qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH] target-arm: Do not reset sysregs marked as ALIAS


From: Sergey Fedorov
Subject: [Qemu-devel] [PATCH] target-arm: Do not reset sysregs marked as ALIAS
Date: Wed, 17 Jun 2015 18:25:13 +0300

cp_reg_reset() is called from g_hash_table_foreach() which does not
define a specific ordering of the hash table iteration. Thus doing reset
for registers marked as ALIAS would give an ambiguous result when
resetvalue is different for original and alias resisters. Exit
cp_reg_reset() early when passed an alias register. Then clean up alias
register definitions from needless resetvalue and resetfn.

Signed-off-by: Sergey Fedorov <address@hidden>
---
 target-arm/cpu.c    |  2 +-
 target-arm/cpu.h    |  4 ++--
 target-arm/helper.c | 28 +++++++++-------------------
 3 files changed, 12 insertions(+), 22 deletions(-)

diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index 7496983..4bb821b 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -55,7 +55,7 @@ static void cp_reg_reset(gpointer key, gpointer value, 
gpointer opaque)
     ARMCPRegInfo *ri = value;
     ARMCPU *cpu = opaque;
 
-    if (ri->type & ARM_CP_SPECIAL) {
+    if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS)) {
         return;
     }
 
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index c9d2330..2f59058 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -1116,8 +1116,8 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
  * old must have the OVERRIDE bit set.
  * ALIAS indicates that this register is an alias view of some underlying
  * state which is also visible via another register, and that the other
- * register is handling migration; registers marked ALIAS will not be migrated
- * but may have their state set by syncing of register state from KVM.
+ * register is handling migration and reset; registers marked ALIAS will not be
+ * migrated but may have their state set by syncing of register state from KVM.
  * NO_RAW indicates that this register has no underlying state and does not
  * support raw access for state saving/loading; it will not be used for either
  * migration or KVM state synchronization. (Typically this is for "registers"
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 00509b1..fbf20b6 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -984,7 +984,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 
2,
       .access = PL1_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
-      .resetvalue = 0, .writefn = pmintenclr_write, },
+      .writefn = pmintenclr_write, },
     { .name = "VBAR", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .writefn = vbar_write,
@@ -1323,7 +1323,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
       .type = ARM_CP_ALIAS,
       .access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c14_cntfrq),
-      .resetfn = arm_cp_reset_ignore,
     },
     { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0,
@@ -1344,7 +1343,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_PHYS].ctl),
-      .resetfn = arm_cp_reset_ignore,
       .writefn = gt_ctl_write, .raw_writefn = raw_write,
     },
     { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1360,7 +1358,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
       .accessfn = gt_vtimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_VIRT].ctl),
-      .resetfn = arm_cp_reset_ignore,
       .writefn = gt_ctl_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1422,7 +1419,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
       .access = PL1_RW | PL0_R,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
-      .accessfn = gt_ptimer_access, .resetfn = arm_cp_reset_ignore,
+      .accessfn = gt_ptimer_access,
       .writefn = gt_cval_write, .raw_writefn = raw_write,
     },
     { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1437,7 +1434,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
       .access = PL1_RW | PL0_R,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
-      .accessfn = gt_vtimer_access, .resetfn = arm_cp_reset_ignore,
+      .accessfn = gt_vtimer_access,
       .writefn = gt_cval_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1714,12 +1711,10 @@ static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
     { .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap),
-      .resetvalue = 0,
       .readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
     { .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
       .access = PL1_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap),
-      .resetvalue = 0,
       .readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
     { .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 
2,
       .access = PL1_RW,
@@ -1851,8 +1846,7 @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = {
     { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .type = ARM_CP_ALIAS,
       .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s),
-                             offsetoflow32(CPUARMState, cp15.dfsr_ns) },
-      .resetfn = arm_cp_reset_ignore, },
+                             offsetoflow32(CPUARMState, cp15.dfsr_ns) }, },
     { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
       .access = PL1_RW, .resetvalue = 0,
       .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s),
@@ -1890,7 +1884,7 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) },
     { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
       .access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write,
-      .resetfn = arm_cp_reset_ignore, .raw_writefn = vmsa_ttbcr_raw_write,
+      .raw_writefn = vmsa_ttbcr_raw_write,
       .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]),
                              offsetoflow32(CPUARMState, cp15.tcr_el[1])} },
     REGINFO_SENTINEL
@@ -2109,12 +2103,12 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
                              offsetof(CPUARMState, cp15.ttbr0_ns) },
-      .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
+      .writefn = vmsa_ttbr_write, },
     { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
                              offsetof(CPUARMState, cp15.ttbr1_ns) },
-      .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
+      .writefn = vmsa_ttbr_write, },
     REGINFO_SENTINEL
 };
 
@@ -2641,7 +2635,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
     { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
       .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
-      .resetvalue = 0,
       .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
     { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
@@ -2666,7 +2659,7 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
     { .name = "SCR",  .type = ARM_CP_ALIAS,
       .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
       .access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, 
cp15.scr_el3),
-      .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
+      .writefn = scr_write },
     { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
       .access = PL3_RW, .resetvalue = 0,
@@ -2761,8 +2754,7 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
       .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
       .type = ARM_CP_ALIAS,
       .access = PL1_R,
-      .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1),
-      .resetfn = arm_cp_reset_ignore },
+      .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), },
     /* We define a dummy WI OSLAR_EL1, because Linux writes to it. */
     { .name = "OSLAR_EL1", .state = ARM_CP_STATE_BOTH,
       .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 4,
@@ -3721,14 +3713,12 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const 
ARMCPRegInfo *r,
             if ((r->state == ARM_CP_STATE_BOTH && ns) ||
                 (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) {
                 r2->type |= ARM_CP_ALIAS;
-                r2->resetfn = arm_cp_reset_ignore;
             }
         } else if ((secstate != r->secure) && !ns) {
             /* The register is not banked so we only want to allow migration of
              * the non-secure instance.
              */
             r2->type |= ARM_CP_ALIAS;
-            r2->resetfn = arm_cp_reset_ignore;
         }
 
         if (r->state == ARM_CP_STATE_BOTH) {
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]