qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 2/4] rocker: update tests using hw-derived interf


From: sfeldma
Subject: [Qemu-devel] [PATCH v3 2/4] rocker: update tests using hw-derived interface names
Date: Fri, 29 May 2015 07:01:47 -0700

From: Scott Feldman <address@hidden>

With previous patch to support phy name attribute for each port, the OS
can name port interfaces using the hw-derived name.  So update rocker
tests to use the new hw-derived interface names.

Signed-off-by: Scott Feldman <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
---
 tests/rocker/bridge          |   25 ++++++++++---------------
 tests/rocker/bridge-stp      |   25 ++++++++++---------------
 tests/rocker/bridge-vlan     |   37 ++++++++++++++++---------------------
 tests/rocker/bridge-vlan-stp |   37 ++++++++++++++++---------------------
 tests/rocker/port            |    8 ++++----
 5 files changed, 56 insertions(+), 76 deletions(-)

diff --git a/tests/rocker/bridge b/tests/rocker/bridge
index 7a03f9a..46abc6f 100755
--- a/tests/rocker/bridge
+++ b/tests/rocker/bridge
@@ -9,8 +9,8 @@ while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; 
do sleep 1; done
 # configure a 2-port bridge
 
 simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p2 master br0"
 
 # turn off vlan default_pvid on br0
 
@@ -18,28 +18,23 @@ simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pv
 
 # turn off learning and flooding in SW
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 learning off"
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
-
-# turn on learning in HW
-
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 flood off"
 
 # bring up bridge and ports
 
 simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p2 up"
 simp ssh tut sw1 --cmd "sudo ifconfig br0 11.0.0.3/24"
 
 # config IP on hosts
 
-simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
-simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1 11.0.0.2/24"
 
 # test...
 
diff --git a/tests/rocker/bridge-stp b/tests/rocker/bridge-stp
index 4a111a1..008568a 100755
--- a/tests/rocker/bridge-stp
+++ b/tests/rocker/bridge-stp
@@ -10,8 +10,8 @@ while ! simp ssh tut h2 --cmd "ping -c 1 localhost 
>/dev/null"; do sleep 1; done
 
 simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
 simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p2 master br0"
 
 # turn off vlan default_pvid on br0
 
@@ -19,27 +19,22 @@ simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pv
 
 # turn off learning and flooding in SW
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 learning off"
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
-
-# turn on learning in HW
-
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 flood off"
 
 # config IP on hosts
 
-simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
-simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1 11.0.0.2/24"
 
 # bring up bridge and ports
 
 simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p2 up"
 
 # test...
 
diff --git a/tests/rocker/bridge-vlan b/tests/rocker/bridge-vlan
index 9fa3431..e32dd0c 100755
--- a/tests/rocker/bridge-vlan
+++ b/tests/rocker/bridge-vlan
@@ -9,8 +9,8 @@ while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; 
do sleep 1; done
 # configure a 2-port bridge
 
 simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p2 master br0"
 
 # turn off vlan default_pvid on br0
 # turn on vlan filtering on br0
@@ -20,37 +20,32 @@ simp ssh tut sw1 --cmd "echo 1 | sudo dd 
of=/sys/class/net/br0/bridge/vlan_filte
 
 # add both ports to VLAN 57
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev sw1p1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev sw1p2 master"
 
 # turn off learning and flooding in SW
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 learning off"
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
-
-# turn on learning in HW
-
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 flood off"
 
 # bring up bridge and ports
 
 simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p2 up"
 
 # config IP on host VLANs
 
-simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
-simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+simp ssh tut h1 --cmd "sudo vconfig add sw1p1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1.57 11.0.0.1/24"
 
-simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
-simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
-simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo vconfig add sw1p1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1.57 11.0.0.2/24"
 
 # test...
 
diff --git a/tests/rocker/bridge-vlan-stp b/tests/rocker/bridge-vlan-stp
index 77ab67e..8170819 100755
--- a/tests/rocker/bridge-vlan-stp
+++ b/tests/rocker/bridge-vlan-stp
@@ -10,8 +10,8 @@ while ! simp ssh tut h2 --cmd "ping -c 1 localhost 
>/dev/null"; do sleep 1; done
 
 simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
 simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
-simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev sw1p2 master br0"
 
 # turn off vlan default_pvid on br0
 # turn on vlan filtering on br0
@@ -21,37 +21,32 @@ simp ssh tut sw1 --cmd "echo 1 | sudo dd 
of=/sys/class/net/br0/bridge/vlan_filte
 
 # add both ports to VLAN 57
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev sw1p1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev sw1p2 master"
 
 # turn off learning and flooding in SW
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 learning off"
 
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
-
-# turn on learning in HW
-
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
-simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev sw1p2 flood off"
 
 # config IP on host VLANs
 
-simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
-simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+simp ssh tut h1 --cmd "sudo vconfig add sw1p1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1.57 11.0.0.1/24"
 
-simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
-simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
-simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo vconfig add sw1p1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1.57 11.0.0.2/24"
 
 # bring up bridge and ports
 
 simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
-simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p2 up"
 
 # test...
 
diff --git a/tests/rocker/port b/tests/rocker/port
index 3437f7d..5f2c248 100755
--- a/tests/rocker/port
+++ b/tests/rocker/port
@@ -7,13 +7,13 @@ while ! simp ssh tut h2 --cmd "ping -c 1 localhost 
>/dev/null"; do sleep 1; done
 
 # bring up DUT ports
 
-simp ssh tut sw1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
-simp ssh tut sw1 --cmd "sudo ifconfig swp2 12.0.0.1/24"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p1 11.0.0.1/24"
+simp ssh tut sw1 --cmd "sudo ifconfig sw1p2 12.0.0.1/24"
 
 # config IP on hosts
 
-simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.2/24"
-simp ssh tut h2 --cmd "sudo ifconfig swp1 12.0.0.2/24"
+simp ssh tut h1 --cmd "sudo ifconfig sw1p1 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo ifconfig sw1p1 12.0.0.2/24"
 
 # test...
 
-- 
1.7.10.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]