If you do decide to give tutorials and emulate power pc components to a point where you can just install macintosh via qemu
just need documentation on starting scrips like memory options kernel flags
how to setup a virtualmachine for use
mkdir ~/qemu_vms/
Download/copy Raspbian Wheezy to ~/qemu_vms/
Download kernel-qemu to ~/qemu_vms/
$ sudo apt-get install qemu-system
$ file ~/qemu_vms/2013-02-09-wheezy-raspbian.img
From
the output of the file command, take the partition 2 'startsector'
value an multiply by 512, and use this figure as the offset value in the
mount command below.
$ sudo mount ~/qemu_vms/2013-02-09-wheezy-raspbian.img -o offset=62914560 /mnt
$ sudo nano /mnt/etc/ld.so.preload
Comment out the line in the file (use a # as the first character of the line) and save the file (CTRL+X, then "Y" for yes).
$ sudo umount ~/qemu_vms/2013-02-09-wheezy-raspbian.img /mnt
$ cd ~/qemu_vms/
$
qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb
-no-reboot -serial stdio -append "root=/dev/sda2 panic=1" -hda
~/qemu_vms/2013-02-09-wheezy-raspbian.img -redir tcp:5022::22
Qemu gives you a root shell, run:
$ fsck /dev/sda2
$ shutdown -r now
Login as pi
Password raspberry
tell the end user what all of this does and why they need to do it. it is important because it helps with development and useage for the average user.