[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] pcie: Set the "link active" in the link status regi
From: |
Benjamin Herrenschmidt |
Subject: |
[Qemu-devel] [PATCH] pcie: Set the "link active" in the link status register |
Date: |
Sun, 05 Jul 2015 09:26:03 +1000 |
Some firmwares can test that and assume the device hasn't come
up if that bit isn't set
Signed-off-by: Benjamin Herrenschmidt <address@hidden>
---
hw/pci/pcie.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 14c7711..8bb166b 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -78,7 +78,7 @@ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t
type, uint8_t port)
PCI_EXP_LNK_LS_25);
pci_set_word(exp_cap + PCI_EXP_LNKSTA,
- PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25);
+ PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25 |PCI_EXP_LNKSTA_DLLLA );
pci_set_long(exp_cap + PCI_EXP_DEVCAP2,
PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP);
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH] pcie: Set the "link active" in the link status register,
Benjamin Herrenschmidt <=