Re: [Qemu-devel] [PATCH v2 12/12] qga: start a man page

[Michael Roth]

Quoting address@hidden (2015-08-25 17:10:24)
> From: Marc-André Lureau <address@hidden>
> 
> Add a simple man page for the qemu agent.
> 
> Signed-off-by: Marc-André Lureau <address@hidden>

Reviewed-by: Michael Roth <address@hidden>

> ---
>  Makefile      |  14 +++++-
>  qemu-doc.texi |   6 +++
>  qemu-ga.texi  | 136 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 154 insertions(+), 2 deletions(-)
>  create mode 100644 qemu-ga.texi
> 
> diff --git a/Makefile b/Makefile
> index 340d9c8..67d44b8 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -88,7 +88,8 @@ LIBS+=-lz $(LIBS_TOOLS)
>  HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)
> 
>  ifdef BUILD_DOCS
> -DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 
> qmp-commands.txt
> +DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
> +DOCS+=qmp-commands.txt
>  ifdef CONFIG_LINUX
>  DOCS+=kvm_stat.1
>  endif
> @@ -400,6 +401,9 @@ ifneq ($(TOOLS),)
>         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
>         $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
>  endif
> +ifneq (,$(findstring qemu-ga,$(TOOLS)))
> +       $(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
> +endif
>  endif
>  ifdef CONFIG_VIRTFS
>         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
> @@ -538,6 +542,12 @@ qemu-nbd.8: qemu-nbd.texi
>           $(POD2MAN) --section=8 --center=" " --release=" " qemu-nbd.pod > 
> $@, \
>           "  GEN   $@")
> 
> +qemu-ga.8: qemu-ga.texi
> +       $(call quiet-command, \
> +         perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-ga.pod && \
> +         $(POD2MAN) --section=8 --center=" " --release=" " qemu-ga.pod > $@, 
> \
> +         "  GEN   $@")
> +
>  kvm_stat.1: scripts/kvm/kvm_stat.texi
>         $(call quiet-command, \
>           perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< kvm_stat.pod && \
> @@ -551,7 +561,7 @@ pdf: qemu-doc.pdf qemu-tech.pdf
> 
>  qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
>         qemu-img.texi qemu-nbd.texi qemu-options.texi \
> -       qemu-monitor.texi qemu-img-cmds.texi
> +       qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi
> 
>  ifdef CONFIG_WIN32
> 
> diff --git a/qemu-doc.texi b/qemu-doc.texi
> index 94af8c0..84d17d1 100644
> --- a/qemu-doc.texi
> +++ b/qemu-doc.texi
> @@ -412,6 +412,7 @@ snapshots.
>  * vm_snapshots::              VM snapshots
>  * qemu_img_invocation::       qemu-img Invocation
>  * qemu_nbd_invocation::       qemu-nbd Invocation
> +* qemu_ga_invocation::        qemu-ga Invocation
>  * disk_images_formats::       Disk image file formats
>  * host_drives::               Using host drives
>  * disk_images_fat_images::    Virtual FAT disk images
> @@ -505,6 +506,11 @@ state is not saved or restored properly (in particular 
> USB).
> 
>  @include qemu-nbd.texi
> 
> address@hidden qemu_ga_invocation
> address@hidden @code{qemu-ga} Invocation
> +
> address@hidden qemu-ga.texi
> +
>  @node disk_images_formats
>  @subsection Disk image file formats
> 
> diff --git a/qemu-ga.texi b/qemu-ga.texi
> new file mode 100644
> index 0000000..7d4a628
> --- /dev/null
> +++ b/qemu-ga.texi
> @@ -0,0 +1,136 @@
> address@hidden
> address@hidden man begin SYNOPSIS
> +usage: qemu-ga [-m <method> -p <path>] [OPTION]...
> address@hidden man end
> address@hidden example
> +
> address@hidden man begin DESCRIPTION
> +
> +The QEMU Guest Agent is a deamon that allows the host to perform
> +various operations in the guest, such as:
> +
> address@hidden
> address@hidden
> +get information from the guest
> address@hidden
> +set the guest's system time
> address@hidden
> +read/write a file
> address@hidden
> +sync and freeze the filesystems
> address@hidden
> +suspend the guest
> address@hidden
> +reconfigure guest local processors
> address@hidden
> +set user's password
> address@hidden
> +...
> address@hidden itemize
> +
> +qemu-ga will read a system configuration file on startup (located at
> address@hidden/etc/qemu/qemu-ga.conf} by default), then parse remaining
> +configuration options on the command line. For the same key, the last
> +option wins, but the lists accumulate (see below for configuration
> +file format).
> +
> address@hidden man end
> +
> address@hidden man begin OPTIONS
> address@hidden @option
> address@hidden -m, address@hidden
> +  Transport method: one of @samp{unix-listen}, @samp{virtio-serial}, or
> +  @samp{isa-serial} (@samp{virtio-serial} is the default).
> +
> address@hidden -p, address@hidden
> +  Device/socket path (the default for virtio-serial is:
> +  @samp{/dev/virtio-ports/org.qemu.guest_agent.0},
> +  the default for isa-serial is: @samp{/dev/ttyS0})
> +
> address@hidden -l, address@hidden
> +  Set log file path, logs to stderr by default.
> +
> address@hidden -f, address@hidden
> +  Specify pid file (default is @samp{/var/run/qemu-ga.pid}).
> +
> address@hidden -F, address@hidden
> +  Enable fsfreeze hook. Accepts an optional argument that specifies
> +  script to run on freeze/thaw. Script will be called with
> +  'freeze'/'thaw' arguments accordingly.  (default is
> +  @samp{/etc/qemu/fsfreeze-hook}) If using -F with an argument, do
> +  not follow -F with a space. (for example:
> +  @samp{-F/var/run/fsfreezehook.sh})
> +
> address@hidden -t, address@hidden
> +  Specify the directory to store state information (absolute paths only,
> +  default is @samp{/var/run}).
> +
> address@hidden -v, --verbose
> +  Log extra debugging information.
> +
> address@hidden -V, --version
> +  Print version information and exit.
> +
> address@hidden -d, --daemon
> +  Daemonize after startup (detach from terminal).
> +
> address@hidden -b, address@hidden
> +  Comma-separated list of RPCs to disable (no spaces, @samp{?} to list
> +  available RPCs).
> +
> address@hidden -D, --dump-conf
> +  Dump the configuration in a format compatible with @file{qemu-ga.conf}
> +  and exit.
> +
> address@hidden -h, --help
> +  Display this help and exit.
> address@hidden table
> +
> address@hidden man end
> +
> address@hidden man begin FILES
> +
> +The syntax of the @file{qemu-ga.conf} configuration file follows the
> +Desktop Entry Specification, here is a quick summary: it consists of
> +groups of key-value pairs, interspersed with comments.
> +
> address@hidden
> +# qemu-ga configuration sample
> +[general]
> +daemonize = 0
> +pidfile = /var/run/qemu-ga.pid
> +verbose = 0
> +method = virtio-serial
> +path = /dev/virtio-ports/org.qemu.guest_agent.0
> +statedir = /var/run
> address@hidden example
> +
> +The list of keys follows the command line options:
> address@hidden @option
> address@hidden daemon= boolean
> address@hidden method= string
> address@hidden path= string
> address@hidden logfile= string
> address@hidden pidfile= string
> address@hidden fsfreeze-hook= string
> address@hidden statedir= string
> address@hidden verbose= boolean
> address@hidden blacklist= string list
> address@hidden table
> +
> address@hidden man end
> +
> address@hidden
> +
> address@hidden qemu-ga
> address@hidden QEMU Guest Agent
> +
> address@hidden man begin AUTHOR
> +Michael Roth <address@hidden>
> address@hidden man end
> +
> address@hidden man begin SEEALSO
> +qemu(1)
> address@hidden man end
> +
> address@hidden ignore
> -- 
> 2.4.3
>