qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Bug 1500175] unable to init msix vectors


From: Sam Vervaeck
Subject: Re: [Qemu-devel] [Bug 1500175] unable to init msix vectors
Date: Thu, 01 Oct 2015 06:06:37 -0000

Got it, thanks!

> Op 29-sep.-2015, om 03:51 heeft Peter Maydell <address@hidden> het volgende 
> geschreven:
> 
> None of QEMU's ARM boards automatically boot a bios image shipped with
> QEMU. You must provide one explicitly, or else use the 'built in
> bootloader" with -kernel. (I'm not aware of any rom image that would
> work on QEMU versatilepb and load a kernel off a disk image, so in
> practice -kernel is what you want.)
> 
> -- 
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1500175
> 
> Title:
>  unable to init msix vectors
> 
> Status in QEMU:
>  Invalid
> 
> Bug description:
>  Using the latest stable (2.4.0.1) and earlier releases (at least down
>  to 2.2.1), I am unable to run a qemu-system-arm virtualization on a
>  Mac OS X Yosemite machine. QEMU was compiled with --enable-sdl.
> 
>  Command line:
> 
>  qemu-system-arm -device virtio-net,netdev=user.0 -drive
>  file=pack,if=virtio,cache=writeback,discard=ignore -netdev
>  user,id=user.0,hostfwd=tcp::3499-:22 -cdrom
>  /opt/node-4.1.0/packer/2015-05-05-raspbian-wheezy.img -m 512M -boot
>  once=d -vnc 0.0.0.0:87 -name packer-qemu -machine type=versatilepb
>  -nographic
> 
>  Output:
> 
>  qemu-system-arm: -device virtio-net,netdev=user.0: unable to init msix 
> vectors to 3
>  qemu-system-arm: -drive file=pack,if=virtio,cache=writeback,discard=ignore: 
> unable to init msix vectors to 2
>  qemu: fatal: Trying to execute code outside RAM or ROM at 0x10000000
> 
>  R00=00000000 R01=00000000 R02=00000000 R03=00000000
>  R04=00000000 R05=00000000 R06=00000000 R07=00000000
>  R08=00000000 R09=00000000 R10=00000000 R11=00000000
>  R12=00000000 R13=00000000 R14=00000000 R15=10000000
>  PSR=400001d3 -Z-- A svc32
>  s00=00000000 s01=00000000 d00=0000000000000000
>  s02=00000000 s03=00000000 d01=0000000000000000
>  s04=00000000 s05=00000000 d02=0000000000000000
>  s06=00000000 s07=00000000 d03=0000000000000000
>  s08=00000000 s09=00000000 d04=0000000000000000
>  s10=00000000 s11=00000000 d05=0000000000000000
>  s12=00000000 s13=00000000 d06=0000000000000000
>  s14=00000000 s15=00000000 d07=0000000000000000
>  s16=00000000 s17=00000000 d08=0000000000000000
>  s18=00000000 s19=00000000 d09=0000000000000000
>  s20=00000000 s21=00000000 d10=0000000000000000
>  s22=00000000 s23=00000000 d11=0000000000000000
>  s24=00000000 s25=00000000 d12=0000000000000000
>  s26=00000000 s27=00000000 d13=0000000000000000
>  s28=00000000 s29=00000000 d14=0000000000000000
>  s30=00000000 s31=00000000 d15=0000000000000000
>  FPSCR: 00000000
>  [1]    1322 abort      qemu-system-arm -device virtio-net,netdev=user.0 
> -drive  -netdev  -cdrom  -m
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1500175/+subscriptions

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1500175

Title:
  unable to init msix vectors

Status in QEMU:
  Invalid

Bug description:
  Using the latest stable (2.4.0.1) and earlier releases (at least down
  to 2.2.1), I am unable to run a qemu-system-arm virtualization on a
  Mac OS X Yosemite machine. QEMU was compiled with --enable-sdl.

  Command line:

  qemu-system-arm -device virtio-net,netdev=user.0 -drive
  file=pack,if=virtio,cache=writeback,discard=ignore -netdev
  user,id=user.0,hostfwd=tcp::3499-:22 -cdrom
  /opt/node-4.1.0/packer/2015-05-05-raspbian-wheezy.img -m 512M -boot
  once=d -vnc 0.0.0.0:87 -name packer-qemu -machine type=versatilepb
  -nographic

  Output:

  qemu-system-arm: -device virtio-net,netdev=user.0: unable to init msix 
vectors to 3
  qemu-system-arm: -drive file=pack,if=virtio,cache=writeback,discard=ignore: 
unable to init msix vectors to 2
  qemu: fatal: Trying to execute code outside RAM or ROM at 0x10000000

  R00=00000000 R01=00000000 R02=00000000 R03=00000000
  R04=00000000 R05=00000000 R06=00000000 R07=00000000
  R08=00000000 R09=00000000 R10=00000000 R11=00000000
  R12=00000000 R13=00000000 R14=00000000 R15=10000000
  PSR=400001d3 -Z-- A svc32
  s00=00000000 s01=00000000 d00=0000000000000000
  s02=00000000 s03=00000000 d01=0000000000000000
  s04=00000000 s05=00000000 d02=0000000000000000
  s06=00000000 s07=00000000 d03=0000000000000000
  s08=00000000 s09=00000000 d04=0000000000000000
  s10=00000000 s11=00000000 d05=0000000000000000
  s12=00000000 s13=00000000 d06=0000000000000000
  s14=00000000 s15=00000000 d07=0000000000000000
  s16=00000000 s17=00000000 d08=0000000000000000
  s18=00000000 s19=00000000 d09=0000000000000000
  s20=00000000 s21=00000000 d10=0000000000000000
  s22=00000000 s23=00000000 d11=0000000000000000
  s24=00000000 s25=00000000 d12=0000000000000000
  s26=00000000 s27=00000000 d13=0000000000000000
  s28=00000000 s29=00000000 d14=0000000000000000
  s30=00000000 s31=00000000 d15=0000000000000000
  FPSCR: 00000000
  [1]    1322 abort      qemu-system-arm -device virtio-net,netdev=user.0 
-drive  -netdev  -cdrom  -m

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1500175/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]