qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [v11 08/15] vfio: add check host bus reset is support or no


From: Chen Fan
Subject: [Qemu-devel] [v11 08/15] vfio: add check host bus reset is support or not
Date: Wed, 24 Jun 2015 17:46:01 +0800

when init vfio devices done, we should test all the devices supported
aer whether conflict with others. For each one, get the hot reset
info for the affected device list.  For each affected device, all
should attach to the VM and on the same slot. also, we should test
all of the non-AER supporting vfio-pci devices on or below the target
bus to verify they have a reset mechanism.

Signed-off-by: Chen Fan <address@hidden>
---
 hw/vfio/pci.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 206 insertions(+), 7 deletions(-)

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index e1bbd03..c2af8f1 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -32,6 +32,7 @@
 #include "hw/pci/msi.h"
 #include "hw/pci/msix.h"
 #include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
 #include "hw/pci/pci_bridge.h"
 #include "qemu-common.h"
 #include "qemu/error-report.h"
@@ -2822,6 +2823,184 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, 
uint8_t pos)
     return 0;
 }
 
+static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
+                                PCIHostDeviceAddress *host2)
+{
+    return (host1->domain == host2->domain && host1->bus == host2->bus &&
+            host1->slot == host2->slot && host1->function == host2->function);
+}
+
+struct VFIODeviceFind {
+    PCIDevice *pdev;
+    bool found;
+};
+
+static void vfio_check_device_reset(PCIBus *bus, void *opaque)
+{
+    int i;
+    PCIDevice *dev;
+    VFIOPCIDevice *vdev;
+    struct VFIODeviceFind *find = opaque;
+
+    if (find->found) {
+        return;
+    }
+
+    for (i = 0; i < ARRAY_SIZE(bus->devices); i++) {
+        if (!bus->devices[i]) {
+            continue;
+        }
+        dev = bus->devices[i];
+        if (!object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
+            continue;
+        }
+        vdev = DO_UPCAST(VFIOPCIDevice, pdev, dev);
+        if (!(vdev->features & VFIO_FEATURE_ENABLE_AER) &&
+            !vdev->vbasedev.reset_works) {
+            find->pdev = dev;
+            find->found = true;
+            break;
+        }
+    }
+}
+
+static int vfio_check_host_bus_reset(VFIOPCIDevice *vdev)
+{
+    PCIBus *bus = vdev->pdev.bus;
+    PCIDevice *pdev = &vdev->pdev;
+    struct vfio_pci_hot_reset_info *info = NULL;
+    struct vfio_pci_dependent_device *devices;
+    VFIOGroup *group;
+    struct VFIODeviceFind find;
+    bool hotplugged = DEVICE(vdev)->hotplugged;
+    int ret, i;
+
+    ret = vfio_get_hot_reset_info(vdev, &info);
+    if (ret) {
+        error_report("vfio: Cannot get hot reset info");
+        goto out;
+    }
+
+    /* we only support hotplug device is single function */
+    if (hotplugged && info->count > 1) {
+        error_report("vfio: Cannot enable AER for device %s, "
+                     "hotplug device only support single function.",
+                     vdev->vbasedev.name);
+        ret = -1;
+        goto out;
+    }
+
+    /* List all affected devices by bus reset */
+    devices = &info->devices[0];
+
+    /* Verify that we have all the groups required */
+    for (i = 0; i < info->count; i++) {
+        PCIHostDeviceAddress host;
+        VFIOPCIDevice *tmp;
+        VFIODevice *vbasedev_iter;
+        bool found = false;
+
+        host.domain = devices[i].segment;
+        host.bus = devices[i].bus;
+        host.slot = PCI_SLOT(devices[i].devfn);
+        host.function = PCI_FUNC(devices[i].devfn);
+
+        /* Skip the current device */
+        if (vfio_pci_host_match(&host, &vdev->host)) {
+            continue;
+        }
+
+        /* Ensure we own the group of the affected device */
+        QLIST_FOREACH(group, &vfio_group_list, next) {
+            if (group->groupid == devices[i].group_id) {
+                break;
+            }
+        }
+
+        if (!group) {
+            error_report("vfio: Cannot enable AER for device %s, "
+                         "depends on group %d which is not owned.",
+                         vdev->vbasedev.name, devices[i].group_id);
+            ret = -1;
+            goto out;
+        }
+
+        /* Ensure affected devices for reset on the same slot */
+        QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+            if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+                continue;
+            }
+            tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
+            if (vfio_pci_host_match(&host, &tmp->host)) {
+                PCIDevice *pci = PCI_DEVICE(tmp);
+
+                if (pci->bus == pdev->bus &&
+                    PCI_SLOT(pci->devfn) == PCI_SLOT(pdev->devfn)) {
+                    found = true;
+                } else {
+                    error_report("vfio: Cannot enable AER for device %s, "
+                                 "the dependent device %s is not on the same 
slot",
+                                 vdev->vbasedev.name, tmp->vbasedev.name);
+                    ret = -1;
+                    goto out;
+                }
+                break;
+            }
+        }
+
+        /* Ensure all affected devices assigned to VM */
+        if (!found) {
+            error_report("vfio: Cannot enable AER for device %s, "
+                         "the dependent device %04x:%02x:%02x.%x "
+                         "is not assigned to VM.",
+                         vdev->vbasedev.name, host.domain, host.bus,
+                         host.slot, host.function);
+            ret = -1;
+            goto out;
+        }
+    }
+
+    /*
+     * Check the all vfio pci devices on or below the target bus
+     * have a reset mechanism at least.
+     */
+    find.pdev = NULL;
+    find.found = false;
+    pci_for_each_bus(bus, vfio_check_device_reset, &find);
+    if (find.found) {
+        error_report("vfio: Cannot enable AER for device %s, "
+                     "the affected device %s have not a reset mechanism.",
+                     vdev->vbasedev.name, find.pdev->name);
+        ret = -1;
+        goto out;
+    }
+
+    ret = 0;
+out:
+    g_free(info);
+    return ret;
+}
+
+static int vfio_check_devices_host_bus_reset(void)
+{
+    VFIOGroup *group;
+    VFIODevice *vbasedev;
+    VFIOPCIDevice *vdev;
+
+    /* Check All vfio-pci devices if have bus reset capability */
+    QLIST_FOREACH(group, &vfio_group_list, next) {
+        QLIST_FOREACH(vbasedev, &group->device_list, next) {
+            vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+            if ((vdev->features & VFIO_FEATURE_ENABLE_AER) &&
+                vfio_check_host_bus_reset(vdev)) {
+                return -1;
+            }
+        }
+    }
+
+    return 0;
+}
+
 static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
                           int pos, uint16_t size)
 {
@@ -2858,6 +3037,14 @@ static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t 
cap_ver,
         dev_iter = pci_bridge_get_device(dev_iter->bus);
     }
 
+    if (DEVICE(vdev)->hotplugged) {
+        /* Make sure this device does not conflict the existing aer topology */
+        ret = vfio_check_devices_host_bus_reset();
+        if (ret) {
+            return ret;
+        }
+    }
+
     errcap = vfio_pci_read_config(pdev, pdev->exp.aer_cap + PCI_ERR_CAP, 4);
     /*
      * The ability to record multiple headers is depending on
@@ -3013,13 +3200,6 @@ static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
     vfio_enable_intx(vdev);
 }
 
-static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
-                                PCIHostDeviceAddress *host2)
-{
-    return (host1->domain == host2->domain && host1->bus == host2->bus &&
-            host1->slot == host2->slot && host1->function == host2->function);
-}
-
 static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single)
 {
     VFIOGroup *group;
@@ -3681,6 +3861,20 @@ static void vfio_setup_resetfn(VFIOPCIDevice *vdev)
     }
 }
 
+static void vfio_pci_machine_done_notify(Notifier *notifier, void *unused)
+{
+    int ret;
+
+    ret = vfio_check_devices_host_bus_reset();
+    if (ret) {
+        exit(1);
+    }
+}
+
+static Notifier machine_notifier = {
+    .notify = vfio_pci_machine_done_notify,
+};
+
 static int vfio_initfn(PCIDevice *pdev)
 {
     VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
@@ -3966,6 +4160,11 @@ static const TypeInfo vfio_pci_dev_info = {
 static void register_vfio_pci_dev_type(void)
 {
     type_register_static(&vfio_pci_dev_info);
+    /*
+     * Register notifier when machine init is done, since we need
+     * check the configration manner after all vfio device are inited.
+     */
+    qemu_add_machine_init_done_notifier(&machine_notifier);
 }
 
 type_init(register_vfio_pci_dev_type)
-- 
1.9.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]