/default-configs/x86_64-softmmu.mak
>> +++ b/default-configs/x86_64-softmmu.mak
>> @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>>  CONFIG_ICC_BUS=y
>>  CONFIG_PVPANIC=y
>>  CONFIG_MEM_HOTPLUG=y
>> +CONFIG_XIO3130=y
>> +CONFIG_IOH3420=y
>> +CONFIG_I82801B11=y
>> diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
>> index 968b369..96c596e 100644
>> --- a/hw/pci-bridge/Makefile.objs
>> +++ b/hw/pci-bridge/Makefile.objs
>> @@ -1,5 +1,6 @@
>>  common-obj-y += pci_bridge_dev.o
>> -common-obj-y += ioh3420.o xio3130_upstream.o xio3130_downstream.o
>> -common-obj-y += i82801b11.o
>> +common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
>> +common-obj-$(CONFIG_IOH3420) += ioh3420.o
>> +common-obj-$(CONFIG_I82801B11) += i82801b11.o
>>  # NewWorld PowerMac
>>  common-obj-$(CONFIG_DEC_PCI) += dec.o
>>
> 
> 
> 
> .
> 

-- 
Shannon