qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/4] ide: add support for cancelable read requests


From: Peter Lieven
Subject: [Qemu-devel] [PATCH 3/4] ide: add support for cancelable read requests
Date: Mon, 12 Oct 2015 14:27:24 +0200

this patch adds a new aio readv compatible function which copies
all data through a bounce buffer. The benefit is that these requests
can be flagged as canceled to avoid guest memory corruption when
a canceled request is completed by the backend at a later stage.

If an IDE protocol wants to use this function it has to pipe
all read requests through ide_readv_cancelable and it may then
enable requests_cancelable in the IDEState.

If this state is enable we can avoid the blocking blk_drain_all
in case of a BMDMA reset.

Currently only read operations are cancelable thus we can only
use this logic for read-only devices.

Signed-off-by: Peter Lieven <address@hidden>
---
 hw/ide/core.c     | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/ide/internal.h | 16 ++++++++++++++++
 hw/ide/pci.c      | 42 ++++++++++++++++++++++++++++--------------
 3 files changed, 98 insertions(+), 14 deletions(-)

diff --git a/hw/ide/core.c b/hw/ide/core.c
index 317406d..24547ce 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -561,6 +561,59 @@ static bool ide_sect_range_ok(IDEState *s,
     return true;
 }
 
+static void ide_readv_cancelable_cb(void *opaque, int ret)
+{
+    IDECancelableRequest *req = opaque;
+    if (!req->canceled) {
+        if (!ret) {
+            qemu_iovec_from_buf(req->org_qiov, 0, req->buf, 
req->org_qiov->size);
+        }
+        req->org_cb(req->org_opaque, ret);
+    }
+    QLIST_REMOVE(req, list);
+    qemu_vfree(req->buf);
+    qemu_iovec_destroy(&req->qiov);
+    g_free(req);
+}
+
+#define MAX_CANCELABLE_REQS 16
+
+BlockAIOCB *ide_readv_cancelable(IDEState *s, int64_t sector_num,
+                                 QEMUIOVector *iov, int nb_sectors,
+                                 BlockCompletionFunc *cb, void *opaque)
+{
+    BlockAIOCB *aioreq;
+    IDECancelableRequest *req;
+    int c = 0;
+
+    QLIST_FOREACH(req, &s->cancelable_requests, list) {
+        c++;
+    }
+    if (c > MAX_CANCELABLE_REQS) {
+        return NULL;
+    }
+
+    req = g_new0(IDECancelableRequest, 1);
+    qemu_iovec_init(&req->qiov, 1);
+    req->buf = qemu_blockalign(blk_bs(s->blk), iov->size);
+    qemu_iovec_add(&req->qiov, req->buf, iov->size);
+    req->org_qiov = iov;
+    req->org_cb = cb;
+    req->org_opaque = opaque;
+
+    aioreq = blk_aio_readv(s->blk, sector_num, &req->qiov, nb_sectors,
+                           ide_readv_cancelable_cb, req);
+    if (aioreq == NULL) {
+        qemu_vfree(req->buf);
+        qemu_iovec_destroy(&req->qiov);
+        g_free(req);
+    } else {
+        QLIST_INSERT_HEAD(&s->cancelable_requests, req, list);
+    }
+
+    return aioreq;
+}
+
 static void ide_sector_read(IDEState *s);
 
 static void ide_sector_read_cb(void *opaque, int ret)
@@ -805,6 +858,7 @@ void ide_start_dma(IDEState *s, BlockCompletionFunc *cb)
     s->bus->retry_unit = s->unit;
     s->bus->retry_sector_num = ide_get_sector(s);
     s->bus->retry_nsector = s->nsector;
+    s->bus->s = s;
     if (s->bus->dma->ops->start_dma) {
         s->bus->dma->ops->start_dma(s->bus->dma, s, cb);
     }
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 05e93ff..ad188c2 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -343,6 +343,16 @@ enum ide_dma_cmd {
 #define ide_cmd_is_read(s) \
        ((s)->dma_cmd == IDE_DMA_READ)
 
+typedef struct IDECancelableRequest {
+    QLIST_ENTRY(IDECancelableRequest) list;
+    QEMUIOVector qiov;
+    uint8_t *buf;
+    QEMUIOVector *org_qiov;
+    BlockCompletionFunc *org_cb;
+    void *org_opaque;
+    bool canceled;
+} IDECancelableRequest;
+
 /* NOTE: IDEState represents in fact one drive */
 struct IDEState {
     IDEBus *bus;
@@ -396,6 +406,8 @@ struct IDEState {
     BlockAIOCB *pio_aiocb;
     struct iovec iov;
     QEMUIOVector qiov;
+    QLIST_HEAD(, IDECancelableRequest) cancelable_requests;
+    bool requests_cancelable;
     /* ATA DMA state */
     int32_t io_buffer_offset;
     int32_t io_buffer_size;
@@ -468,6 +480,7 @@ struct IDEBus {
     uint8_t retry_unit;
     int64_t retry_sector_num;
     uint32_t retry_nsector;
+    IDEState *s;
 };
 
 #define TYPE_IDE_DEVICE "ide-device"
@@ -572,6 +585,9 @@ void ide_set_inactive(IDEState *s, bool more);
 BlockAIOCB *ide_issue_trim(BlockBackend *blk,
         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
         BlockCompletionFunc *cb, void *opaque);
+BlockAIOCB *ide_readv_cancelable(IDEState *s, int64_t sector_num,
+                                 QEMUIOVector *iov, int nb_sectors,
+                                 BlockCompletionFunc *cb, void *opaque);
 
 /* hw/ide/atapi.c */
 void ide_atapi_cmd(IDEState *s);
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index d31ff88..5587183 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -240,21 +240,35 @@ void bmdma_cmd_writeb(BMDMAState *bm, uint32_t val)
     /* Ignore writes to SSBM if it keeps the old value */
     if ((val & BM_CMD_START) != (bm->cmd & BM_CMD_START)) {
         if (!(val & BM_CMD_START)) {
-            /*
-             * We can't cancel Scatter Gather DMA in the middle of the
-             * operation or a partial (not full) DMA transfer would reach
-             * the storage so we wait for completion instead (we beahve
-             * like if the DMA was completed by the time the guest trying
-             * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not
-             * set).
-             *
-             * In the future we'll be able to safely cancel the I/O if the
-             * whole DMA operation will be submitted to disk with a single
-             * aio operation with preadv/pwritev.
-             */
             if (bm->bus->dma->aiocb) {
-                blk_drain_all();
-                assert(bm->bus->dma->aiocb == NULL);
+                if (bm->bus->s && bm->bus->s->requests_cancelable) {
+                    /*
+                     * If the used IDE protocol supports request cancelation we
+                     * can flag requests as canceled here and disable DMA.
+                     * The IDE protocol used MUST use ide_readv_cancelable for 
all
+                     * read operations and then subsequently can enable this 
code
+                     * path. Currently this is only supported for read-only
+                     * devices.
+                    */
+                    IDECancelableRequest *req;
+                    QLIST_FOREACH(req, &bm->bus->s->cancelable_requests, list) 
{
+                        if (!req->canceled) {
+                            req->org_cb(req->org_opaque, -ECANCELED);
+                        }
+                        req->canceled = true;
+                    }
+                } else {
+                    /*
+                     * We can't cancel Scatter Gather DMA in the middle of the
+                     * operation or a partial (not full) DMA transfer would 
reach
+                     * the storage so we wait for completion instead (we beahve
+                     * like if the DMA was completed by the time the guest 
trying
+                     * to cancel dma with bmdma_cmd_writeb with BM_CMD_START 
not
+                     * set).
+                     */
+                    blk_drain_all();
+                    assert(bm->bus->dma->aiocb == NULL);
+                }
             }
             bm->status &= ~BM_STATUS_DMAING;
         } else {
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]