[Qemu-devel] [PULL 1/1] qxl: allow to specify head limit to qxl driver

[Gerd Hoffmann]

From: Frediano Ziglio <address@hidden>

This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.

libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).

Signed-off-by: Frediano Ziglio <address@hidden>
Signed-off-by: Gerd Hoffmann <address@hidden>
---
 hw/display/qxl.c | 26 +++++++++++++++++++++-----
 hw/display/qxl.h |  3 +++
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/hw/display/qxl.c b/hw/display/qxl.c
index f87a5ee..4e5ff69 100644
--- a/hw/display/qxl.c
+++ b/hw/display/qxl.c
@@ -271,6 +271,12 @@ static void qxl_spice_monitors_config_async(PCIQXLDevice 
*qxl, int replay)
                     QXL_COOKIE_TYPE_POST_LOAD_MONITORS_CONFIG,
                     0));
     } else {
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+        if (qxl->max_outputs) {
+            spice_qxl_set_monitors_config_limit(&qxl->ssd.qxl,
+                                                qxl->max_outputs);
+        }
+#endif
         qxl->guest_monitors_config = qxl->ram->monitors_config;
         spice_qxl_monitors_config_async(&qxl->ssd.qxl,
                 qxl->ram->monitors_config,
@@ -991,6 +997,7 @@ static int interface_client_monitors_config(QXLInstance 
*sin,
     PCIQXLDevice *qxl = container_of(sin, PCIQXLDevice, ssd.qxl);
     QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
     int i;
+    unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
 
     if (qxl->revision < 4) {
         trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
@@ -1013,17 +1020,23 @@ static int interface_client_monitors_config(QXLInstance 
*sin,
     if (!monitors_config) {
         return 1;
     }
+
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+    /* limit number of outputs based on setting limit */
+    if (qxl->max_outputs && qxl->max_outputs <= max_outputs) {
+        max_outputs = qxl->max_outputs;
+    }
+#endif
+
     memset(&rom->client_monitors_config, 0,
            sizeof(rom->client_monitors_config));
     rom->client_monitors_config.count = monitors_config->num_of_monitors;
     /* monitors_config->flags ignored */
-    if (rom->client_monitors_config.count >=
-            ARRAY_SIZE(rom->client_monitors_config.heads)) {
+    if (rom->client_monitors_config.count >= max_outputs) {
         trace_qxl_client_monitors_config_capped(qxl->id,
                                 monitors_config->num_of_monitors,
-                                ARRAY_SIZE(rom->client_monitors_config.heads));
-        rom->client_monitors_config.count =
-            ARRAY_SIZE(rom->client_monitors_config.heads);
+                                max_outputs);
+        rom->client_monitors_config.count = max_outputs;
     }
     for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
         VDAgentMonConfig *monitor = &monitors_config->monitors[i];
@@ -2274,6 +2287,9 @@ static Property qxl_properties[] = {
         DEFINE_PROP_UINT32("vram64_size_mb", PCIQXLDevice, vram_size_mb, -1),
         DEFINE_PROP_UINT32("vgamem_mb", PCIQXLDevice, vgamem_size_mb, 16),
         DEFINE_PROP_INT32("surfaces", PCIQXLDevice, ssd.num_surfaces, 1024),
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+        DEFINE_PROP_UINT16("max_outputs", PCIQXLDevice, max_outputs, 0),
+#endif
         DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/display/qxl.h b/hw/display/qxl.h
index deddd54..2ddf065 100644
--- a/hw/display/qxl.h
+++ b/hw/display/qxl.h
@@ -99,6 +99,9 @@ typedef struct PCIQXLDevice {
     QXLModes           *modes;
     uint32_t           rom_size;
     MemoryRegion       rom_bar;
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+    uint16_t           max_outputs;
+#endif
 
     /* vram pci bar */
     uint32_t           vram_size;
-- 
1.8.3.1