[Qemu-devel] [RFC PATCH 04/14] spapr_pci: Fold spapr_phb_vfio_eeh_configure() into spapr_pci code

[David Gibson]

Because spapr_phb_check_vfio_group() now safely returns an error on a non
VFIO papr host bridge, it becomes safe to call
spapr_phb_vfio_eeh_configure() on any host bridge, not just the special
VFIO host bridges.

So fold its code into rtas_ibm_configure_pe(), instead of only calling it
via a class method.

Signed-off-by: David Gibson <address@hidden>
---
 hw/ppc/spapr_pci.c          | 15 ++++++++++-----
 hw/ppc/spapr_pci_vfio.c     | 19 -------------------
 include/hw/pci-host/spapr.h |  1 -
 3 files changed, 10 insertions(+), 25 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 4b7217d..2da5991 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -604,7 +604,7 @@ static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
                                   target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
+    VFIOGroup *group;
     uint64_t buid;
     int ret;
 
@@ -618,13 +618,18 @@ static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_configure) {
+    ret = spapr_phb_check_vfio_group(sphb, &group);
+    if (ret != RTAS_OUT_SUCCESS) {
+        rtas_st(rets, 0, ret);
+        return;
+    }
+
+    ret = vfio_eeh_op(group, VFIO_EEH_PE_CONFIGURE);
+    if (ret < 0) {
         goto param_error_exit;
     }
 
-    ret = spc->eeh_configure(sphb);
-    rtas_st(rets, 0, ret);
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
     return;
 
 param_error_exit:
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index 047fb30..a13fb0a 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -264,24 +264,6 @@ static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, 
int option)
     return RTAS_OUT_SUCCESS;
 }
 
-static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
-{
-    VFIOGroup *group;
-    int ret;
-
-    ret = spapr_phb_check_vfio_group(sphb, &group);
-    if (ret != RTAS_OUT_SUCCESS) {
-        return ret;
-    }
-
-    ret = vfio_eeh_op(group, VFIO_EEH_PE_CONFIGURE);
-    if (ret < 0) {
-        return RTAS_OUT_PARAM_ERROR;
-    }
-
-    return RTAS_OUT_SUCCESS;
-}
-
 static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -293,7 +275,6 @@ static void spapr_phb_vfio_class_init(ObjectClass *klass, 
void *data)
     spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
     spc->eeh_get_state = spapr_phb_vfio_eeh_get_state;
     spc->eeh_reset = spapr_phb_vfio_eeh_reset;
-    spc->eeh_configure = spapr_phb_vfio_eeh_configure;
 }
 
 static const TypeInfo spapr_phb_vfio_info = {
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 68cf99b..d5d98ec 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -53,7 +53,6 @@ struct sPAPRPHBClass {
     int (*eeh_set_option)(sPAPRPHBState *sphb, unsigned int addr, int option);
     int (*eeh_get_state)(sPAPRPHBState *sphb, int *state);
     int (*eeh_reset)(sPAPRPHBState *sphb, int option);
-    int (*eeh_configure)(sPAPRPHBState *sphb);
 };
 
 typedef struct spapr_pci_msi {
-- 
2.4.3