qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH pic32 v2 5/5] Two new machine platforms: pic32mz


From: Antony Pavlov
Subject: Re: [Qemu-devel] [PATCH pic32 v2 5/5] Two new machine platforms: pic32mz7 and pic32mz.
Date: Thu, 2 Jul 2015 08:56:40 +0300

On Tue, 30 Jun 2015 21:12:34 -0700
Serge Vakulenko <address@hidden> wrote:

> Signed-off-by: Serge Vakulenko <address@hidden>
> ---
>  hw/mips/Makefile.objs       |    3 +
>  hw/mips/mips_pic32mx7.c     | 1652 +++++++++++++++++++++++++
>  hw/mips/mips_pic32mz.c      | 2840 
> +++++++++++++++++++++++++++++++++++++++++++
>  hw/mips/pic32_ethernet.c    |  557 +++++++++
>  hw/mips/pic32_gpio.c        |   39 +
>  hw/mips/pic32_load_hex.c    |  238 ++++
>  hw/mips/pic32_peripherals.h |  210 ++++
>  hw/mips/pic32_sdcard.c      |  428 +++++++
>  hw/mips/pic32_spi.c         |  121 ++
>  hw/mips/pic32_uart.c        |  228 ++++
>  hw/mips/pic32mx.h           | 1290 ++++++++++++++++++++
>  hw/mips/pic32mz.h           | 2093 +++++++++++++++++++++++++++++++
>  12 files changed, 9699 insertions(+)
>  create mode 100644 hw/mips/mips_pic32mx7.c
>  create mode 100644 hw/mips/mips_pic32mz.c
>  create mode 100644 hw/mips/pic32_ethernet.c
>  create mode 100644 hw/mips/pic32_gpio.c
>  create mode 100644 hw/mips/pic32_load_hex.c
>  create mode 100644 hw/mips/pic32_peripherals.h
>  create mode 100644 hw/mips/pic32_sdcard.c
>  create mode 100644 hw/mips/pic32_spi.c
>  create mode 100644 hw/mips/pic32_uart.c
>  create mode 100644 hw/mips/pic32mx.h
>  create mode 100644 hw/mips/pic32mz.h
> 
> diff --git a/hw/mips/Makefile.objs b/hw/mips/Makefile.objs
> index 9633f3a..dcbaec9 100644
> --- a/hw/mips/Makefile.objs
> +++ b/hw/mips/Makefile.objs
> @@ -3,3 +3,6 @@ obj-y += addr.o cputimer.o mips_int.o
>  obj-$(CONFIG_JAZZ) += mips_jazz.o
>  obj-$(CONFIG_FULONG) += mips_fulong2e.o
>  obj-y += gt64xxx_pci.o
> +obj-y += mips_pic32mz.o mips_pic32mx7.o
> +obj-y += pic32_load_hex.o pic32_sdcard.o pic32_spi.o pic32_uart.o 
> pic32_gpio.o
> +obj-y += pic32_ethernet.o

Can we move mips-unrelated stuff to the appropriate dirs?
E.g. pic32_gpio.c can to go to hw/gpio.
Also please use separate patch for every peripheral controller (see Aurelien's 
comment).


> diff --git a/hw/mips/mips_pic32mx7.c b/hw/mips/mips_pic32mx7.c
> new file mode 100644
> index 0000000..1d8ffb5
> --- /dev/null
> +++ b/hw/mips/mips_pic32mx7.c
> @@ -0,0 +1,1652 @@
> +/*
> + * QEMU support for Microchip PIC32MX7 microcontroller.
> + *
> + * Copyright (c) 2015 Serge Vakulenko
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/* Only 32-bit little endian mode supported. */
> +#include "config.h"
> +#if !defined TARGET_MIPS64 && !defined TARGET_WORDS_BIGENDIAN

Please don't use C preprocessor directive for conditional compilation of the 
whole file.
Use Makefile instead. See CONFIG_FULONG for example (fulong2e is mips64le-only).


-- 
Best regards,
  Antony Pavlov



reply via email to

[Prev in Thread] Current Thread [Next in Thread]