Re: [Qemu-devel] [PATCH v2] configure: factor out adding disas configure

[Peter Crosthwaite]

Ping!

On Sat, Aug 29, 2015 at 3:33 AM, Peter Crosthwaite
<address@hidden> wrote:
> Every arch adds its disas configury to both its own config as well
> config_disas_all. Make a small function do to both at once.
>
> Signed-off-by: Peter Crosthwaite <address@hidden>
> ---
> Changed since v1:
> Factor out everything except just the arch name.
>
> Prepares support for multi-arch where the disas configury for
> multi-arch will also need to be added where 3 more LOC are added
> for each DISAS configury.
> ---
>  configure | 65 
> ++++++++++++++++++++++++---------------------------------------
>  1 file changed, 25 insertions(+), 40 deletions(-)
>
> diff --git a/configure b/configure
> index 9d24d59..34e49b4 100755
> --- a/configure
> +++ b/configure
> @@ -5483,91 +5483,76 @@ fi
>  cflags=""
>  ldflags=""
>
> +disas_config() {
> +  echo "CONFIG_${1}_DIS=y" >> $config_target_mak
> +  echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
> +}
> +
>  for i in $ARCH $TARGET_BASE_ARCH ; do
>    case "$i" in
>    alpha)
> -    echo "CONFIG_ALPHA_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_ALPHA_DIS=y"  >> config-all-disas.mak
> +    disas_config "ALPHA"
>    ;;
>    aarch64)
>      if test -n "${cxx}"; then
> -      echo "CONFIG_ARM_A64_DIS=y"  >> $config_target_mak
> -      echo "CONFIG_ARM_A64_DIS=y"  >> config-all-disas.mak
> +      disas_config "ARM_A64"
>      fi
>    ;;
>    arm)
> -    echo "CONFIG_ARM_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_ARM_DIS=y"  >> config-all-disas.mak
> +    disas_config "ARM"
>      if test -n "${cxx}"; then
> -      echo "CONFIG_ARM_A64_DIS=y"  >> $config_target_mak
> -      echo "CONFIG_ARM_A64_DIS=y"  >> config-all-disas.mak
> +      disas_config "ARM_A64"
>      fi
>    ;;
>    cris)
> -    echo "CONFIG_CRIS_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_CRIS_DIS=y"  >> config-all-disas.mak
> +    disas_config "CRIS"
>    ;;
>    hppa)
> -    echo "CONFIG_HPPA_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_HPPA_DIS=y"  >> config-all-disas.mak
> +    disas_config "HPPA"
>    ;;
>    i386|x86_64|x32)
> -    echo "CONFIG_I386_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_I386_DIS=y"  >> config-all-disas.mak
> +    disas_config "I386"
>    ;;
>    ia64*)
> -    echo "CONFIG_IA64_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_IA64_DIS=y"  >> config-all-disas.mak
> +    disas_config "IA64"
>    ;;
>    lm32)
> -    echo "CONFIG_LM32_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_LM32_DIS=y"  >> config-all-disas.mak
> +    disas_config "LM32"
>    ;;
>    m68k)
> -    echo "CONFIG_M68K_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_M68K_DIS=y"  >> config-all-disas.mak
> +    disas_config "M68K"
>    ;;
>    microblaze*)
> -    echo "CONFIG_MICROBLAZE_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_MICROBLAZE_DIS=y"  >> config-all-disas.mak
> +    disas_config "MICROBLAZE"
>    ;;
>    mips*)
> -    echo "CONFIG_MIPS_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_MIPS_DIS=y"  >> config-all-disas.mak
> +    disas_config "MIPS"
>    ;;
>    moxie*)
> -    echo "CONFIG_MOXIE_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_MOXIE_DIS=y"  >> config-all-disas.mak
> +    disas_config "MOXIE"
>    ;;
>    or32)
> -    echo "CONFIG_OPENRISC_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_OPENRISC_DIS=y"  >> config-all-disas.mak
> +    disas_config "OPENRISC"
>    ;;
>    ppc*)
> -    echo "CONFIG_PPC_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_PPC_DIS=y"  >> config-all-disas.mak
> +    disas_config "PPC"
>    ;;
>    s390*)
> -    echo "CONFIG_S390_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_S390_DIS=y"  >> config-all-disas.mak
> +    disas_config "S390"
>    ;;
>    sh4)
> -    echo "CONFIG_SH4_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_SH4_DIS=y"  >> config-all-disas.mak
> +    disas_config "SH4"
>    ;;
>    sparc*)
> -    echo "CONFIG_SPARC_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_SPARC_DIS=y"  >> config-all-disas.mak
> +    disas_config "SPARC"
>    ;;
>    xtensa*)
> -    echo "CONFIG_XTENSA_DIS=y"  >> $config_target_mak
> -    echo "CONFIG_XTENSA_DIS=y"  >> config-all-disas.mak
> +    disas_config "XTENSA"
>    ;;
>    esac
>  done
>  if test "$tcg_interpreter" = "yes" ; then
> -  echo "CONFIG_TCI_DIS=y"  >> $config_target_mak
> -  echo "CONFIG_TCI_DIS=y"  >> config-all-disas.mak
> +  disas_config "TCI"
>  fi
>
>  case "$ARCH" in
> --
> 1.9.1
>