Re: [Qemu-devel] [RFC Patch 08/12] IXGBEVF: Rework code of finding the end transmit desc of package

[Alexander Duyck]

On 10/21/2015 09:37 AM, Lan Tianyu wrote:
> When transmit a package, the end transmit desc of package
> indicates whether package is sent already. Current code records
> the end desc's pointer in the next_to_watch of struct tx buffer.
> This code will be broken if shifting desc ring after migration.
> The pointer will be invalid. This patch is to replace recording
> pointer with recording the desc number of the package and find
> the end decs via the first desc and desc number.
>
> Signed-off-by: Lan Tianyu <address@hidden>
> ---
>   drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  1 +
>   drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 19 ++++++++++++++++---
>   2 files changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h 
> b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> index 775d089..c823616 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> @@ -54,6 +54,7 @@
>    */
>   struct ixgbevf_tx_buffer {
>         union ixgbe_adv_tx_desc *next_to_watch;
> +       u16 desc_num;
>         unsigned long time_stamp;
>         struct sk_buff *skb;
>         unsigned int bytecount;

So if you can't use next_to_watch why is it left in here?  Also you 
might want to take a look at moving desc_num to a different spot in the 
buffer as you are leaving a 6 byte hole in the descriptor.

> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c 
> b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> index 4446916..056841c 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> @@ -210,6 +210,7 @@ static void ixgbevf_unmap_and_free_tx_resource(struct 
> ixgbevf_ring *tx_ring,
>                                DMA_TO_DEVICE);
>         }
>         tx_buffer->next_to_watch = NULL;
> +       tx_buffer->desc_num = 0;
>         tx_buffer->skb = NULL;
>         dma_unmap_len_set(tx_buffer, len, 0);

This opens up a race condition.  If you have a descriptor ready to be 
cleaned at offset 0 what is to prevent you from just running through the 
ring?  You likely need to find a descriptor number that cannot be valid 
to use here.

>         /* tx_buffer must be completely set up in the transmit path */
> @@ -295,7 +296,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector 
> *q_vector,
>         union ixgbe_adv_tx_desc *tx_desc;
>         unsigned int total_bytes = 0, total_packets = 0;
>         unsigned int budget = tx_ring->count / 2;
> -       unsigned int i = tx_ring->next_to_clean;
> +       int i, watch_index;
>   

Where is i being initialized?  It was here but you removed it.  Are you 
using i without initializing it?

>         if (test_bit(__IXGBEVF_DOWN, &adapter->state))
>                 return true;
> @@ -305,9 +306,17 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector 
> *q_vector,
>         i -= tx_ring->count;
>   
>   	do {
> -               union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
> +               union ixgbe_adv_tx_desc *eop_desc;
> +
> +               if (!tx_buffer->desc_num)
> +                       break;
> +
> +               if (i + tx_buffer->desc_num >= 0)
> +                       watch_index = i + tx_buffer->desc_num;
> +               else
> +                       watch_index = i + tx_ring->count + tx_buffer->desc_num;
>   
> -		/* if next_to_watch is not set then there is no work pending */
> +               eop_desc = IXGBEVF_TX_DESC(tx_ring, watch_index);
>                 if (!eop_desc)
>                         break;
>   

So I don't see how this isn't triggering Tx hangs.  I suspect for the 
simple ping case desc_num will often be 0.  The fact is there are many 
cases where first and tx_buffer_info are the same descriptor.

> @@ -320,6 +329,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector 
> *q_vector,
>   
>   		/* clear next_to_watch to prevent false hangs */
>                 tx_buffer->next_to_watch = NULL;
> +               tx_buffer->desc_num = 0;
>   
>   		/* update the statistics for this packet */
>                 total_bytes += tx_buffer->bytecount;

You cannot use 0 because 0 is a valid number.  You are using it as a 
look-ahead currently and there are cases where i is the eop_desc index.

> @@ -3457,6 +3467,7 @@ static void ixgbevf_tx_map(struct ixgbevf_ring *tx_ring,
>         u32 tx_flags = first->tx_flags;
>         __le32 cmd_type;
>         u16 i = tx_ring->next_to_use;
> +       u16 start;
>   
>   	tx_desc = IXGBEVF_TX_DESC(tx_ring, i);
>   
> @@ -3540,6 +3551,8 @@ static void ixgbevf_tx_map(struct ixgbevf_ring *tx_ring,
>   
>   	/* set next_to_watch value indicating a packet is present */
>         first->next_to_watch = tx_desc;
> +       start = first - tx_ring->tx_buffer_info;
> +       first->desc_num = (i - start >= 0) ? i - start: i + tx_ring->count - 
> start;
>   
>   	i++;
>         if (i == tx_ring->count)

start and i could be the same value.  If you look at ixgbevf_tx_map you 
should find that if the packet is contained in a single buffer then the 
first and last descriptor in your send will be the same one.