Re: [Qemu-devel] [PATCH 1/5] ide/atapi: make PIO read requests async

[John Snow]

On 10/06/2015 04:57 AM, Kevin Wolf wrote:
> Am 05.10.2015 um 23:15 hat John Snow geschrieben:
>>
>>
>> On 09/21/2015 08:25 AM, Peter Lieven wrote:
>>> PIO read requests on the ATAPI interface used to be sync blk requests.
>>> This has to siginificant drawbacks. First the main loop hangs util an
>>> I/O request is completed and secondly if the I/O request does not
>>> complete (e.g. due to an unresponsive storage) Qemu hangs completely.
>>>
>>> Signed-off-by: Peter Lieven <address@hidden>
>>> ---
>>>  hw/ide/atapi.c | 69 
>>> ++++++++++++++++++++++++++++++++++++----------------------
>>>  1 file changed, 43 insertions(+), 26 deletions(-)
>>>
>>> diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
>>> index 747f466..9257e1c 100644
>>> --- a/hw/ide/atapi.c
>>> +++ b/hw/ide/atapi.c
>>> @@ -105,31 +105,51 @@ static void cd_data_to_raw(uint8_t *buf, int lba)
>>>      memset(buf, 0, 288);
>>>  }
>>>  
>>> -static int cd_read_sector(IDEState *s, int lba, uint8_t *buf, int 
>>> sector_size)
>>> +static void cd_read_sector_cb(void *opaque, int ret)
>>>  {
>>> -    int ret;
>>> +    IDEState *s = opaque;
>>>  
>>> -    switch(sector_size) {
>>> -    case 2048:
>>> -        block_acct_start(blk_get_stats(s->blk), &s->acct,
>>> -                         4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ);
>>> -        ret = blk_read(s->blk, (int64_t)lba << 2, buf, 4);
>>> -        block_acct_done(blk_get_stats(s->blk), &s->acct);
>>> -        break;
>>> -    case 2352:
>>> -        block_acct_start(blk_get_stats(s->blk), &s->acct,
>>> -                         4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ);
>>> -        ret = blk_read(s->blk, (int64_t)lba << 2, buf + 16, 4);
>>> -        block_acct_done(blk_get_stats(s->blk), &s->acct);
>>> -        if (ret < 0)
>>> -            return ret;
>>> -        cd_data_to_raw(buf, lba);
>>> -        break;
>>> -    default:
>>> -        ret = -EIO;
>>> -        break;
>>> +    block_acct_done(blk_get_stats(s->blk), &s->acct);
>>> +
>>> +    if (ret < 0) {
>>> +        ide_atapi_io_error(s, ret);
>>> +        return;
>>> +    }
>>> +
>>> +    if (s->cd_sector_size == 2352) {
>>> +        cd_data_to_raw(s->io_buffer, s->lba);
>>>      }
>>> -    return ret;
>>> +
>>> +    s->lba++;
>>> +    s->io_buffer_index = 0;
>>> +    s->status &= ~BUSY_STAT;
>>> +
>>> +    ide_atapi_cmd_reply_end(s);
>>> +}
>>> +
>>> +static int cd_read_sector(IDEState *s, int lba, void *buf, int sector_size)
>>> +{
>>> +    if (sector_size != 2048 && sector_size != 2352) {
>>> +        return -EINVAL;
>>> +    }
>>> +
>>> +    s->iov.iov_base = buf;
>>> +    if (sector_size == 2352) {
>>> +        buf += 4;
>>> +    }
> 
> This doesn't look quite right, buf is never read after this.
> 
> Also, why +=4 when it was originally buf + 16?
> 
>>> +
>>> +    s->iov.iov_len = 4 * BDRV_SECTOR_SIZE;
>>> +    qemu_iovec_init_external(&s->qiov, &s->iov, 1);
>>> +
>>> +    if (blk_aio_readv(s->blk, (int64_t)lba << 2, &s->qiov, 4,
>>> +                      cd_read_sector_cb, s) == NULL) {
>>> +        return -EIO;
>>> +    }
>>> +
>>> +    block_acct_start(blk_get_stats(s->blk), &s->acct,
>>> +                     4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ);
>>> +    s->status |= BUSY_STAT;
>>> +    return 0;
>>>  }
>>>  
>>
>> We discussed this off-list a bit, but for upstream synchronization:
>>
>> Unfortunately, I believe making cd_read_sector here non-blocking makes
>> ide_atapi_cmd_reply_end non-blocking, and as a result makes calls to
>> s->end_transfer_func() nonblocking, which functions like ide_data_readw
>> are not prepared to cope with.
> 
> I don't think that's a problem as long as BSY is set while the
> asynchronous command is running and DRQ is cleared. The latter will
> protect ide_data_readw(). ide_sector_read() does essentially the same
> thing.
> 
> Or maybe I'm just missing what you're trying to say.
> 

It will be correct from a code standpoint, but I don't think the guest
*expects* DRQ to become re-set before byte_count_limit is exhausted.

In the synchronous version of the code, DRQ flickers while we rebuffer
s->io_buffer, but since it's synchronous, the guest *never sees this*.

The guest does not necessarily have any reason or motivation to check if
DRQ is still set after 2048 bytes -- is that recommended in the spec?

("Warning! The drive may decide to rebuffer arbitrarily while you read,
so check if DRQ is still set before each read to the data register!" ??)

>> My suggestion is to buffer an entire DRQ block of data at once
>> (byte_count_limit) to avoid the problem.
> 
> No matter whether there is a problem or not, buffering more data at once
> (and therefore doing less requests) is better for performance anyway.
> 
> Kevin
> 
>>>  void ide_atapi_cmd_ok(IDEState *s)
>>> @@ -190,10 +210,8 @@ void ide_atapi_cmd_reply_end(IDEState *s)
>>>              ret = cd_read_sector(s, s->lba, s->io_buffer, 
>>> s->cd_sector_size);
>>>              if (ret < 0) {
>>>                  ide_atapi_io_error(s, ret);
>>> -                return;
>>>              }
>>> -            s->lba++;
>>> -            s->io_buffer_index = 0;
>>> +            return;
>>>          }
>>>          if (s->elementary_transfer_size > 0) {
>>>              /* there are some data left to transmit in this elementary
>>> @@ -275,7 +293,6 @@ static void ide_atapi_cmd_read_pio(IDEState *s, int 
>>> lba, int nb_sectors,
>>>      s->io_buffer_index = sector_size;
>>>      s->cd_sector_size = sector_size;
>>>  
>>> -    s->status = READY_STAT | SEEK_STAT;
>>>      ide_atapi_cmd_reply_end(s);
>>>  }
>>>  
>>>