[Qemu-devel] [PATCH 8/9] qtest/ahci: ATAPI data tests

[John Snow]

Simple I/O tests for DMA and PIO pathways in the AHCI HBA.

I believe at this point in time all of the common, major IO pathways
in BMDMA and AHCI are covered by qtests now.

Signed-off-by: John Snow <address@hidden>
---
 tests/ahci-test.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 2cd4809..d7b677d 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1395,6 +1395,98 @@ static void test_ncq_simple(void)
     ahci_shutdown(ahci);
 }
 
+static int prepare_iso(size_t size, unsigned char **buf, char **name)
+{
+    char cdrom_path[] = "/tmp/qtest.iso.XXXXXX";
+    unsigned char *patt;
+    ssize_t ret;
+    int fd = mkstemp(cdrom_path);
+
+    g_assert(buf);
+    g_assert(name);
+    patt = g_malloc(size);
+
+    /* Generate a pattern and build a CDROM image to read from */
+    generate_pattern(patt, size, ATAPI_SECTOR_SIZE);
+    ret = write(fd, patt, size);
+    g_assert(ret == size);
+
+    *name = g_strdup(cdrom_path);
+    *buf = patt;
+    return fd;
+}
+
+static void remove_iso(int fd, char *name)
+{
+    unlink(name);
+    g_free(name);
+    close(fd);
+}
+
+static int ahci_cb_cmp_buff(AHCIQState *ahci, AHCICommand *cmd,
+                            const AHCIOpts *opts)
+{
+    unsigned char *tx = opts->opaque;
+    unsigned char *rx = g_malloc0(opts->size);
+
+    bufread(opts->buffer, rx, opts->size);
+    g_assert_cmphex(memcmp(tx, rx, opts->size), ==, 0);
+    g_free(rx);
+
+    return 0;
+}
+
+static void ahci_test_cdrom(int nsectors, bool dma)
+{
+    AHCIQState *ahci;
+    unsigned char *tx;
+    char *iso;
+    int fd;
+    AHCIOpts opts = {
+        .size = (ATAPI_SECTOR_SIZE * nsectors),
+        .atapi = true,
+        .atapi_dma = dma,
+        .post_cb = ahci_cb_cmp_buff,
+    };
+
+    /* Prepare ISO and fill 'tx' buffer */
+    fd = prepare_iso(1024 * 1024, &tx, &iso);
+    opts.opaque = tx;
+
+    /* Standard startup wonkery, but use ide-cd and our special iso file */
+    ahci = ahci_boot_and_enable("-drive if=none,id=drive0,file=%s,format=raw "
+                                "-M q35 "
+                                "-device ide-cd,drive=drive0 ", iso);
+
+    /* Build & Send AHCI command */
+    ahci_exec(ahci, ahci_port_select(ahci), CMD_ATAPI_READ_10, &opts);
+
+    /* Cleanup */
+    g_free(tx);
+    ahci_shutdown(ahci);
+    remove_iso(fd, iso);
+}
+
+static void test_cdrom_dma(void)
+{
+    ahci_test_cdrom(1, true);
+}
+
+static void test_cdrom_dma_multi(void)
+{
+    ahci_test_cdrom(3, true);
+}
+
+static void test_cdrom_pio(void)
+{
+    ahci_test_cdrom(1, false);
+}
+
+static void test_cdrom_pio_multi(void)
+{
+    ahci_test_cdrom(3, false);
+}
+
 
/******************************************************************************/
 /* AHCI I/O Test Matrix Definitions                                           
*/
 
@@ -1653,6 +1745,11 @@ int main(int argc, char **argv)
     qtest_add_func("/ahci/io/ncq/retry", test_halted_ncq);
     qtest_add_func("/ahci/migrate/ncq/halted", test_migrate_halted_ncq);
 
+    qtest_add_func("/ahci/cdrom/dma/single", test_cdrom_dma);
+    qtest_add_func("/ahci/cdrom/dma/multi", test_cdrom_dma_multi);
+    qtest_add_func("/ahci/cdrom/pio/single", test_cdrom_pio);
+    qtest_add_func("/ahci/cdrom/pio/multi", test_cdrom_pio_multi);
+
     ret = g_test_run();
 
     /* Cleanup */
-- 
2.4.3