[Qemu-devel] [PATCH] configure: factor out adding disas configure

[Peter Crosthwaite]

Every arch adds its disas configury to both its own config as well
config_disas_all. Make a small function do to both at once.

Signed-off-by: Peter Crosthwaite <address@hidden>
---
Prepares support for multi-arch where the disas configury for
multi-arch will also need to be added where 3 more LOC are added
for each DISAS configury.
---
 configure | 65 ++++++++++++++++++++++++---------------------------------------
 1 file changed, 25 insertions(+), 40 deletions(-)

diff --git a/configure b/configure
index cc0338d..096977b 100755
--- a/configure
+++ b/configure
@@ -5466,91 +5466,76 @@ fi
 cflags=""
 ldflags=""
 
+disas_config() {
+  echo "$@" >> $config_target_mak
+  echo "$@" >> config-all-disas.mak
+}
+
 for i in $ARCH $TARGET_BASE_ARCH ; do
   case "$i" in
   alpha)
-    echo "CONFIG_ALPHA_DIS=y"  >> $config_target_mak
-    echo "CONFIG_ALPHA_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_ALPHA_DIS=y"
   ;;
   aarch64)
     if test -n "${cxx}"; then
-      echo "CONFIG_ARM_A64_DIS=y"  >> $config_target_mak
-      echo "CONFIG_ARM_A64_DIS=y"  >> config-all-disas.mak
+      disas_config "CONFIG_ARM_A64_DIS=y"
     fi
   ;;
   arm)
-    echo "CONFIG_ARM_DIS=y"  >> $config_target_mak
-    echo "CONFIG_ARM_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_ARM_DIS=y"
     if test -n "${cxx}"; then
-      echo "CONFIG_ARM_A64_DIS=y"  >> $config_target_mak
-      echo "CONFIG_ARM_A64_DIS=y"  >> config-all-disas.mak
+      disas_config "CONFIG_ARM_A64_DIS=y"
     fi
   ;;
   cris)
-    echo "CONFIG_CRIS_DIS=y"  >> $config_target_mak
-    echo "CONFIG_CRIS_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_CRIS_DIS=y"
   ;;
   hppa)
-    echo "CONFIG_HPPA_DIS=y"  >> $config_target_mak
-    echo "CONFIG_HPPA_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_HPPA_DIS=y"
   ;;
   i386|x86_64|x32)
-    echo "CONFIG_I386_DIS=y"  >> $config_target_mak
-    echo "CONFIG_I386_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_I386_DIS=y"
   ;;
   ia64*)
-    echo "CONFIG_IA64_DIS=y"  >> $config_target_mak
-    echo "CONFIG_IA64_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_IA64_DIS=y"
   ;;
   lm32)
-    echo "CONFIG_LM32_DIS=y"  >> $config_target_mak
-    echo "CONFIG_LM32_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_LM32_DIS=y"
   ;;
   m68k)
-    echo "CONFIG_M68K_DIS=y"  >> $config_target_mak
-    echo "CONFIG_M68K_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_M68K_DIS=y"
   ;;
   microblaze*)
-    echo "CONFIG_MICROBLAZE_DIS=y"  >> $config_target_mak
-    echo "CONFIG_MICROBLAZE_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_MICROBLAZE_DIS=y"
   ;;
   mips*)
-    echo "CONFIG_MIPS_DIS=y"  >> $config_target_mak
-    echo "CONFIG_MIPS_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_MIPS_DIS=y"
   ;;
   moxie*)
-    echo "CONFIG_MOXIE_DIS=y"  >> $config_target_mak
-    echo "CONFIG_MOXIE_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_MOXIE_DIS=y"
   ;;
   or32)
-    echo "CONFIG_OPENRISC_DIS=y"  >> $config_target_mak
-    echo "CONFIG_OPENRISC_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_OPENRISC_DIS=y"
   ;;
   ppc*)
-    echo "CONFIG_PPC_DIS=y"  >> $config_target_mak
-    echo "CONFIG_PPC_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_PPC_DIS=y"
   ;;
   s390*)
-    echo "CONFIG_S390_DIS=y"  >> $config_target_mak
-    echo "CONFIG_S390_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_S390_DIS=y"
   ;;
   sh4)
-    echo "CONFIG_SH4_DIS=y"  >> $config_target_mak
-    echo "CONFIG_SH4_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_SH4_DIS=y"
   ;;
   sparc*)
-    echo "CONFIG_SPARC_DIS=y"  >> $config_target_mak
-    echo "CONFIG_SPARC_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_SPARC_DIS=y"
   ;;
   xtensa*)
-    echo "CONFIG_XTENSA_DIS=y"  >> $config_target_mak
-    echo "CONFIG_XTENSA_DIS=y"  >> config-all-disas.mak
+    disas_config "CONFIG_XTENSA_DIS=y"
   ;;
   esac
 done
 if test "$tcg_interpreter" = "yes" ; then
-  echo "CONFIG_TCI_DIS=y"  >> $config_target_mak
-  echo "CONFIG_TCI_DIS=y"  >> config-all-disas.mak
+  disas_config "CONFIG_TCI_DIS=y"
 fi
 
 case "$ARCH" in
-- 
1.9.1