[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 2/3] pci: Update pci_regs header
From: |
Knut Omang |
Subject: |
Re: [Qemu-devel] [PATCH v3 2/3] pci: Update pci_regs header |
Date: |
Sat, 12 Sep 2015 14:20:11 +0200 |
On Thu, 2015-09-10 at 22:27 +0200, Knut Omang wrote:
> On Thu, 2015-09-10 at 21:11 +0300, Michael S. Tsirkin wrote:
> > On Tue, Sep 01, 2015 at 05:59:49PM +0200, Knut Omang wrote:
> > > Pull new version from kernel v4.1
> >
> > Paolo sent what I consider a better version.
So looking at the details of the differences between the kernel and
qemu's version, I agree that Paolo's version are better, however there
were also a few cases where the consistency of naming and quality of
comments had improved on the kernel side.
> > Can you send just the patch removing duplicate symbols?
I have now hand merged what I considered improvements
in the kernel version, will post a new version of the patch set
shortly.
Knut
>
> Ok, I think I just misunderstood your intentions
> - I thought you wanted to eventually arrive at "sharing"
> the code with the kernel to simplify future updates,
> so I "helped" you with the last bit of work :-)
>
> > > msi: Removed local definitions now in pci_regs.h
> > > Adds definitions necessary to support emulated SR/IOV.
> > >
> > > Replace usage of PCI_MSIX_FLAGS_BIRMASK with PCI_MSIX_TABLE_BIR
> > > to keep in sync with the kernel for future updates.
> >
> > I fixed kernel to keep the old name around.
>
> Yes, I noticed just after I had submitted the patch set.
> I can rebase the patch set using a minimal patch for this one,
>
> Knut
>
> > > Replaced PCI_ERR_UNC_UND with _TRAIN for bit 0x00000001
> > > from the kernel header to support aer code.
> > > Should probably be suggested as an upstream kernel fix.
> >
> > Do we really need to generate these errors?
> > They were only present on old 1.0 hardware.
> >
> >
> > >
> > > Signed-off-by: Knut Omang <address@hidden>
> > > ---
> > > hw/i386/kvm/pci-assign.c | 4 +-
> > > hw/pci/msix.c | 2 +-
> > > hw/vfio/pci.c | 9 +-
> > > include/standard-headers/linux/pci_regs.h | 380
> > > ++++++++++++++++++++++--------
> > > 4 files changed, 291 insertions(+), 104 deletions(-)
> > >
> > > diff --git a/hw/i386/kvm/pci-assign.c b/hw/i386/kvm/pci-assign.c
> > > index 74d22f4..36b66ea 100644
> > > --- a/hw/i386/kvm/pci-assign.c
> > > +++ b/hw/i386/kvm/pci-assign.c
> > > @@ -1320,8 +1320,8 @@ static int
> > > assigned_device_pci_cap_init(PCIDevice *pci_dev, Error **errp)
> > > PCI_MSIX_FLAGS_ENABLE |
> > > PCI_MSIX_FLAGS_MASKALL);
> > >
> > > msix_table_entry = pci_get_long(pci_dev->config + pos +
> > > PCI_MSIX_TABLE);
> > > - bar_nr = msix_table_entry & PCI_MSIX_FLAGS_BIRMASK;
> > > - msix_table_entry &= ~PCI_MSIX_FLAGS_BIRMASK;
> > > + bar_nr = msix_table_entry & PCI_MSIX_TABLE_BIR;
> > > + msix_table_entry &= ~PCI_MSIX_TABLE_BIR;
> > > dev->msix_table_addr = pci_region[bar_nr].base_addr +
> > > msix_table_entry;
> > > dev->msix_max = msix_max;
> > > }
> > > diff --git a/hw/pci/msix.c b/hw/pci/msix.c
> > > index 7716bf3..2788be2 100644
> > > --- a/hw/pci/msix.c
> > > +++ b/hw/pci/msix.c
> > > @@ -250,7 +250,7 @@ int msix_init(struct PCIDevice *dev, unsigned
> > > short nentries,
> > > ranges_overlap(table_offset, table_size, pba_offset,
> > > pba_size)) ||
> > > table_offset + table_size >
> > > memory_region_size(table_bar)
> > > > >
> > > pba_offset + pba_size > memory_region_size(pba_bar) ||
> > > - (table_offset | pba_offset) & PCI_MSIX_FLAGS_BIRMASK) {
> > > + (table_offset | pba_offset) & PCI_MSIX_TABLE_BIR) {
> > > return -EINVAL;
> > > }
> > >
> > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > index 4023d8e..b940df6 100644
> > > --- a/hw/vfio/pci.c
> > > +++ b/hw/vfio/pci.c
> > > @@ -2244,10 +2244,10 @@ static int
> > > vfio_early_setup_msix(VFIOPCIDevice *vdev)
> > > pba = le32_to_cpu(pba);
> > >
> > > vdev->msix = g_malloc0(sizeof(*(vdev->msix)));
> > > - vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK;
> > > - vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK;
> > > - vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK;
> > > - vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK;
> > > + vdev->msix->table_bar = table & PCI_MSIX_TABLE_BIR;
> > > + vdev->msix->table_offset = table & ~PCI_MSIX_TABLE_BIR;
> > > + vdev->msix->pba_bar = pba & PCI_MSIX_TABLE_BIR;
> > > + vdev->msix->pba_offset = pba & ~PCI_MSIX_TABLE_BIR;
> > > vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1;
> > >
> > > /*
> > > @@ -2281,7 +2281,6 @@ static int
> > > vfio_early_setup_msix(VFIOPCIDevice *vdev)
> > > vdev->msix->table_bar,
> > > vdev->msix->table_offset,
> > > vdev->msix->entries);
> > > -
> > > return 0;
> > > }
> > >
> > > diff --git a/include/standard-headers/linux/pci_regs.h
> > > b/include/standard-headers/linux/pci_regs.h
> > > index 57e8c80..4414a81 100644
> > > --- a/include/standard-headers/linux/pci_regs.h
> > > +++ b/include/standard-headers/linux/pci_regs.h
> > > @@ -13,10 +13,10 @@
> > > * PCI to PCI Bridge Specification
> > > * PCI System Design Guide
> > > *
> > > - * For hypertransport information, please consult the
> > > following manuals
> > > - * from http://www.hypertransport.org
> > > + * For HyperTransport information, please consult the
> > > following manuals
> > > + * from http://www.hypertransport.org
> > > *
> > > - * The Hypertransport I/O Link Specification
> > > + * The HyperTransport I/O Link Specification
> > > */
> > >
> > > #ifndef LINUX_PCI_REGS_H
> > > @@ -26,6 +26,7 @@
> > > * Under PCI, each device has 256 bytes of configuration address
> > > space,
> > > * of which the first 64 bytes are standardized as follows:
> > > */
> > > +#define PCI_STD_HEADER_SIZEOF 64
> > > #define PCI_VENDOR_ID 0x00 /* 16 bits */
> > > #define PCI_DEVICE_ID 0x02 /* 16 bits */
> > > #define PCI_COMMAND 0x04 /* 16 bits */
> > > @@ -36,7 +37,7 @@
> > > #define PCI_COMMAND_INVALIDATE 0x10 /* Use memory
> > > write and invalidate */
> > > #define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette
> > > snooping */
> > > #define PCI_COMMAND_PARITY 0x40 /* Enable parity
> > > checking */
> > > -#define PCI_COMMAND_WAIT 0x80 /* Enable
> > > address/data stepping */
> > > +#define PCI_COMMAND_WAIT 0x80 /* Enable
> > > address/data stepping */
> > > #define PCI_COMMAND_SERR 0x100 /* Enable SERR */
> > > #define PCI_COMMAND_FAST_BACK 0x200 /* Enable
> > > back
> > > -to-back writes */
> > > #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation
> > > Disable
> > > */
> > > @@ -44,7 +45,7 @@
> > > #define PCI_STATUS 0x06 /* 16 bits */
> > > #define PCI_STATUS_INTERRUPT 0x08 /* Interrupt
> > > status */
> > > #define PCI_STATUS_CAP_LIST 0x10 /* Support
> > > Capability List */
> > > -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz
> > > PCI
> > > 2.1 bus */
> > > +#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz
> > > PCI
> > > 2.1 bus */
> > > #define PCI_STATUS_UDF 0x40 /* Support
> > > User
> > > Definable Features [obsolete] */
> > > #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast
> > > -back to back */
> > > #define PCI_STATUS_PARITY 0x100 /* Detected
> > > parity
> > > error */
> > > @@ -125,7 +126,8 @@
> > > #define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O
> > > bridging type */
> > > #define PCI_IO_RANGE_TYPE_16 0x00
> > > #define PCI_IO_RANGE_TYPE_32 0x01
> > > -#define PCI_IO_RANGE_MASK (~0x0fUL)
> > > +#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O
> > > windows */
> > > +#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O
> > > windows */
> > > #define PCI_SEC_STATUS 0x1e /* Secondary
> > > status register, only bit 14 used */
> > > #define PCI_MEMORY_BASE 0x20 /* Memory
> > > range
> > > behind */
> > > #define PCI_MEMORY_LIMIT 0x22
> > > @@ -203,16 +205,18 @@
> > > #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI
> > > HotSwap
> > > */
> > > #define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
> > > #define PCI_CAP_ID_HT 0x08 /*
> > > HyperTransport */
> > > -#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific
> > > */
> > > +#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific
> > > */
> > > #define PCI_CAP_ID_DBG 0x0A /* Debug port
> > > */
> > > #define PCI_CAP_ID_CCRC 0x0B /* CompactPCI
> > > Central
> > > Resource Control */
> > > -#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot
> > > -Plug Controller */
> > > +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot
> > > -Plug Controller */
> > > #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem
> > > vendor/device ID */
> > > #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI
> > > -PCI
> > > bridge */
> > > -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
> > > +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device
> > > */
> > > +#define PCI_CAP_ID_EXP 0x10 /* PCI
> > > Express
> > > */
> > > #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
> > > -#define PCI_CAP_ID_SATA 0x12 /* Serial ATA */
> > > +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index
> > > Conf. */
> > > #define PCI_CAP_ID_AF 0x13 /* PCI
> > > Advanced
> > > Features */
> > > +#define PCI_CAP_ID_MAX PCI_CAP_ID_AF
> > > #define PCI_CAP_LIST_NEXT 1 /* Next capability in
> > > the list */
> > > #define PCI_CAP_FLAGS 2 /* Capability
> > > defined flags (16 bits) */
> > > #define PCI_CAP_SIZEOF 4
> > > @@ -264,8 +268,8 @@
> > > #define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum
> > > number of requests */
> > > #define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband
> > > addressing enabled */
> > > #define PCI_AGP_COMMAND_AGP 0x0100 /* Allow
> > > processing of AGP transactions */
> > > -#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow
> > > processing of 64-bit addresses */
> > > -#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW
> > > transfers */
> > > +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow
> > > processing of 64-bit addresses */
> > > +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW
> > > transfers */
> > > #define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x
> > > rate
> > > */
> > > #define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x
> > > rate
> > > */
> > > #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x
> > > rate
> > > */
> > > @@ -277,6 +281,7 @@
> > > #define PCI_VPD_ADDR_MASK 0x7fff /* Address mask
> > > */
> > > #define PCI_VPD_ADDR_F 0x8000 /* Write 0,
> > > 1
> > > indicates completion */
> > > #define PCI_VPD_DATA 4 /* 32-bits of data
> > > returned here */
> > > +#define PCI_CAP_VPD_SIZEOF 8
> > >
> > > /* Slot Identification */
> > >
> > > @@ -287,32 +292,36 @@
> > >
> > > /* Message Signalled Interrupts registers */
> > >
> > > -#define PCI_MSI_FLAGS 2 /* Various flags
> > > */
> > > -#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit
> > > addresses allowed */
> > > -#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue
> > > size configured */
> > > -#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue
> > > size available */
> > > -#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature
> > > enabled */
> > > -#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit
> > > mask
> > > bits allowed */
> > > +#define PCI_MSI_FLAGS 2 /* Message Control
> > > */
> > > +#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI
> > > feature
> > > enabled */
> > > +#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum
> > > queue
> > > size available */
> > > +#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message
> > > queue
> > > size configured */
> > > +#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit
> > > addresses allowed */
> > > +#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per
> > > -vector
> > > masking capable */
> > > #define PCI_MSI_RFU 3 /* Rest of
> > > capability
> > > flags */
> > > #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
> > > #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if
> > > PCI_MSI_FLAGS_64BIT set) */
> > > #define PCI_MSI_DATA_32 8 /* 16 bits of
> > > data
> > > for 32-bit devices */
> > > #define PCI_MSI_MASK_32 12 /* Mask bits
> > > register for 32-bit devices */
> > > -#define PCI_MSI_PENDING_32 16 /* Pending bits
> > > register for 32-bit devices */
> > > +#define PCI_MSI_PENDING_32 16 /* Pending intrs for
> > > 32-bit devices */
> > > #define PCI_MSI_DATA_64 12 /* 16 bits of
> > > data for 64-bit devices */
> > > #define PCI_MSI_MASK_64 16 /* Mask bits
> > > register for 64-bit devices */
> > > -#define PCI_MSI_PENDING_64 20 /* Pending bits
> > > register for 32-bit devices */
> > > +#define PCI_MSI_PENDING_64 20 /* Pending intrs for
> > > 64-bit devices */
> > >
> > > /* MSI-X registers */
> > > -#define PCI_MSIX_FLAGS 2
> > > -#define PCI_MSIX_FLAGS_QSIZE 0x7FF
> > > -#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
> > > -#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
> > > -#define PCI_MSIX_TABLE 4
> > > -#define PCI_MSIX_PBA 8
> > > -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
> > > -
> > > -/* MSI-X entry's format */
> > > +#define PCI_MSIX_FLAGS 2 /* Message
> > > Control
> > > */
> > > +#define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size
> > > */
> > > +#define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all
> > > vectors for this function */
> > > +#define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X
> > > enable */
> > > +#define PCI_MSIX_TABLE 4 /* Table offset
> > > */
> > > +#define PCI_MSIX_TABLE_BIR 0x00000007 /* BAR index */
> > > +#define PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* Offset into
> > > specified BAR */
> > > +#define PCI_MSIX_PBA 8 /* Pending Bit
> > > Array
> > > offset */
> > > +#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */
> > > +#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into
> > > specified BAR */
> > > +#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX
> > > registers */
> > > +
> > > +/* MSI-X Table entry format */
> > > #define PCI_MSIX_ENTRY_SIZE 16
> > > #define PCI_MSIX_ENTRY_LOWER_ADDR 0
> > > #define PCI_MSIX_ENTRY_UPPER_ADDR 4
> > > @@ -341,8 +350,9 @@
> > > #define PCI_AF_CTRL_FLR 0x01
> > > #define PCI_AF_STATUS 5
> > > #define PCI_AF_STATUS_TP 0x01
> > > +#define PCI_CAP_AF_SIZEOF 6 /* size of AF
> > > registers
> > > */
> > >
> > > -/* PCI-X registers */
> > > +/* PCI-X registers (Type 0 (non-bridge) devices) */
> > >
> > > #define PCI_X_CMD 2 /* Modes & Features */
> > > #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity
> > > Error Recovery Enable */
> > > @@ -362,7 +372,7 @@
> > > #define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
> > > #define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
> > > #define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max
> > > Outstanding Split Transactions */
> > > -#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /*
> > > Version
> > > */
> > > +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /*
> > > Version
> > > */
> > > #define PCI_X_STATUS 4 /* PCI-X
> > > capabilities
> > > */
> > > #define PCI_X_STATUS_DEVFN 0x000000ff /* A copy
> > > of
> > > devfn */
> > > #define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of
> > > bus nr */
> > > @@ -377,11 +387,28 @@
> > > #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd
> > > Split Completion Error Msg */
> > > #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz
> > > capable */
> > > #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz
> > > capable */
> > > +#define PCI_X_ECC_CSR 8 /* ECC control and
> > > status */
> > > +#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of
> > > registers for Version 0 */
> > > +#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for
> > > Version 1 */
> > > +#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1
> > > /* Same for v2 */
> > > +
> > > +/* PCI-X registers (Type 1 (bridge) devices) */
> > > +
> > > +#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status
> > > */
> > > +#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary
> > > AD
> > > interface is 64 bits */
> > > +#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz
> > > capable */
> > > +#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary
> > > Bus
> > > Mode and Frequency */
> > > +#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X
> > > Capability Version */
> > > +#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not
> > > Mode
> > > 1 */
> > > +#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or
> > > Modes
> > > 1 and 2 */
> > > +#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz
> > > capable */
> > > +#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz
> > > capable */
> > > +#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */
> > >
> > > /* PCI Bridge Subsystem ID registers */
> > >
> > > -#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem
> > > vendor id register */
> > > -#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem
> > > device id register */
> > > +#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem
> > > vendor ID */
> > > +#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem
> > > device ID */
> > >
> > > /* PCI Express capability registers */
> > >
> > > @@ -393,24 +420,24 @@
> > > #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
> > > #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream
> > > Port
> > > */
> > > #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port
> > > */
> > > -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge
> > > */
> > > -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE
> > > Bridge */
> > > +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X
> > > Bridge */
> > > +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to
> > > PCIe
> > > Bridge */
> > > #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex
> > > Integrated Endpoint */
> > > -#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event
> > > Collector */
> > > +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex
> > > Event Collector */
> > > #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot
> > > implemented */
> > > #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt
> > > message number */
> > > #define PCI_EXP_DEVCAP 4 /* Device
> > > capabilities */
> > > -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /*
> > > Max_Payload_Size */
> > > -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom
> > > functions */
> > > -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended
> > > tags */
> > > -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s
> > > Acceptable
> > > Latency */
> > > -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable
> > > Latency */
> > > -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /*
> > > Attention
> > > Button Present */
> > > -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /*
> > > Attention
> > > Indicator Present */
> > > -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power
> > > Indicator Present */
> > > -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based
> > > Error Reporting */
> > > -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power
> > > Limit Value */
> > > -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power
> > > Limit Scale */
> > > +#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /*
> > > Max_Payload_Size */
> > > +#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom
> > > functions */
> > > +#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended
> > > tags
> > > */
> > > +#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable
> > > Latency */
> > > +#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable
> > > Latency */
> > > +#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention
> > > Button Present */
> > > +#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention
> > > Indicator Present */
> > > +#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power
> > > Indicator Present */
> > > +#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based
> > > Error
> > > Reporting */
> > > +#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power
> > > Limit Value */
> > > +#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power
> > > Limit Scale */
> > > #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level
> > > Reset
> > > */
> > > #define PCI_EXP_DEVCTL 8 /* Device Control
> > > */
> > > #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable
> > > Error Reporting En. */
> > > @@ -424,47 +451,61 @@
> > > #define PCI_EXP_DEVCTL_AUX_PME 0x0400 /*
> > > Auxiliary
> > > Power PM Enable */
> > > #define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
> > > #define PCI_EXP_DEVCTL_READRQ 0x7000 /*
> > > Max_Read_Request_Size */
> > > +#define PCI_EXP_DEVCTL_READRQ_128B 0x0000 /* 128 Bytes */
> > > +#define PCI_EXP_DEVCTL_READRQ_256B 0x1000 /* 256 Bytes */
> > > +#define PCI_EXP_DEVCTL_READRQ_512B 0x2000 /* 512 Bytes */
> > > +#define PCI_EXP_DEVCTL_READRQ_1024B 0x3000 /* 1024 Bytes */
> > > #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration
> > > Retry / FLR */
> > > #define PCI_EXP_DEVSTA 10 /* Device Status
> > > */
> > > -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable
> > > Error Detected */
> > > -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal
> > > Error
> > > Detected */
> > > -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error
> > > Detected */
> > > -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported
> > > Request Detected */
> > > -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power
> > > Detected */
> > > -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions
> > > Pending */
> > > +#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable
> > > Error Detected */
> > > +#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal
> > > Error Detected */
> > > +#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error
> > > Detected */
> > > +#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported
> > > Request Detected */
> > > +#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power
> > > Detected */
> > > +#define PCI_EXP_DEVSTA_TRPND 0x0020 /*
> > > Transactions
> > > Pending */
> > > #define PCI_EXP_LNKCAP 12 /* Link
> > > Capabilities */
> > > #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link
> > > Speeds */
> > > +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS
> > > Vector
> > > bit 0 */
> > > +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS
> > > Vector
> > > bit 1 */
> > > #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link
> > > Width */
> > > #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support
> > > */
> > > #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit
> > > Latency */
> > > #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit
> > > Latency
> > > */
> > > -#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock
> > > Power
> > > Management */
> > > +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power
> > > Management */
> > > #define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down
> > > Error Reporting Capable */
> > > #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link
> > > Layer Link Active Reporting Capable */
> > > #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth
> > > Notification Capability */
> > > #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
> > > #define PCI_EXP_LNKCTL 16 /* Link Control
> > > */
> > > #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM
> > > Control
> > > */
> > > +#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
> > > +#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
> > > #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read
> > > Completion Boundary */
> > > #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable
> > > */
> > > #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link
> > > */
> > > #define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock
> > > Configuration */
> > > #define PCI_EXP_LNKCTL_ES 0x0080 /* Extended
> > > Synch
> > > */
> > > -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq
> > > */
> > > +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
> > > #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware
> > > Autonomous Width Disable */
> > > #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link
> > > Bandwidth Management Interrupt Enable */
> > > -#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk
> > > Autonomous Bandwidth Interrupt Enable */
> > > +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link
> > > Autonomous Bandwidth Interrupt Enable */
> > > #define PCI_EXP_LNKSTA 18 /* Link Status
> > > */
> > > #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link
> > > Speed */
> > > -#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link
> > > Speed 2.5GT/s */
> > > -#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link
> > > Speed 5.0GT/s */
> > > -#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated
> > > Link Width */
> > > +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed
> > > 2.5GT/s */
> > > +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed
> > > 5.0GT/s */
> > > +#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed
> > > 8.0GT/s */
> > > +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated
> > > Link Width */
> > > +#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current
> > > Link Width x1 */
> > > +#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current
> > > Link Width x2 */
> > > +#define PCI_EXP_LNKSTA_NLW_X4 0x0040 /* Current
> > > Link Width x4 */
> > > +#define PCI_EXP_LNKSTA_NLW_X8 0x0080 /* Current
> > > Link Width x8 */
> > > #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask
> > > in
> > > link status */
> > > #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training
> > > */
> > > #define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock
> > > Configuration */
> > > #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link
> > > Layer Link Active */
> > > #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link
> > > Bandwidth Management Status */
> > > #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link
> > > Autonomous Bandwidth Status */
> > > +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1
> > > endpoints end here */
> > > #define PCI_EXP_SLTCAP 20 /* Slot
> > > Capabilities */
> > > #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention
> > > Button
> > > Present */
> > > #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power
> > > Controller
> > > Present */
> > > @@ -486,8 +527,16 @@
> > > #define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command
> > > Completed Interrupt Enable */
> > > #define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug
> > > Interrupt Enable */
> > > #define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention
> > > Indicator Control */
> > > +#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention
> > > Indicator on */
> > > +#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention
> > > Indicator blinking */
> > > +#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention
> > > Indicator off */
> > > #define PCI_EXP_SLTCTL_PIC 0x0300 /* Power
> > > Indicator Control */
> > > +#define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator
> > > on */
> > > +#define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator
> > > blinking */
> > > +#define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator
> > > off */
> > > #define PCI_EXP_SLTCTL_PCC 0x0400 /* Power
> > > Controller Control */
> > > +#define PCI_EXP_SLTCTL_PWR_ON 0x0000 /* Power On */
> > > +#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
> > > #define PCI_EXP_SLTCTL_EIC 0x0800 /*
> > > Electromechanical Interlock Control */
> > > #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link
> > > Layer State Changed Enable */
> > > #define PCI_EXP_SLTSTA 26 /* Slot Status
> > > */
> > > @@ -501,52 +550,94 @@
> > > #define PCI_EXP_SLTSTA_EIS 0x0080 /*
> > > Electromechanical Interlock Status */
> > > #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link
> > > Layer State Changed */
> > > #define PCI_EXP_RTCTL 28 /* Root Control
> > > */
> > > -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error
> > > on
> > > Correctable Error */
> > > -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error
> > > on Non-Fatal Error */
> > > -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error
> > > on
> > > Fatal Error */
> > > -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt
> > > Enable */
> > > -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software
> > > Visibility Enable */
> > > +#define PCI_EXP_RTCTL_SECEE 0x0001 /* System
> > > Error
> > > on Correctable Error */
> > > +#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System
> > > Error
> > > on Non-Fatal Error */
> > > +#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System
> > > Error
> > > on Fatal Error */
> > > +#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME
> > > Interrupt
> > > Enable */
> > > +#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS
> > > Software
> > > Visibility Enable */
> > > #define PCI_EXP_RTCAP 30 /* Root
> > > Capabilities */
> > > +#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS
> > > Software
> > > Visibility capability */
> > > #define PCI_EXP_RTSTA 32 /* Root Status */
> > > -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
> > > -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
> > > +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
> > > +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending
> > > */
> > > +/*
> > > + * The Device Capabilities 2, Device Status 2, Device Control 2,
> > > + * Link Capabilities 2, Link Status 2, Link Control 2,
> > > + * Slot Capabilities 2, Slot Status 2, and Slot Control 2
> > > registers
> > > + * are only present on devices with PCIe Capability version 2.
> > > + * Use pcie_capability_read_word() and similar interfaces to use
> > > them
> > > + * safely.
> > > + */
> > > #define PCI_EXP_DEVCAP2 36 /* Device
> > > Capabilities 2 */
> > > -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative
> > > Routing-ID */
> > > -#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency
> > > tolerance reporting */
> > > -#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support
> > > mechanism */
> > > -#define PCI_EXP_OBFF_MSG 0x40000 /* New message
> > > signaling
> > > */
> > > -#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for
> > > OBFF
> > > */
> > > +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /*
> > > Alternative Routing-ID */
> > > +#define PCI_EXP_DEVCAP2_LTR 0x00000800 /*
> > > Latency
> > > tolerance reporting */
> > > +#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF
> > > support mechanism */
> > > +#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New
> > > message
> > > signaling */
> > > +#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use
> > > WAKE# for OBFF */
> > > #define PCI_EXP_DEVCTL2 40 /* Device
> > > Control
> > > 2 */
> > > -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative
> > > Routing-ID */
> > > -#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based
> > > ordering request enable */
> > > -#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based
> > > ordering completion enable */
> > > -#define PCI_EXP_LTR_EN 0x400 /* Latency
> > > tolerance reporting */
> > > -#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF
> > > enable
> > > with Message type A */
> > > -#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF
> > > enable
> > > with Message type B */
> > > -#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using
> > > WAKE# signaling */
> > > +#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /*
> > > Completion Timeout Value */
> > > +#define PCI_EXP_DEVCTL2_ARI 0x0020 /*
> > > Alternative Routing-ID */
> > > +#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /*
> > > Allow
> > > IDO for requests */
> > > +#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /*
> > > Allow
> > > IDO for completions */
> > > +#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /*
> > > Enable LTR mechanism */
> > > +#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /*
> > > Enable OBFF Message type A */
> > > +#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /*
> > > Enable OBFF Message type B */
> > > +#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /*
> > > OBFF
> > > using WAKE# signaling */
> > > +#define PCI_EXP_DEVSTA2 42 /* Device
> > > Status
> > > 2 */
> > > +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2
> > > endpoints end here */
> > > +#define PCI_EXP_LNKCAP2 44 /* Link
> > > Capabilities 2 */
> > > +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /*
> > > Supported
> > > Speed 2.5GT/s */
> > > +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /*
> > > Supported
> > > Speed 5.0GT/s */
> > > +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /*
> > > Supported
> > > Speed 8.0GT/s */
> > > +#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /*
> > > Crosslink
> > > supported */
> > > #define PCI_EXP_LNKCTL2 48 /* Link Control
> > > 2
> > > */
> > > +#define PCI_EXP_LNKSTA2 50 /* Link Status
> > > 2
> > > */
> > > +#define PCI_EXP_SLTCAP2 52 /* Slot
> > > Capabilities 2 */
> > > #define PCI_EXP_SLTCTL2 56 /* Slot Control
> > > 2
> > > */
> > > +#define PCI_EXP_SLTSTA2 58 /* Slot Status
> > > 2
> > > */
> > >
> > > /* Extended Capabilities (PCI-X 2.0 and Express) */
> > > #define PCI_EXT_CAP_ID(header) (header &
> > > 0x0000ffff)
> > > #define PCI_EXT_CAP_VER(header) ((header >> 16) &
> > > 0xf)
> > > #define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
> > >
> > > -#define PCI_EXT_CAP_ID_ERR 1
> > > -#define PCI_EXT_CAP_ID_VC 2
> > > -#define PCI_EXT_CAP_ID_DSN 3
> > > -#define PCI_EXT_CAP_ID_PWR 4
> > > -#define PCI_EXT_CAP_ID_VNDR 11
> > > -#define PCI_EXT_CAP_ID_ACS 13
> > > -#define PCI_EXT_CAP_ID_ARI 14
> > > -#define PCI_EXT_CAP_ID_ATS 15
> > > -#define PCI_EXT_CAP_ID_SRIOV 16
> > > -#define PCI_EXT_CAP_ID_LTR 24
> > > +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error
> > > Reporting */
> > > +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel
> > > Capability */
> > > +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial
> > > Number */
> > > +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting
> > > */
> > > +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex
> > > Link Declaration */
> > > +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex
> > > Internal Link Control */
> > > +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex
> > > Event Collector */
> > > +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function
> > > VC Capability */
> > > +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
> > > +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex
> > > RB?
> > > */
> > > +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor
> > > -Specific
> > > */
> > > +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access -
> > > obsolete */
> > > +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control
> > > Services */
> > > +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate
> > > Routing
> > > ID */
> > > +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address
> > > Translation Services */
> > > +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root
> > > I/O
> > > Virtualization */
> > > +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root
> > > I/O
> > > Virtualization */
> > > +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
> > > +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request
> > > Interface */
> > > +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved
> > > for
> > > AMD */
> > > +#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR
> > > */
> > > +#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power
> > > Allocation */
> > > +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester
> > > */
> > > +#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency
> > > Tolerance
> > > Reporting */
> > > +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary
> > > PCIe
> > > Capability */
> > > +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol
> > > Multiplexing */
> > > +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process
> > > Address
> > > Space ID */
> > > +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
> > > +
> > > +#define PCI_EXT_CAP_DSN_SIZEOF 12
> > > +#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
> > >
> > > /* Advanced Error Reporting */
> > > #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable
> > > Error Status */
> > > -#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training
> > > */
> > > +#define PCI_ERR_UNC_TRAIN 0x00000001 /* Undefined
> > > */
> > > #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link
> > > Protocol */
> > > +#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise
> > > Down */
> > > #define PCI_ERR_UNC_POISON_TLP 0x00001000 /*
> > > Poisoned TLP */
> > > #define PCI_ERR_UNC_FCP 0x00002000 /* Flow
> > > Control
> > > Protocol */
> > > #define PCI_ERR_UNC_COMP_TIME 0x00004000 /*
> > > Completion Timeout */
> > > @@ -556,6 +647,11 @@
> > > #define PCI_ERR_UNC_MALF_TLP 0x00040000 /*
> > > Malformed TLP */
> > > #define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error
> > > Status */
> > > #define PCI_ERR_UNC_UNSUP 0x00100000 /*
> > > Unsupported
> > > Request */
> > > +#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS
> > > Violation */
> > > +#define PCI_ERR_UNC_INTN 0x00400000 /* internal
> > > error */
> > > +#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC
> > > blocked
> > > TLP */
> > > +#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic
> > > egress blocked */
> > > +#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP
> > > prefix
> > > blocked */
> > > #define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable
> > > Error
> > > Mask */
> > > /* Same bits as above */
> > > #define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable
> > > Error Severity */
> > > @@ -566,6 +662,9 @@
> > > #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad
> > > DLLP
> > > Status */
> > > #define PCI_ERR_COR_REP_ROLL 0x00000100 /*
> > > REPLAY_NUM Rollover */
> > > #define PCI_ERR_COR_REP_TIMER 0x00001000 /*
> > > Replay
> > > Timer Timeout */
> > > +#define PCI_ERR_COR_ADV_NFAT 0x00002000 /*
> > > Advisory
> > > Non-Fatal */
> > > +#define PCI_ERR_COR_INTERNAL 0x00004000 /*
> > > Corrected Internal */
> > > +#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header
> > > Log Overflow */
> > > #define PCI_ERR_COR_MASK 20 /* Correctable Error
> > > Mask */
> > > /* Same bits as above */
> > > #define PCI_ERR_CAP 24 /* Advanced Error
> > > Capabilities */
> > > @@ -586,9 +685,9 @@
> > > #define PCI_ERR_ROOT_COR_RCV 0x00000001 /*
> > > ERR_COR Received */
> > > /* Multi ERR_COR Received */
> > > #define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
> > > -/* ERR_FATAL/NONFATAL Recevied */
> > > +/* ERR_FATAL/NONFATAL Received */
> > > #define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
> > > -/* Multi ERR_FATAL/NONFATAL Recevied */
> > > +/* Multi ERR_FATAL/NONFATAL Received */
> > > #define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
> > > #define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /*
> > > First
> > > Fatal */
> > > #define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /*
> > > Non
> > > -Fatal Received */
> > > @@ -596,13 +695,36 @@
> > > #define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source
> > > Identification */
> > >
> > > /* Virtual Channel */
> > > -#define PCI_VC_PORT_REG1 4
> > > -#define PCI_VC_PORT_REG2 8
> > > +#define PCI_VC_PORT_CAP1 4
> > > +#define PCI_VC_CAP1_EVCC 0x00000007 /* extended
> > > VC
> > > count */
> > > +#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio
> > > extended VC count */
> > > +#define PCI_VC_CAP1_ARB_SIZE 0x00000c00
> > > +#define PCI_VC_PORT_CAP2 8
> > > +#define PCI_VC_CAP2_32_PHASE 0x00000002
> > > +#define PCI_VC_CAP2_64_PHASE 0x00000004
> > > +#define PCI_VC_CAP2_128_PHASE 0x00000008
> > > +#define PCI_VC_CAP2_ARB_OFF 0xff000000
> > > #define PCI_VC_PORT_CTRL 12
> > > +#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001
> > > #define PCI_VC_PORT_STATUS 14
> > > +#define PCI_VC_PORT_STATUS_TABLE 0x00000001
> > > #define PCI_VC_RES_CAP 16
> > > +#define PCI_VC_RES_CAP_32_PHASE 0x00000002
> > > +#define PCI_VC_RES_CAP_64_PHASE 0x00000004
> > > +#define PCI_VC_RES_CAP_128_PHASE 0x00000008
> > > +#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010
> > > +#define PCI_VC_RES_CAP_256_PHASE 0x00000020
> > > +#define PCI_VC_RES_CAP_ARB_OFF 0xff000000
> > > #define PCI_VC_RES_CTRL 20
> > > +#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000
> > > +#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000
> > > +#define PCI_VC_RES_CTRL_ID 0x07000000
> > > +#define PCI_VC_RES_CTRL_ENABLE 0x80000000
> > > #define PCI_VC_RES_STATUS 26
> > > +#define PCI_VC_RES_STATUS_TABLE 0x00000001
> > > +#define PCI_VC_RES_STATUS_NEGO 0x00000002
> > > +#define PCI_CAP_VC_BASE_SIZEOF 0x10
> > > +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
> > >
> > > /* Power Budgeting */
> > > #define PCI_PWR_DSR 4 /* Data Select
> > > Register */
> > > @@ -615,9 +737,16 @@
> > > #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /*
> > > Power
> > > Rail */
> > > #define PCI_PWR_CAP 12 /* Capability */
> > > #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /*
> > > Included
> > > in system budget */
> > > +#define PCI_EXT_CAP_PWR_SIZEOF 16
> > > +
> > > +/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
> > > +#define PCI_VNDR_HEADER 4 /* Vendor
> > > -Specific
> > > Header */
> > > +#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff)
> > > +#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf)
> > > +#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
> > >
> > > /*
> > > - * Hypertransport sub capability types
> > > + * HyperTransport sub capability types
> > > *
> > > * Unfortunately there are both 3 bit and 5 bit capability types
> > > defined
> > > * in the HT spec, catering for that is a little messy. You
> > > probably don't
> > > @@ -645,8 +774,10 @@
> > > #define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct
> > > routing configuration */
> > > #define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel
> > > configuration */
> > > #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on
> > > error configuration */
> > > -#define HT_CAPTYPE_GEN3 0xD0 /* Generation
> > > 3
> > > hypertransport configuration */
> > > -#define HT_CAPTYPE_PM 0xE0 /*
> > > Hypertransport
> > > powermanagement configuration */
> > > +#define HT_CAPTYPE_GEN3 0xD0 /* Generation
> > > 3
> > > HyperTransport configuration */
> > > +#define HT_CAPTYPE_PM 0xE0 /*
> > > HyperTransport
> > > power management configuration */
> > > +#define HT_CAP_SIZEOF_LONG 28 /* slave & primary
> > > */
> > > +#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary
> > > */
> > >
> > > /* Alternative Routing-ID Interpretation */
> > > #define PCI_ARI_CAP 0x04 /* ARI Capability
> > > Register */
> > > @@ -657,6 +788,7 @@
> > > #define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function
> > > Groups Enable */
> > > #define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function
> > > Groups Enable */
> > > #define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function
> > > Group */
> > > +#define PCI_EXT_CAP_ARI_SIZEOF 8
> > >
> > > /* Address Translation Service */
> > > #define PCI_ATS_CAP 0x04 /* ATS Capability
> > > Register */
> > > @@ -666,6 +798,29 @@
> > > #define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable
> > > */
> > > #define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /*
> > > Smallest Translation Unit */
> > > #define PCI_ATS_MIN_STU 12 /* shift of minimum
> > > STU
> > > block */
> > > +#define PCI_EXT_CAP_ATS_SIZEOF 8
> > > +
> > > +/* Page Request Interface */
> > > +#define PCI_PRI_CTRL 0x04 /* PRI control
> > > register */
> > > +#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */
> > > +#define PCI_PRI_CTRL_RESET 0x02 /* Reset */
> > > +#define PCI_PRI_STATUS 0x06 /* PRI status
> > > register */
> > > +#define PCI_PRI_STATUS_RF 0x001 /* Response
> > > Failure
> > > */
> > > +#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected
> > > PRG index */
> > > +#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI
> > > Stopped
> > > */
> > > +#define PCI_PRI_MAX_REQ 0x08 /* PRI max
> > > reqs
> > > supported */
> > > +#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs
> > > allowed */
> > > +#define PCI_EXT_CAP_PRI_SIZEOF 16
> > > +
> > > +/* Process Address Space ID */
> > > +#define PCI_PASID_CAP 0x04 /* PASID feature
> > > register */
> > > +#define PCI_PASID_CAP_EXEC 0x02 /* Exec
> > > permissions
> > > Supported */
> > > +#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode
> > > Supported */
> > > +#define PCI_PASID_CTRL 0x06 /* PASID control
> > > register */
> > > +#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit
> > > */
> > > +#define PCI_PASID_CTRL_EXEC 0x02 /* Exec
> > > permissions Enable */
> > > +#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege
> > > Mode
> > > Enable */
> > > +#define PCI_EXT_CAP_PASID_SIZEOF 8
> > >
> > > /* Single Root I/O Virtualization */
> > > #define PCI_SRIOV_CAP 0x04 /* SR-IOV
> > > Capabilities */
> > > @@ -697,12 +852,14 @@
> > > #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn
> > > */
> > > #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut
> > > */
> > > #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available
> > > */
> > > +#define PCI_EXT_CAP_SRIOV_SIZEOF 64
> > >
> > > #define PCI_LTR_MAX_SNOOP_LAT 0x4
> > > #define PCI_LTR_MAX_NOSNOOP_LAT 0x6
> > > #define PCI_LTR_VALUE_MASK 0x000003ff
> > > #define PCI_LTR_SCALE_MASK 0x00001c00
> > > #define PCI_LTR_SCALE_SHIFT 10
> > > +#define PCI_EXT_CAP_LTR_SIZEOF 8
> > >
> > > /* Access Control Service */
> > > #define PCI_ACS_CAP 0x04 /* ACS Capability
> > > Register */
> > > @@ -713,7 +870,38 @@
> > > #define PCI_ACS_UF 0x10 /* Upstream
> > > Forwarding */
> > > #define PCI_ACS_EC 0x20 /* P2P Egress
> > > Control */
> > > #define PCI_ACS_DT 0x40 /* Direct
> > > Translated P2P */
> > > +#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress
> > > Control Vector Size */
> > > #define PCI_ACS_CTRL 0x06 /* ACS Control
> > > Register */
> > > #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress
> > > Control Vector */
> > >
> > > +#define PCI_VSEC_HDR 4 /* extended cap -
> > > vendor-specific */
> > > +#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for
> > > length field */
> > > +
> > > +/* SATA capability */
> > > +#define PCI_SATA_REGS 4 /* SATA REGs
> > > specifier */
> > > +#define PCI_SATA_REGS_MASK 0xF /* location -
> > > BAR#/inline */
> > > +#define PCI_SATA_REGS_INLINE 0xF /* REGS in
> > > config
> > > space */
> > > +#define PCI_SATA_SIZEOF_SHORT 8
> > > +#define PCI_SATA_SIZEOF_LONG 16
> > > +
> > > +/* Resizable BARs */
> > > +#define PCI_REBAR_CTRL 8 /* control
> > > register
> > > */
> > > +#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask
> > > for # bars */
> > > +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for
> > > #
> > > bars */
> > > +
> > > +/* Dynamic Power Allocation */
> > > +#define PCI_DPA_CAP 4 /* capability
> > > register
> > > */
> > > +#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* #
> > > substates - 1 */
> > > +#define PCI_DPA_BASE_SIZEOF 16 /* size with 0
> > > substates */
> > > +
> > > +/* TPH Requester */
> > > +#define PCI_TPH_CAP 4 /* capability
> > > register
> > > */
> > > +#define PCI_TPH_CAP_LOC_MASK 0x600 /* location
> > > mask
> > > */
> > > +#define PCI_TPH_LOC_NONE 0x000 /* no location */
> > > +#define PCI_TPH_LOC_CAP 0x200 /* in capability
> > > */
> > > +#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
> > > +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table
> > > mask */
> > > +#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift
> > > */
> > > +#define PCI_TPH_BASE_SIZEOF 12 /* size with no st
> > > table */
> > > +