qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 0/6] ARM: enable TZ in the GIC


From: Peter Maydell
Subject: [Qemu-devel] [PATCH v3 0/6] ARM: enable TZ in the GIC
Date: Fri, 4 Sep 2015 17:22:56 +0100

This patchset enables the TZ support in the GIC for the systems
where we enable TZ support in the CPU. In practice that means
just the "virt" and "vexpress" boards, since all the others
disable the CPU TZ support.

There are no changes since v3, I've just rebased this all on
top of current target-arm.next (which will be in master early
next week as I've just sent out the pullreq).

These have already been reviewed by Peter C, but when I spoke
to Edgar at KVM Forum he said he hadn't been able to sort out
which tree these would apply to, so I figured I'd better resend
them so there's a chance for further review/testing if desired.

thanks
-- PMM

Changes since v2:
 * rebased onto target-arm.next
Changes since v1:
 * New patch which switches the default for the 'virt' board from
   "enable TZ" to "disable TZ". The UEFI blob can't handle TZ being
   fully enabled, so I had a choice of breaking it or breaking code
   which assumes TZ. As far as I know only the TZ test suite falls
   in the latter category. -machine secure=on will give you the
   old behaviour back.
 * rather than the property on the GIC, we take the approach Peter C
   suggested of defining an interface for devices to implement if
   they need to do firmware-equivalent setup. The API is a little
   different from Peter C's RFC patch, but the principle is the same.



Peter Crosthwaite (1):
  qom: Add recursive version of object_child_for_each

Peter Maydell (5):
  hw/arm: new interface for devices which need to behave differently for
    kernel boot
  hw/intc/arm_gic_common: Configure IRQs as NS if doing direct NS kernel
    boot
  hw/cpu/{a15mpcore,a9mpcore}: enable TrustZone in GIC if it is enabled
    in CPUs
  hw/arm/virt: Default to not providing TrustZone support
  hw/arm/virt: Enable TZ extensions on the GIC if we are using them

 hw/arm/boot.c                    | 34 +++++++++++++++++++++++++++
 hw/arm/virt.c                    | 14 +++++++----
 hw/cpu/a15mpcore.c               | 13 ++++++++++
 hw/cpu/a9mpcore.c                | 11 +++++++++
 hw/intc/arm_gic_common.c         | 51 +++++++++++++++++++++++++++++++++++++---
 include/hw/arm/linux-boot-if.h   | 43 +++++++++++++++++++++++++++++++++
 include/hw/intc/arm_gic_common.h |  1 +
 include/qom/object.h             | 15 ++++++++++++
 qom/object.c                     | 25 +++++++++++++++++---
 9 files changed, 197 insertions(+), 10 deletions(-)
 create mode 100644 include/hw/arm/linux-boot-if.h

-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]