qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 19/22] hw/arm/sysbus-fdt: helpers for platform bus no


From: Peter Maydell
Subject: [Qemu-devel] [PULL 19/22] hw/arm/sysbus-fdt: helpers for platform bus nodes addition
Date: Tue, 2 Jun 2015 17:33:49 +0100

From: Eric Auger <address@hidden>

This new C module will be used by ARM machine files to generate
platform bus node and their dynamic sysbus device tree nodes.

Dynamic sysbus device node addition is done in a machine init
done notifier. arm_register_platform_bus_fdt_creator does the
registration of this latter and is supposed to be called by
ARM machine files that support platform bus and their dynamic
sysbus. Addition of dynamic sysbus nodes is done only if the
user did not provide any dtb.

Signed-off-by: Alexander Graf <address@hidden>
Signed-off-by: Eric Auger <address@hidden>
Reviewed-by: Shannon Zhao <address@hidden>
Reviewed-by: Alexander Graf <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
 hw/arm/Makefile.objs        |   1 +
 hw/arm/sysbus-fdt.c         | 174 ++++++++++++++++++++++++++++++++++++++++++++
 include/hw/arm/sysbus-fdt.h |  60 +++++++++++++++
 3 files changed, 235 insertions(+)
 create mode 100644 hw/arm/sysbus-fdt.c
 create mode 100644 include/hw/arm/sysbus-fdt.h

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 4b09caf..cf346c1 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -5,6 +5,7 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
 obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
 obj-y += netduino2.o
+obj-y += sysbus-fdt.o
 
 obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
 obj-$(CONFIG_DIGIC) += digic.o
diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c
new file mode 100644
index 0000000..3038b94
--- /dev/null
+++ b/hw/arm/sysbus-fdt.c
@@ -0,0 +1,174 @@
+/*
+ * ARM Platform Bus device tree generation helpers
+ *
+ * Copyright (c) 2014 Linaro Limited
+ *
+ * Authors:
+ *  Alex Graf <address@hidden>
+ *  Eric Auger <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "hw/arm/sysbus-fdt.h"
+#include "qemu/error-report.h"
+#include "sysemu/device_tree.h"
+#include "hw/platform-bus.h"
+#include "sysemu/sysemu.h"
+
+/*
+ * internal struct that contains the information to create dynamic
+ * sysbus device node
+ */
+typedef struct PlatformBusFDTData {
+    void *fdt; /* device tree handle */
+    int irq_start; /* index of the first IRQ usable by platform bus devices */
+    const char *pbus_node_name; /* name of the platform bus node */
+    PlatformBusDevice *pbus;
+} PlatformBusFDTData;
+
+/*
+ * struct used when calling the machine init done notifier
+ * that constructs the fdt nodes of platform bus devices
+ */
+typedef struct PlatformBusFDTNotifierParams {
+    Notifier notifier;
+    ARMPlatformBusFDTParams *fdt_params;
+} PlatformBusFDTNotifierParams;
+
+/* struct that associates a device type name and a node creation function */
+typedef struct NodeCreationPair {
+    const char *typename;
+    int (*add_fdt_node_fn)(SysBusDevice *sbdev, void *opaque);
+} NodeCreationPair;
+
+/* list of supported dynamic sysbus devices */
+static const NodeCreationPair add_fdt_node_functions[] = {
+    {"", NULL}, /* last element */
+};
+
+/**
+ * add_fdt_node - add the device tree node of a dynamic sysbus device
+ *
+ * @sbdev: handle to the sysbus device
+ * @opaque: handle to the PlatformBusFDTData
+ *
+ * Checks the sysbus type belongs to the list of device types that
+ * are dynamically instantiable and if so call the node creation
+ * function.
+ */
+static int add_fdt_node(SysBusDevice *sbdev, void *opaque)
+{
+    int i, ret;
+
+    for (i = 0; i < ARRAY_SIZE(add_fdt_node_functions); i++) {
+        if (!strcmp(object_get_typename(OBJECT(sbdev)),
+                    add_fdt_node_functions[i].typename)) {
+            ret = add_fdt_node_functions[i].add_fdt_node_fn(sbdev, opaque);
+            assert(!ret);
+            return 0;
+        }
+    }
+    error_report("Device %s can not be dynamically instantiated",
+                     qdev_fw_name(DEVICE(sbdev)));
+    exit(1);
+}
+
+/**
+ * add_all_platform_bus_fdt_nodes - create all the platform bus nodes
+ *
+ * builds the parent platform bus node and all the nodes of dynamic
+ * sysbus devices attached to it.
+ */
+static void add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params)
+{
+    const char platcomp[] = "qemu,platform\0simple-bus";
+    PlatformBusDevice *pbus;
+    DeviceState *dev;
+    gchar *node;
+    uint64_t addr, size;
+    int irq_start, dtb_size;
+    struct arm_boot_info *info = fdt_params->binfo;
+    const ARMPlatformBusSystemParams *params = fdt_params->system_params;
+    const char *intc = fdt_params->intc;
+    void *fdt = info->get_dtb(info, &dtb_size);
+
+    /*
+     * If the user provided a dtb, we assume the dynamic sysbus nodes
+     * already are integrated there. This corresponds to a use case where
+     * the dynamic sysbus nodes are complex and their generation is not yet
+     * supported. In that case the user can take charge of the guest dt
+     * while qemu takes charge of the qom stuff.
+     */
+    if (info->dtb_filename) {
+        return;
+    }
+
+    assert(fdt);
+
+    node = g_strdup_printf("/address@hidden"PRIx64, params->platform_bus_base);
+    addr = params->platform_bus_base;
+    size = params->platform_bus_size;
+    irq_start = params->platform_bus_first_irq;
+
+    /* Create a /platform node that we can put all devices into */
+    qemu_fdt_add_subnode(fdt, node);
+    qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp));
+
+    /* Our platform bus region is less than 32bits, so 1 cell is enough for
+     * address and size
+     */
+    qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1);
+    qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1);
+    qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size);
+
+    qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", intc);
+
+    dev = qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE);
+    pbus = PLATFORM_BUS_DEVICE(dev);
+
+    /* We can only create dt nodes for dynamic devices when they're ready */
+    assert(pbus->done_gathering);
+
+    PlatformBusFDTData data = {
+        .fdt = fdt,
+        .irq_start = irq_start,
+        .pbus_node_name = node,
+        .pbus = pbus,
+    };
+
+    /* Loop through all dynamic sysbus devices and create their node */
+    foreach_dynamic_sysbus_device(add_fdt_node, &data);
+
+    g_free(node);
+}
+
+static void platform_bus_fdt_notify(Notifier *notifier, void *data)
+{
+    PlatformBusFDTNotifierParams *p = DO_UPCAST(PlatformBusFDTNotifierParams,
+                                                notifier, notifier);
+
+    add_all_platform_bus_fdt_nodes(p->fdt_params);
+    g_free(p->fdt_params);
+    g_free(p);
+}
+
+void arm_register_platform_bus_fdt_creator(ARMPlatformBusFDTParams *fdt_params)
+{
+    PlatformBusFDTNotifierParams *p = g_new(PlatformBusFDTNotifierParams, 1);
+
+    p->fdt_params = fdt_params;
+    p->notifier.notify = platform_bus_fdt_notify;
+    qemu_add_machine_init_done_notifier(&p->notifier);
+}
diff --git a/include/hw/arm/sysbus-fdt.h b/include/hw/arm/sysbus-fdt.h
new file mode 100644
index 0000000..e15bb81
--- /dev/null
+++ b/include/hw/arm/sysbus-fdt.h
@@ -0,0 +1,60 @@
+/*
+ * Dynamic sysbus device tree node generation API
+ *
+ * Copyright Linaro Limited, 2014
+ *
+ * Authors:
+ *  Alex Graf <address@hidden>
+ *  Eric Auger <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef HW_ARM_SYSBUS_FDT_H
+#define HW_ARM_SYSBUS_FDT_H
+
+#include "hw/arm/arm.h"
+#include "qemu-common.h"
+#include "hw/sysbus.h"
+
+/*
+ * struct that contains dimensioning parameters of the platform bus
+ */
+typedef struct {
+    hwaddr platform_bus_base; /* start address of the bus */
+    hwaddr platform_bus_size; /* size of the bus */
+    int platform_bus_first_irq; /* first hwirq assigned to the bus */
+    int platform_bus_num_irqs; /* number of hwirq assigned to the bus */
+} ARMPlatformBusSystemParams;
+
+/*
+ * struct that contains all relevant info to build the fdt nodes of
+ * platform bus and attached dynamic sysbus devices
+ * in the future might be augmented with additional info
+ * such as PHY, CLK handles ...
+ */
+typedef struct {
+    const ARMPlatformBusSystemParams *system_params;
+    struct arm_boot_info *binfo;
+    const char *intc; /* parent interrupt controller name */
+} ARMPlatformBusFDTParams;
+
+/**
+ * arm_register_platform_bus_fdt_creator - register a machine init done
+ * notifier that creates the device tree nodes of the platform bus and
+ * associated dynamic sysbus devices
+ */
+void arm_register_platform_bus_fdt_creator(ARMPlatformBusFDTParams 
*fdt_params);
+
+#endif
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]