qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v4 3/7] libqtest: New hmp() & friends


From: Thomas Huth
Subject: Re: [Qemu-devel] [PATCH v4 3/7] libqtest: New hmp() & friends
Date: Tue, 29 Sep 2015 08:38:37 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.2.0

On 28/09/15 22:08, Markus Armbruster wrote:
> New convenience function hmp() to facilitate use of
> human-monitor-command in tests.  Use it to simplify its existing uses.
> 
> To blend into existing libqtest code, also add qtest_hmpv() and
> qtest_hmp().  That, and the egregiously verbose GTK-Doc comment format
> make this patch look bigger than it is.
> 
> Signed-off-by: Markus Armbruster <address@hidden>
> Reviewed-by: Eric Blake <address@hidden>
> ---
>  tests/drive_del-test.c | 22 ++++++----------------
>  tests/ide-test.c       |  8 ++------
>  tests/libqtest.c       | 37 +++++++++++++++++++++++++++++++++++++
>  tests/libqtest.h       | 33 +++++++++++++++++++++++++++++++++
>  4 files changed, 78 insertions(+), 22 deletions(-)
> 
> diff --git a/tests/drive_del-test.c b/tests/drive_del-test.c
> index 8951f6f..3390946 100644
> --- a/tests/drive_del-test.c
> +++ b/tests/drive_del-test.c
> @@ -16,28 +16,18 @@
>  
>  static void drive_add(void)
>  {
> -    QDict *response;
> +    char *resp = hmp("drive_add 0 if=none,id=drive0");
>  
> -    response = qmp("{'execute': 'human-monitor-command',"
> -                   " 'arguments': {"
> -                   "   'command-line': 'drive_add 0 if=none,id=drive0'"
> -                   "}}");
> -    g_assert(response);
> -    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "OK\r\n");
> -    QDECREF(response);
> +    g_assert_cmpstr(resp, ==, "OK\r\n");
> +    g_free(resp);
>  }
>  
>  static void drive_del(void)
>  {
> -    QDict *response;
> +    char *resp = hmp("drive_del drive0");
>  
> -    response = qmp("{'execute': 'human-monitor-command',"
> -                   " 'arguments': {"
> -                   "   'command-line': 'drive_del drive0'"
> -                   "}}");
> -    g_assert(response);
> -    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "");
> -    QDECREF(response);
> +    g_assert_cmpstr(resp, ==, "");
> +    g_free(resp);
>  }
>  
>  static void device_del(void)
> diff --git a/tests/ide-test.c b/tests/ide-test.c
> index 5594738..6173dfa 100644
> --- a/tests/ide-test.c
> +++ b/tests/ide-test.c
> @@ -510,9 +510,7 @@ static void test_flush(void)
>          tmp_path);
>  
>      /* Delay the completion of the flush request until we explicitly do it */
> -    qmp_discard_response("{'execute':'human-monitor-command', 'arguments': {"
> -                         " 'command-line':"
> -                         " 'qemu-io ide0-hd0 \"break flush_to_os A\"'} }");
> +    g_free(hmp("qemu-io ide0-hd0 \"break flush_to_os A\""));
>  
>      /* FLUSH CACHE command on device 0*/
>      outb(IDE_BASE + reg_device, 0);
> @@ -524,9 +522,7 @@ static void test_flush(void)
>      assert_bit_clear(data, DF | ERR | DRQ);
>  
>      /* Complete the command */
> -    qmp_discard_response("{'execute':'human-monitor-command', 'arguments': {"
> -                         " 'command-line':"
> -                         " 'qemu-io ide0-hd0 \"resume A\"'} }");
> +    g_free(hmp("qemu-io ide0-hd0 \"resume A\""));
>  
>      /* Check registers */
>      data = inb(IDE_BASE + reg_device);
> diff --git a/tests/libqtest.c b/tests/libqtest.c
> index 8dede56..2a396ba 100644
> --- a/tests/libqtest.c
> +++ b/tests/libqtest.c
> @@ -483,6 +483,33 @@ void qtest_qmp_eventwait(QTestState *s, const char 
> *event)
>      }
>  }
>  
> +char *qtest_hmpv(QTestState *s, const char *fmt, va_list ap)
> +{
> +    char *cmd;
> +    QDict *resp;
> +    char *ret;
> +
> +    cmd = g_strdup_vprintf(fmt, ap);
> +    resp = qtest_qmp(s, "{'execute': 'human-monitor-command',"
> +                     " 'arguments': {'command-line': %s}}",
> +                     cmd);
> +    ret = g_strdup(qdict_get_try_str(resp, "return"));
> +    g_assert(ret);
> +    QDECREF(resp);
> +    g_free(cmd);
> +    return ret;
> +}
> +
> +char *qtest_hmp(QTestState *s, const char *fmt, ...)
> +{
> +    va_list ap;
> +    char *ret;
> +
> +    va_start(ap, fmt);
> +    ret = qtest_hmpv(s, fmt, ap);
> +    va_end(ap);
> +    return ret;
> +}
>  
>  const char *qtest_get_arch(void)
>  {
> @@ -774,6 +801,16 @@ void qmp_discard_response(const char *fmt, ...)
>      qtest_qmpv_discard_response(global_qtest, fmt, ap);
>      va_end(ap);
>  }
> +char *hmp(const char *fmt, ...)
> +{
> +    va_list ap;
> +    char *ret;
> +
> +    va_start(ap, fmt);
> +    ret = qtest_hmpv(global_qtest, fmt, ap);
> +    va_end(ap);
> +    return ret;
> +}
>  
>  bool qtest_big_endian(void)
>  {
> diff --git a/tests/libqtest.h b/tests/libqtest.h
> index ec42031..b270f7b 100644
> --- a/tests/libqtest.h
> +++ b/tests/libqtest.h
> @@ -120,6 +120,29 @@ QDict *qtest_qmp_receive(QTestState *s);
>  void qtest_qmp_eventwait(QTestState *s, const char *event);
>  
>  /**
> + * qtest_hmpv:
> + * @s: #QTestState instance to operate on.
> + * @fmt...: HMP command to send to QEMU
> + *
> + * Send HMP command to QEMU via QMP's human-monitor-command.
> + *
> + * Returns: the command's output.
> + */
> +char *qtest_hmp(QTestState *s, const char *fmt, ...);
> +
> +/**
> + * qtest_hmpv:
> + * @s: #QTestState instance to operate on.
> + * @fmt: HMP command to send to QEMU
> + * @ap: HMP command arguments
> + *
> + * Send HMP command to QEMU via QMP's human-monitor-command.
> + *
> + * Returns: the command's output.

Maybe mention that the output string should be free'd with g_free() ?

> + */
> +char *qtest_hmpv(QTestState *s, const char *fmt, va_list ap);
> +
> +/**
>   * qtest_get_irq:
>   * @s: #QTestState instance to operate on.
>   * @num: Interrupt to observe.
> @@ -499,6 +522,16 @@ static inline void qmp_eventwait(const char *event)
>  }
>  
>  /**
> + * hmp:
> + * @fmt...: HMP command to send to QEMU
> + *
> + * Send HMP command to QEMU via QMP's human-monitor-command.
> + *
> + * Returns: the command's output.

dito

Anyway, patch looks fine to me, so:

Reviewed-by: Thomas Huth <address@hidden>





reply via email to

[Prev in Thread] Current Thread [Next in Thread]