[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 5/5] xlnx-ep108: Connect the SPI Flash
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH v2 5/5] xlnx-ep108: Connect the SPI Flash |
Date: |
Wed, 7 Oct 2015 17:01:41 -0700 |
On Wed, Oct 7, 2015 at 2:34 PM, Alistair Francis
<address@hidden> wrote:
> Connect the sst25wf080 SPI flash to the EP108 board.
>
> Signed-off-by: Alistair Francis <address@hidden>
> ---
> V2:
> - Use sst25wf080 instead of m25p80
>
> hw/arm/xlnx-ep108.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
> index 2899698..9755c30 100644
> --- a/hw/arm/xlnx-ep108.c
> +++ b/hw/arm/xlnx-ep108.c
> @@ -33,6 +33,7 @@ static struct arm_boot_info xlnx_ep108_binfo;
> static void xlnx_ep108_init(MachineState *machine)
> {
> XlnxEP108 *s = g_new0(XlnxEP108, 1);
> + int i, j;
> Error *err = NULL;
>
> object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
> @@ -60,6 +61,25 @@ static void xlnx_ep108_init(MachineState *machine)
> machine->ram_size);
> memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram);
>
> + for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
> + SSIBus *spi_bus;
> + char bus_name[6];
> +
> + snprintf(bus_name, 6, "spi%d", i);
> + spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(&s->soc.spi[i]),
> + bus_name);
So machine level code shouldn't reach into the SoC like this. Instead
the bus should be passed from the SPI controller to SoC itself, then
use qdev_get_child_bus on the SoC itself.
Regards,
Peter
> +
> + for (j = 0; j < XLNX_ZYNQMP_NUM_SPI_FLASHES; ++j) {
> + DeviceState *flash_dev = ssi_create_slave(spi_bus, "sst25wf080");
> + qemu_irq cs_line = qdev_get_gpio_in_named(flash_dev,
> + SSI_GPIO_CS, 0);
> +
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]),
> + i * XLNX_ZYNQMP_NUM_SPI_FLASHES + j,
> + cs_line);
> + }
> + }
> +
> xlnx_ep108_binfo.ram_size = machine->ram_size;
> xlnx_ep108_binfo.kernel_filename = machine->kernel_filename;
> xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline;
> --
> 2.1.4
>
[Qemu-devel] [PATCH v2 2/5] ssi: Move ssi.h into a separate directory, Alistair Francis, 2015/10/08