|
From: | Naman Govil |
Subject: | [Qemu-devel] qemu-system-aarch64 error while booting kernel |
Date: | Tue, 21 Jul 2015 23:48:09 -0400 |
Hi,
For debugging purposes, I tried to get qemu monitor working first. I was able to get qemu monitor working to print onto my terminal (stdio)
This gave me then following :
qemu: fatal: Trying to execute code outside RAM or ROM at 0x0000000008000000
R00=00000950 R01=ffffffff R02=44000000 R03=00000000
R04=00000000 R05=00000000 R06=00000000 R07=00000000
R08=00000000 R09=00000000 R10=00000000 R11=00000000
R12=00000000 R13=00000000 R14=40010010 R15=08000000
PSR=400001db -Z-- A und32
s00=00000000 s01=00000000 d00=0000000000000000
s02=00000000 s03=00000000 d01=0000000000000000
s04=00000000 s05=00000000 d02=0000000000000000
s06=00000000 s07=00000000 d03=0000000000000000
s08=00000000 s09=00000000 d04=0000000000000000
s10=00000000 s11=00000000 d05=0000000000000000
s12=00000000 s13=00000000 d06=0000000000000000
s14=00000000 s15=00000000 d07=0000000000000000
s16=00000000 s17=00000000 d08=0000000000000000
s18=00000000 s19=00000000 d09=0000000000000000
s20=00000000 s21=00000000 d10=0000000000000000
s22=00000000 s23=00000000 d11=0000000000000000
s24=00000000 s25=00000000 d12=0000000000000000
s26=00000000 s27=00000000 d13=0000000000000000
s28=00000000 s29=00000000 d14=0000000000000000
s30=00000000 s31=00000000 d15=0000000000000000
s32=00000000 s33=00000000 d16=0000000000000000
s34=00000000 s35=00000000 d17=0000000000000000
s36=00000000 s37=00000000 d18=0000000000000000
s38=00000000 s39=00000000 d19=0000000000000000
s40=000000 Abort trap: 6
I did some searching, this meant that the bootloader cannot be loaded. And realised maybe the ROM qemu is getting is not sufficient. The 'execute outside ram or rom' is usually a jump to somewhere that qemu does not recognize as ROM/RAM.
In coreboot, Since we expect
CONFIG_BOOTBLOCK_BASE is 0x10000
CONFIG_ROMSTAGE_BASE is 0x20000
CONFIG_SYS_SDRAM_BASE is 0x1000000
i.e ROM to start at 64k. So I ran qemu by giving a -m 2048M (for testing) and got something. A window popped out (qemu), I am unsure as to what this is. I am attaching the picture with this mail.
1. What is this window? Is this just a serial monitor? If so, why does it pop out on doing just $qemu-system-aarch64 -machine type=virt -m 2048M-nographic -kernel ~/coreboot/build/coreboot.rom ?
2. Also, I checked for the supported mainboard for qemu-system-aarch64 (http://pastebin.com/m03XmUHU) So I guess we can run with virt. Do I need to add a cpu?
[Prev in Thread] | Current Thread | [Next in Thread] |