[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 02/21] i.MX: Move serial initialization to i
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH v10 02/21] i.MX: Move serial initialization to init/realize of DeviceClass. |
Date: |
Sun, 5 Jul 2015 23:40:38 -0700 |
On Sun, Jul 5, 2015 at 5:04 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> Move constructor to DeviceClass methods
> * imx_serial_init
> * imx_serial_realize
>
> imx32_serial_properties is renamed to imx_serial_properties.
>
> The Qdev construction helper is moved to an include file as an
> inline function. This function is going to be removed soon.
>
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
> * not present on v1
>
> Changes since v2:
> * not present on v2
>
> Changes since v3:
> * not present on v3
>
> Changes since v4:
> * not present on v4
>
> Changes since v5:
> * not present on v5
>
> Changes since v6:
> * not present on v6
>
> Changes since v7:
> * not present on v7
>
> Changes since v8:
> * Remove Qdev construction helper
>
> Changes since v9:
> * Qdev construction helper is reintegrated and moved to a header file
> as an inline function.
>
> hw/char/imx_serial.c | 70
> +++++++++++++++-------------------------------------
> include/hw/arm/imx.h | 30 +++++++++++++++++++++-
> 2 files changed, 49 insertions(+), 51 deletions(-)
>
> diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
> index 1dcb325..ef5af05 100644
> --- a/hw/char/imx_serial.c
> +++ b/hw/char/imx_serial.c
> @@ -21,7 +21,6 @@
> #include "hw/char/imx_serial.h"
> #include "sysemu/sysemu.h"
> #include "sysemu/char.h"
> -#include "hw/arm/imx.h"
>
> //#define DEBUG_SERIAL 1
> #ifdef DEBUG_SERIAL
> @@ -38,13 +37,13 @@ do { printf("imx_serial: " fmt , ##args); } while (0)
> //#define DEBUG_IMPLEMENTATION 1
> #ifdef DEBUG_IMPLEMENTATION
> # define IPRINTF(fmt, args...) \
> - do { fprintf(stderr, "imx_serial: " fmt, ##args); } while (0)
> + do { fprintf(stderr, "%s: " fmt, TYPE_IMX_SERIAL, ##args); } while (0)
> #else
> # define IPRINTF(fmt, args...) do {} while (0)
> #endif
>
> static const VMStateDescription vmstate_imx_serial = {
> - .name = "imx-serial",
> + .name = TYPE_IMX_SERIAL,
> .version_id = 1,
> .minimum_version_id = 1,
> .fields = (VMStateField[]) {
> @@ -299,22 +298,18 @@ static void imx_event(void *opaque, int event)
> }
> }
>
> -
> static const struct MemoryRegionOps imx_serial_ops = {
> .read = imx_serial_read,
> .write = imx_serial_write,
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> -static int imx_serial_init(SysBusDevice *dev)
> +static void imx_serial_realize(DeviceState *dev, Error **errp)
> {
> IMXSerialState *s = IMX_SERIAL(dev);
>
> -
> - memory_region_init_io(&s->iomem, OBJECT(s), &imx_serial_ops, s,
> - "imx-serial", 0x1000);
> - sysbus_init_mmio(dev, &s->iomem);
> - sysbus_init_irq(dev, &s->irq);
> + /* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial()
> */
> + s->chr = qemu_char_get_next_serial();
>
> if (s->chr) {
> qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive,
> @@ -323,45 +318,20 @@ static int imx_serial_init(SysBusDevice *dev)
> DPRINTF("No char dev for uart at 0x%lx\n",
> (unsigned long)s->iomem.ram_addr);
> }
> -
> - return 0;
> }
>
> -void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq)
> +static void imx_serial_init(Object *obj)
> {
> - DeviceState *dev;
> - SysBusDevice *bus;
> - CharDriverState *chr;
> - const char chr_name[] = "serial";
> - char label[ARRAY_SIZE(chr_name) + 1];
> -
> - dev = qdev_create(NULL, TYPE_IMX_SERIAL);
> -
> - if (uart >= MAX_SERIAL_PORTS) {
> - hw_error("Cannot assign uart %d: QEMU supports only %d ports\n",
> - uart, MAX_SERIAL_PORTS);
> - }
> - chr = serial_hds[uart];
> - if (!chr) {
> - snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart);
> - chr = qemu_chr_new(label, "null", NULL);
> - if (!(chr)) {
> - hw_error("Can't assign serial port to imx-uart%d.\n", uart);
> - }
> - }
> -
> - qdev_prop_set_chr(dev, "chardev", chr);
I'm confused as to why you needed to replace the qdev_prop_set_chr
logic with qemu_get_char_get_next_serial(). Can you give some details
on why we want to do this?
> - bus = SYS_BUS_DEVICE(dev);
> - qdev_init_nofail(dev);
> - if (addr != (hwaddr)-1) {
> - sysbus_mmio_map(bus, 0, addr);
> - }
> - sysbus_connect_irq(bus, 0, irq);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> + IMXSerialState *s = IMX_SERIAL(obj);
>
> + memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s,
> + TYPE_IMX_SERIAL, 0x1000);
> + sysbus_init_mmio(sbd, &s->iomem);
> + sysbus_init_irq(sbd, &s->irq);
> }
>
> -
> -static Property imx32_serial_properties[] = {
> +static Property imx_serial_properties[] = {
> DEFINE_PROP_CHR("chardev", IMXSerialState, chr),
> DEFINE_PROP_END_OF_LIST(),
> };
> @@ -369,21 +339,21 @@ static Property imx32_serial_properties[] = {
> static void imx_serial_class_init(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> - SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
>
> - k->init = imx_serial_init;
> + dc->realize = imx_serial_realize;
> dc->vmsd = &vmstate_imx_serial;
> dc->reset = imx_serial_reset_at_boot;
> set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> dc->desc = "i.MX series UART";
> - dc->props = imx32_serial_properties;
> + dc->props = imx_serial_properties;
> }
>
> static const TypeInfo imx_serial_info = {
> - .name = TYPE_IMX_SERIAL,
> - .parent = TYPE_SYS_BUS_DEVICE,
> - .instance_size = sizeof(IMXSerialState),
> - .class_init = imx_serial_class_init,
> + .name = TYPE_IMX_SERIAL,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(IMXSerialState),
> + .instance_init = imx_serial_init,
> + .class_init = imx_serial_class_init,
> };
>
> static void imx_serial_register_types(void)
> diff --git a/include/hw/arm/imx.h b/include/hw/arm/imx.h
> index ea9e093..b861e80 100644
> --- a/include/hw/arm/imx.h
> +++ b/include/hw/arm/imx.h
> @@ -11,7 +11,34 @@
> #ifndef IMX_H
> #define IMX_H
>
> -void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq);
> +#include "hw/qdev-core.h"
> +#include "hw/sysbus.h"
> +#include "hw/char/imx_serial.h"
> +
> +/***
> + * This Qdev construction helper is going to be removed soon
> + */
> +static inline void imx_serial_create(int uart, const hwaddr addr, qemu_irq
> irq)
> +{
> + /* uart parameter is not used anymore */
> + DeviceState *dev;
> +
> + dev = qdev_create(NULL, TYPE_IMX_SERIAL);
> +
> + if (dev) {
> + SysBusDevice *bus;
> +
> + bus = SYS_BUS_DEVICE(dev);
> +
> + qdev_init_nofail(dev);
> +
> + if (addr != (hwaddr)-1) {
> + sysbus_mmio_map(bus, 0, addr);
> + }
> +
> + sysbus_connect_irq(bus, 0, irq);
> + }
> +}
Can you leave the implementation in imx_serial.c? I don't see the need
for moving it out. There is no reason the c file cannot have all of
_init _realize and _create.
Regards,
Peter
>
> typedef enum {
> NOCLK,
> @@ -31,4 +58,5 @@ void imx_timerg_create(const hwaddr addr,
> DeviceState *ccm);
>
>
> +
> #endif /* IMX_H */
> --
> 2.1.4
>
>
- [Qemu-devel] [PATCH v10 00/21] i.MX: Add i.MX25 support through the 3DS evaluation board., Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 04/21] i.MX: Split AVIC emulator in a header file and a source file, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 05/21] i.MX: Fix Coding style for AVIC emulator., Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 07/21] i.MX: Fix Coding style for CCM emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 06/21] i.MX: Split CCM emulator in a header file and a source file, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 08/21] i.MX: Split EPIT emulator in a header file and a source file, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 10/21] i.MX: Fix Coding style for EPIT emulator, Jean-Christophe Dubois, 2015/07/05
- [Qemu-devel] [PATCH v10 09/21] i.MX: Move Qdev EPIT construction helper as inline function., Jean-Christophe Dubois, 2015/07/05