qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] hw/isa/lpc_ich9: inject the SMI on the VCPU tha


From: Paolo Bonzini
Subject: Re: [Qemu-devel] [PATCH] hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
Date: Fri, 23 Oct 2015 09:26:38 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.3.0


On 23/10/2015 06:41, Jordan Justen wrote:
> On 2015-10-22 12:46:56, Paolo Bonzini wrote:
>>
>> On 22/10/2015 20:04, Kevin O'Connor wrote:
>>> On Thu, Oct 22, 2015 at 10:40:08AM +0200, Paolo Bonzini wrote:
>>>> On 21/10/2015 20:36, Jordan Justen wrote:
>>>>> On 2015-10-20 11:14:00, Laszlo Ersek wrote:
>>>>>> Commit 4d00636e97b7 ("ich9: Add the lpc chip", Nov 14 2012) added the
>>>>>> ich9_apm_ctrl_changed() ioport write callback function such that it would
>>>>>> inject the SMI, in response to a write to the APM_CNT register, on the
>>>>>> first CPU, invariably.
>>>>>>
>>>>>> Since this register is used by guest code to trigger an SMI 
>>>>>> synchronously,
>>>>>> the interrupt should be injected on the VCPU that is performing the 
>>>>>> write.
>>>>>
>>>>> Why not send an SMI to *all* processors, like the real chipsets do?
>>>>
>>>> That's much less scalable, and more important I would have to check that
>>>> SeaBIOS can handle that correctly.  It probably doesn't, as it doesn't
>>>> relocate SMBASEs.
>>>
>>> SeaBIOS is only expecting its SMI handler to be called once in
>>> response to a synchronous SMI.  We can change SeaBIOS to fix that.
>>>
>>> SeaBIOS does relocate the smbase from 0x30000 to 0xa0000 during its
>>> init phase (by creating a synchronous SMI on the BSP and then setting
>>> the smbase register to 0xa0000 in the smi handler).
>>
>> Right; however it would also have to relocate the SMBASE on the APs (in
>> case they were halted with cli;hlt and not INITed).  It's really not
>> worth the hassle,
> 
> It's not worth the hassle to relocate the SMBASE of the APs?
> So, basically, write to 0x30000-0x38000, then send an SMI IPI to the
> AP and now you have the AP running in SMI and it has extra privileges?

Extra privileges compared to what?  Legacy BIOS does not really put
anything privileged in SMRAM, while OVMF does and _hence_ relocates the
SMBASE of the AP.  It would have been nice to get it right from the
beginning, but right now it's not worth forcing a lockstep QEMU-SeaBIOS
update.

Paolo



reply via email to

[Prev in Thread] Current Thread [Next in Thread]