[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH COLO-Frame v9 08/32] COLO/migration: establish a
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH COLO-Frame v9 08/32] COLO/migration: establish a new communication path from destination to source |
Date: |
Tue, 20 Oct 2015 20:32:57 +0100 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
* zhanghailiang (address@hidden) wrote:
> On 2015/10/19 17:54, Dr. David Alan Gilbert wrote:
> >* zhanghailiang (address@hidden) wrote:
> >>Add a new member 'to_src_file' to MigrationIncomingState and a
> >>new member 'from_dst_file' to MigrationState.
> >>They will be used for returning messages from destination to source.
> >>It will also be used by post-copy migration.
> >>
> >>Signed-off-by: zhanghailiang <address@hidden>
> >>Signed-off-by: Li Zhijian <address@hidden>
> >>Cc: Dr. David Alan Gilbert <address@hidden>
> >>---
> >> include/migration/migration.h | 3 ++-
> >> migration/colo.c | 43
> >> +++++++++++++++++++++++++++++++++++++++++++
> >> 2 files changed, 45 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/include/migration/migration.h b/include/migration/migration.h
> >>index 6488e03..0c94103 100644
> >>--- a/include/migration/migration.h
> >>+++ b/include/migration/migration.h
> >>@@ -50,7 +50,7 @@ typedef QLIST_HEAD(, LoadStateEntry) LoadStateEntry_Head;
> >> /* State for the incoming migration */
> >> struct MigrationIncomingState {
> >> QEMUFile *from_src_file;
> >>-
> >>+ QEMUFile *to_src_file;
> >> int state;
> >>
> >> bool have_colo_incoming_thread;
> >>@@ -74,6 +74,7 @@ struct MigrationState
> >> QemuThread thread;
> >> QEMUBH *cleanup_bh;
> >> QEMUFile *to_dst_file;
> >>+ QEMUFile *from_dst_file;
> >> int parameters[MIGRATION_PARAMETER_MAX];
> >>
> >> int state;
> >>diff --git a/migration/colo.c b/migration/colo.c
> >>index a341eee..5f4fb20 100644
> >>--- a/migration/colo.c
> >>+++ b/migration/colo.c
> >>@@ -39,6 +39,20 @@ bool migration_incoming_in_colo_state(void)
> >> static void *colo_thread(void *opaque)
> >> {
> >> MigrationState *s = opaque;
> >>+ int fd, ret = 0;
> >>+
> >>+ /* Dup the fd of to_dst_file */
> >>+ fd = dup(qemu_get_fd(s->to_dst_file));
> >>+ if (fd == -1) {
> >>+ ret = -errno;
> >>+ goto out;
> >>+ }
> >>+ s->from_dst_file = qemu_fopen_socket(fd, "rb");
> >
> >In my postcopy code I add the return-path opening as a new
> >method on QEMUFile, that way if we get a return path working
> >on another transport (RDMA which I hope to do) then it
> >works; have a look at 'Return path: Open a return path on QEMUFile for
> >sockets'
> >
>
> I have looked at it. That's a good solution, we use the same fd for return
> path, and
> i don't have to call qemu_file_shutdown two times in failover process.
>
> >>+ if (!s->from_dst_file) {
> >>+ ret = -EINVAL;
> >>+ error_report("Open QEMUFile failed!");
> >
> >In errors, try to give detail of where a problem was;
> >e.g. 'colo_thread: Open QEMUFile from_dst failed'.
> >
>
> OK. I will fix it in next version.
>
> >>+ goto out;
> >>+ }
> >>
> >> qemu_mutex_lock_iothread();
> >> vm_start();
> >>@@ -47,9 +61,17 @@ static void *colo_thread(void *opaque)
> >>
> >> /*TODO: COLO checkpoint savevm loop*/
> >>
> >>+out:
> >>+ if (ret < 0) {
> >>+ error_report("Detect some error: %s", strerror(-ret));
> >>+ }
> >
> >Again, best to say where the error happened.
> >
>
> Hmm, it is a little difficult to say where exactly this error happened here,
> what i can do is to error out in the place where the error happened.
> Here is only a summary for the error.
OK, just add the function name then, e.g.
error_report("%s: %s", __func__, strerror(-ret));
it just helps when you're looking at a log file, to understand where it came
from; especially if the person who sent you the log file didn't tell you much
:-)
Dave
>
> >
> >> migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
> >> MIGRATION_STATUS_COMPLETED);
> >>
> >>+ if (s->from_dst_file) {
> >>+ qemu_fclose(s->from_dst_file);
> >>+ }
> >>+
> >> qemu_mutex_lock_iothread();
> >> qemu_bh_schedule(s->cleanup_bh);
> >> qemu_mutex_unlock_iothread();
> >>@@ -86,12 +108,33 @@ void colo_init_checkpointer(MigrationState *s)
> >> void *colo_process_incoming_thread(void *opaque)
> >> {
> >> MigrationIncomingState *mis = opaque;
> >>+ int fd, ret = 0;
> >>
> >> migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
> >> MIGRATION_STATUS_COLO);
> >>
> >>+ fd = dup(qemu_get_fd(mis->from_src_file));
> >>+ if (fd < 0) {
> >>+ ret = -errno;
> >>+ goto out;
> >>+ }
> >>+ mis->to_src_file = qemu_fopen_socket(fd, "wb");
> >>+ if (!mis->to_src_file) {
> >>+ ret = -EINVAL;
> >>+ error_report("Can't open incoming channel!");
> >>+ goto out;
> >>+ }
> >
> >Same as above.
>
> OK. Will fix it.
>
> Thanks,
> zhanghailiang
> >
> >> /* TODO: COLO checkpoint restore loop */
> >>
> >>+out:
> >>+ if (ret < 0) {
> >
> >>+ error_report("colo incoming thread will exit, detect error: %s",
> >>+ strerror(-ret));
> >>+ }
> >>+
> >>+ if (mis->to_src_file) {
> >>+ qemu_fclose(mis->to_src_file);
> >>+ }
> >> migration_incoming_exit_colo();
> >>
> >> return NULL;
> >>--
> >>1.8.3.1
> >>
> >>
> >--
> >Dr. David Alan Gilbert / address@hidden / Manchester, UK
> >
> >.
> >
>
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK